• 제목/요약/키워드: High-frequency-link

검색결과 325건 처리시간 0.035초

내진여유도 평가를 위한 부석기준지진동(RLGM) 평가 연구 (A Study on Review-Level Ground Motion For Seismic Margin Assessment)

  • 연관희;이종림
    • 한국지진공학회:학술대회논문집
    • /
    • 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
    • /
    • pp.97-104
    • /
    • 2000
  • Evaluating a Review-Level Ground Motion is a key to efficiently perform Seismic Margin Assessment of nuclear power plants whose purpose is to determine a ground motion level for which a plant has high-confidence-of-a-low-probability of seismic-induced core damage and to identify any weaker-link components. In this study a method to obtain RLGMs is reviewed which is recommended by Electric Power Research Institute and implemented to be applied to Limerick site in eastern and central U. S as a case study. This method provides reasonable and site-specific RLGMs as minimum required plant HCLPF for SMA that meet a target mean seismic core-damage frequency based on seismic hazard results and generic values of uncertainty and randomness parameters of the core-damage fragility curves. In addition high-frequency RLGM is justifiably modified to reflect the increased seismic capacity of high-frequency components and spatial variation and incoherence of input ground motion on a basemat of large structures by establishing a method to obtain high0-frequency reduction factors according to EPRI guidelines.

  • PDF

고주파링크 방식의 계통연계형 태양광발전시스템 (High frequency Linked Grid-Connected PV System for Residential Use)

  • 정영석;유권종;이수홍
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 하계학술대회 논문집 B
    • /
    • pp.1281-1283
    • /
    • 2001
  • An investigation into power conditioners that interface with photovoltaic array and utilities has been completed. The rating for this investigation is residential system(3-5kW) that interface with a 220V single phase utility connection. As the result of this investigation, a 3kW high frequency PWM IGBT inverter feeding a high frequency isolation transformer with a sinusoidal current wave was selected. The output of the transformer rectified with a diode bridge rectifier four IGBT, used as 60Hz switched, reverse the polarity of the rectified current on every other half cycle of the utility voltage. Even though the high frequency link system used more power semiconductors a net size, weight, and parts cost saying result compared to the other systems due to elimination of 60Hz transformer.

  • PDF

고주파링크 방식을 이용한 계통연계형 태양광발전시스템 (High frequency Linked Grid-Connected PV System for Residential Use)

  • 정영석;유권종;이수홍
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
    • /
    • pp.467-469
    • /
    • 2001
  • An investigation into power conditioners that interface with photovoltaic array and utilities has been completed. The rating for this investigation is residential system(3-5kW) that interface with a 220V single phase utility connection. As the result of this investigation, a 3kW high frequency PWM IGBT inverter feeding a high frequency isolation transformer with a sinusoidal current wave was selected. The output of the transformer rectified with a diode bridge rectifier, four IGBT, used as 60Hz switched, reverse the polarity of the rectified current on every other half cycle of the utility voltage. Even though the high frequency link system used more power semiconductors, a net size, weight, and parts cost saving result compared to the other systems due to elimination of 60Hz transformer.

  • PDF

Ka 대역 광대역 MMIC 전력증폭기 (PHEMT MMIC Broad-Band Power Amplifier for LMDS)

  • 백경식;김영기;맹성재;이진희;박철순
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.177-180
    • /
    • 1999
  • A two-stage monolithic microwave integrated circuits (MMIC) broad-band power amplifier with AlGaAs/InGaAs/GaAs pseudomorphic high electron mobility transistor (PHEMT) has been developed for the up-link and down-link applications for local multipoint distribution systems (LMDS) in the frequency range of 24~28㎓. The amplifier has a small signal gain of 18.6㏈ at 24.5㎓ and 16.7㏈ at 27.1㎓. It achieved output powers of 19.8㏈m with PAE of 19.8% at 24.5㎓ and 18.8㏈m at 27.1㎓.

  • PDF

A Bayesian Method for Narrowing the Scope fo Variable Selection in Binary Response t-Link Regression

  • Kim, Hea-Jung
    • Journal of the Korean Statistical Society
    • /
    • 제29권4호
    • /
    • pp.407-422
    • /
    • 2000
  • This article is concerned with the selecting predictor variables to be included in building a class of binary response t-link regression models where both probit and logistic regression models can e approximately taken as members of the class. It is based on a modification of the stochastic search variable selection method(SSVS), intended to propose and develop a Bayesian procedure that used probabilistic considerations for selecting promising subsets of predictor variables. The procedure reformulates the binary response t-link regression setup in a hierarchical truncated normal mixture model by introducing a set of hyperparameters that will be used to identify subset choices. In this setup, the most promising subset of predictors can be identified as that with highest posterior probability in the marginal posterior distribution of the hyperparameters. To highlight the merit of the procedure, an illustrative numerical example is given.

  • PDF

고주파 공진형 방식 X-선 발생장치에 관한 연구 (A Study on High Frequency Resonant Type X-ray Generator)

  • 유동욱;하성운;백주원;김종수;김학성;원충연
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 A
    • /
    • pp.209-211
    • /
    • 1995
  • This paper is concerned with High Frequency, High Voltage Generator for X-ray using zero-voltage soft-switching PWM DC-DC high-power converter by Resonant method, which makes the most of the parastic LC parameters of high-voltage transformer link, for diagnostic X-ray power generator. The converter circuit basically utilizes phase-shift pulse width modulated series Resonant full-bridge PWM DC-DC high-power converter operating at a constant frequency;25kHz. The converter output regulation is digitally controlled using DSP (Digital Signal Processor) for obtaining a fast rising time and adjust output voltage within a wide load range.

  • PDF

고속 자료전송을 위한 비행체용 원격측정링크 개발 (Aeronautical Telemetry Link Development for High Speed Data Transmission)

  • 이상범;최승덕;김환우
    • 전자공학회논문지
    • /
    • 제50권7호
    • /
    • pp.43-51
    • /
    • 2013
  • 본 논문은 초고속 비행체에 탑재하여 대용량 자료를 송수신하는 원격측정링크 개발에 대하여 기술하였다. 고속 이동체 환경에서 고속 자료전송을 위해 기존에 주로 사용되던 PCM/FM 변조방식에 비해 대역폭 효율성, 주파수 선택적 페이딩, 도플러 주파수 옵셋 등을 고려하여 DQPSK 변조방식을 사용하였다. 또한 통신채널 장애의 주요 원인이 되는 멀티패스 간섭을 최소화하기 위해 다수의 수신안테나를 사용하여 공간다이버시티를 구현하였으며 추가적으로 터보코드를 오류정정부호로 사용하여 양질의 데이터를 수신할 수 있도록 개발하였으며 비행시험을 통하여 성능을 확인하였다.

VDL Mode-2 시스템을 위한 수신 알고리듬 설계 및 구현 (Design and Implementation of Receiver Algorithms for VDL Mode-2 Systems)

  • 이희수;강동훈;박효배;오왕록
    • 대한전자공학회논문지TC
    • /
    • 제46권10호
    • /
    • pp.28-33
    • /
    • 2009
  • 본 논문에서는 항공시스템의 데이터 및 음성 통신을 위한 VHF (Very High Frequency) digital link mode-2 (VDL Mode-2) 시스템에 적합한 수신 알고리듬을 제안한다. VDL Mode-2 시스템은 패킷 방식으로 동작하며 이에 따라 최적화된 패킷 검출 알고리듬을 설계하여야 한다. 또한 VDL Mode-2 시스템에서는 송수신 여파기로 각각 제곱근 상승 코사인 여파기를 사용하는 일반적인 디지털 통신 시스템과 달리 점유 주파수 대역 요구사항에 따라 송신 여파기로 상승 코사인 여파기를 사용한다. 따라서 수신기에서는 ISI (inter-symbol interference)와 잡음 특성을 고려하여 최적화된 저역 통과 여파기를 설계하여야 한다. 이와 함께 VDL Mode-2 시스템의 안정적인 동작을 위해서는 송수신기의 반송파 주파수 차이와 도플러 주파수 천이에 의한 주파수 오프셋을 추정하고 보상하여야 한다. 본 논문에서는 VDL Mode-2 시스템을 위한 패킷 검출, 수신 여파기 및 주파수 오프셋 추정 및 보상 알고리듬들을 제안하고 제안한 기법들을 적용한 VDL Mode-2 시스템의 성능을 분석하였다.

Microwave Photonics Frequency-Converted Link Using Electroabsorption Devices

  • Wu, Y.;Shin, D.S.;Chang, W.S.C.;Yu, P.K.L.
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제4권1호
    • /
    • pp.74-81
    • /
    • 2004
  • We propose a novel scheme to transmit high center frequency RF signals using electroabsorption devices (EADs) as frequency converters at the transmitter and the receiver. In this approach frequency heterodyning is employed for obtaining high center frequency. With the EAD as a detector/mixer at the receiver we demonstrated a smaller conversion loss than that of the conventional modulator/mixer. With EAD as a modulator/mixer at the transmitter and with two heterodyned lasers to generate an optical local oscillator (LO), we demonstrated a large reduction (${\sim}23dB$) in conversion loss, and the transmission is not limited by the optical saturation of the EAD. This transmission scheme has optical single-side-band transmission feature which greatly relieves the fiber dispersion effect.

태양광 인버터의 노치 필터 최적 설계 (Optimal Design of Notch Filter in Photovoltaic Inverter)

  • 김용래;허철영;이영권;최익;최주엽
    • 한국태양에너지학회 논문집
    • /
    • 제39권2호
    • /
    • pp.81-92
    • /
    • 2019
  • When Photovoltaic inverter is connected to grid and used as PVPCS (Photovoltaic Power Conditioning System), 120 Hz AC ripple occurs at the dc-link capacitor voltage. This AC ripple reduces the efficiency of PVPCS and shortens the lifetime of the capacitor. In this paper, we design a notch filter to remove AC ripple. As a result, the AC voltage ripple was removed from the dc link and the THD of the PVPCS output current with the notch filter was lowered. This notch filter is determined by the damping coefficient, the bandwidth coefficient, and the switching frequency. Among these, the switching frequency determines the switching loss and the size of the LC filter, and the PVPCS with the high switching frequency has a greater efficiency loss due to the switching loss than the efficiency improvement by the notch filter. Therefore, it is important to set the optimum switching frequency in the PVPCS with the notch filter applied. In this paper, THD and switching loss of PVPCS output current with notch filter are calculated through simulation, and cost function to calculate optimum switching frequency through data is proposed.