• 제목/요약/키워드: High-Gain Beam

검색결과 113건 처리시간 0.033초

Ku-Band용 위성 배열 안테나 설계 및 제작 (The Design and Fabrication of Satellite Array Antenna for Ku-Band)

  • 이한영
    • 전기학회논문지
    • /
    • 제61권11호
    • /
    • pp.1668-1670
    • /
    • 2012
  • In this paper, a satellite array antenna operates at 12.2GHz~12.75GHz was designed and fabricated. The lowest height and high gain electrical beam tilt was obtained by applying backed slot and sub-reflector widening the distance between the patch and the GND. The simulation and measurement showed good agreements, the electrical beam tilt was $10^{\circ}$, the gain was 26.5dBi, the VSWR was less than 3:1 and the return loss was less than -15dB.

270-W 15-kHz MOPA System Based on Side-pumped Rod-type Nd:YAG Gain Modules

  • Cha, Yong-Ho;Yang, Myoung-Yerl;Ko, Kwang-Hoon;Lim, Gwon;Han, Jae-Min;Park, Hyun-Min;Kim, Taek-Soo;Roh, Si-Pyo;Jeong, Do-Young
    • Journal of the Optical Society of Korea
    • /
    • 제12권4호
    • /
    • pp.298-302
    • /
    • 2008
  • We have developed a 270-W 15-kHz MOPA system based on side-pumped rod-type Nd:YAG gain modules. The master oscillator is a 3-W 15-kHz $TEM_{00}$ $Nd:YVO_4$ laser with a pulse duration of 30 ns. To preserve the high beam quality during the amplification, we use image relay and polarization rotation which can simultaneously compensate for thermal lensing and thermal birefringence generated in the rod-type gain modules. After the amplification to 270 W with six rod-type gain modules, the beam quality factor ($M^2$) of the amplified laser beam is 5-10, and the pulse duration is maintained at 30 ns.

Array Antenna Design for Ku-Band Terminal of L.E.O Satellite Communication

  • Kang, Seo;Kang, JeongJin;Rothwell, Edward J.
    • International journal of advanced smart convergence
    • /
    • 제11권4호
    • /
    • pp.41-46
    • /
    • 2022
  • This study is a Ku-band array antenna for the manufacture of low-orbit satellite communication terminals, designed to have miniaturization, high gain, and wide beam width. The transmission of low-orbit satellite communication has a right-rotating circularly polarized wave, and the reception has a left-rotating circularly polarized wave. The 4×8 array antenna was separated for transmission and reception, and it was combined with the RF circuit part of the transmitter and receiver, and was terminated in the form of a waveguide for RF signal impedance matching in the form of a transition from the microstrip line to the waveguide. The 30° beam width of the receiver maximum gain of 19 dBi and the 29° beam width of the transmitter maximum gain of 18 dBi are shown. Through this antenna configuration, the system was configured to suit the low-orbit satellite transmission/reception characteristics.

고이득 특성을 갖는 성형 빔 안테나에 대한 연구 (A Study on the Shaped-Beam Antenna with High Gain Characteristic)

  • 엄순영;윤재훈;전순익;김창주
    • 한국전자파학회논문지
    • /
    • 제18권1호
    • /
    • pp.62-75
    • /
    • 2007
  • 본 논문은 단위 방사 소자의 이득을 증가시키기 위한 성형 빔 안테나에 관한 것이다. 제안하는 안테나 구조는 크게 여기 소자와 다층 원형 도체 배열 구조로 구성된다. 광대역에 걸쳐 전자파 전력이 다층 원형 도체 배열로 방사하기 위한 여기 소자로 스택 마이크로스트립 패치 소자가 사용되었으며, 고이득 빔 성형을 위한 지향 소자의 역할을 담당하는 다층 원형 도체 배열 소자들은 여기 소자 위에 주기적으로 유한하게 적층되었다. 제안하는 안테나가 고이득 특성을 얻기 위해서는 여기 소자와 다층 원형 도체 배열 소자들 간의 효율적인 전력 결합이 이루어져야 하며, 이를 위해 주어진 설계 규격에 따라 여기 소자 및 다층 원형 도체 배열 소자들의 설계 변수들은 함께 최적화되어야 한다. 본 연구에서는 고이득 성형 빔 안테나는 $9.6{\sim}10.4\;GHz$ 주파수 대역 및 선형 편파 조건하에서 최적화 설계되었으며, 또한 안테나의 다층 원형 도체 배열 소자들을 구현하는 2가지 방법 즉, 얇은 유전체 필름을 이용하는 방법과 유전체 폼을 이용하는 방법들도 제안되었다. 특히, 유전체 필름을 이용하는 안테나에 대해서는 컴퓨터 시뮬레이션 과정을 통해, 원형 도체 배열 소자들의 적층 수에 따른 안테나의 전기적인 성능 변화들을 보여주었다. 유전체 필름(Type 1)과 유전체 폼(Type 2)을 이용한 2종류의 안테나 시제품들을 제작하였으며, 얇은 유전체 필름을 이용한 안테나 시제품에 대해선 시뮬레이션 된 전기적 성능 결과와 비교를 위해 원형 도체 배열 적층 수에 따른 안테나의 전기적인 성능 변화들을 실험하였다. 측정된 이득 성능은 시뮬레이션 이득 성능과 거의 유사한 결과를 보여주었으며, 원형 도체 적층 수에 따라 안테나 이득 변화는 주기성을 보였다. 10 GHz 중심 주파수에서 측정된 Type 1 안테나의 전기적 성능은 원형 도체 배열을 10개 적층(disk10)하였을 때, 15.65 dBi의 최대 안테나 이득과 11.4 dB 이상의 입력 반사 손실 성능을 보여 주었으며, 다층 원형 도체 배열 구조에 의해 약 5 dB의 이득 향상 효과를 얻을 수 있었다. 또한, 원형 도체를 12개 적층하였을 때, 외곽 유전체 링 효과에 의해 Type 1 안테나는 Type 2 안테나보다 상대적으로 약 1.35 dB 만큼 이득이 더 높았으며, 각 안테나의 3 dB 빔 폭은 각각 약 $28^{\circ}$$36^{\circ}$로 측정되었다.

Fan-Beam Microstrip Array Antenna for X-B and Radar

  • Park, Jung-Ryul;Kim, Gue-Chol
    • Journal of information and communication convergence engineering
    • /
    • 제9권5호
    • /
    • pp.483-486
    • /
    • 2011
  • In this study, a fan-beam microstrip array antenna for an X-band radar was designed and fabricated using a novel technique. A microstrip array structure was used to obtain a high-gain and narrow horizontal beam-width. The feeding point is located at the center of the antenna because of its $360^{\circ}$ rotational characteristic. The measured results indicate a gain of 23dBi, and a horizontal and vertical beamwidth of $3.57^{\circ}$, $26.12^{\circ}$, respectively. The proposed antenna performed adequately and managed to meet the specifications.

High performance metal-only fan-beam reflectarray with a delta source applicable for an electromagnetic fence

  • Cho, Yong-Heui
    • International Journal of Contents
    • /
    • 제7권4호
    • /
    • pp.44-49
    • /
    • 2011
  • The scattering solutions for multiple rectangular metallic gratings in a perfectly conducting plane excited by the TE and TM delta sources are presented using an overlapping T-block method. A reflectarray composed of rectangular metallic gratings shows fanbeam radiation patterns that are useful for an electromagnetic fence. The scattering characteristics of multiple rectangular gratings were computed in terms of total radiated power and antenna directivity. The design method of a fan-beam reflectarray to obtain high directivity was also compared with superdirective radiation and parabolic reflector phase.

$BaTiO_3$의 특성을 이용한 광굴절 결합 변환 상관기의 신호 대 잡음비 개선 (Improvement of the Signal-to-Noise Ratio of Photorefractive Joint Transform Correlator using Characteristics of $BaTiO_3$)

  • 공명술;서동환;신창목;조규보;김철수;김수중
    • 대한전자공학회논문지SD
    • /
    • 제40권3호
    • /
    • pp.19-32
    • /
    • 2003
  • 전통적인 광굴절 결합 변환 상관기는 원하는 상관 출력을 얻기 위해 입력되는 신호 대 펌프빔의 세기비가 2광파 혼합의 전달함수가 포화될 정도로 충분히 커야 한다. 그 결과 입력영상에 잡음이 있을 경우 상환 출력의 신호 대 잡류비가 떨어진다. 본 논문에서는 BaTiO₃의 특성을 이용하여 광굴절 결합 변환 상관기의 신호대 잡음비 개선 방법을 제안하였다. 입력빔의 세기비를 작게 하여 에너지 전달이 포화되지 않도록 하고, 신호빔과 매질의 표면이 이루는 각도를 크게 하여 매질내에서의 두 빔의 유효 상호작용 길이가 짧아지도록 하였다. 그 결과 고주파 영역의 이득은 줄어드는 반면 저주파 영역은 2광파 혼합의 포화이득을 가지게 되어 입력영상에 잡음이 있는 경우 신호 대 잡음비가 개선되었고, 입력빔의 세기비가 작아져 실제 구현이 용이해졌다.

Design of a Wideband Antipodal Vivaldi Antenna with an Asymmetric Parasitic Patch

  • Bang, Jihoon;Lee, Juneseok;Choi, Jaehoon
    • Journal of electromagnetic engineering and science
    • /
    • 제18권1호
    • /
    • pp.29-34
    • /
    • 2018
  • An antipodal Vivaldi antenna with a compact parasitic patch to overcome radiation performance degradations in the high-frequency band is proposed. For this purpose, a double asymmetric trapezoidal parasitic patch is designed and added to the aperture of an antipodal Vivaldi antenna. The patch is designed to efficiently focus the beam toward the end-fire direction at high frequencies by utilizing field coupling between the main radiating patch and the inserted parasitic patch. As a result, this technique considerably improves the gain and stability of radiation patterns at high frequencies. The proposed antenna has a peak gain greater than 9 dBi over the frequency range of 6-26.5 GHz.

고속 통신용 DFB 레이저의 빔 분포 해석 (Beam Profile Analysis of DFB Laser for High Speed Communications)

  • 권기영
    • 문화기술의 융합
    • /
    • 제6권3호
    • /
    • pp.419-425
    • /
    • 2020
  • 본 연구에서는 무반사 코팅을 하지 않은, 두 개의 거울 면을 갖는 1.55um 파장용 DFB(Distributed Feedback) 레이저에서 굴절률 격자와 이득 격자가 동시에 존재할 때, 해석 프로그램을 개발하여 종 방향으로 발진 모드의 빔 분포를 해석하였다. 굴절률 격자와 이득 격자가 거울 면에서 갖는 위상 값의 변화에 따라서, δL<0인 경우에 대하여, DFB 레이저의 발진 모드에 대한 발진 이득, 빔 분포 |R(z)|와 |S(z)|, 그리고 방사전력비 Pl/Pr를 비교 분석하였다. 거울 면에서의 격자 위상 값에 관계없이 발진 모드의 문턱 전류를 낮추고 주파수 안정성을 높이기 위해서는, κL이 8보다 커야한다.

Beam Tracking Method Using Unscented Kalman Filter for UAV-Enabled NR MIMO-OFDM System with Hybrid Beamforming

  • Yuna, Sim;Seungseok, Sin;Jihun, Cho;Sangmi, Moon;Young-Hwan, You;Cheol Hong, Kim;Intae, Hwang
    • KSII Transactions on Internet and Information Systems (TIIS)
    • /
    • 제17권1호
    • /
    • pp.280-294
    • /
    • 2023
  • Unmanned aerial vehicles (UAVs) and millimeter-wave frequencies play key roles in supporting 5G wireless communication systems. They expand the field of wireless communication by increasing the data capacities of communication systems and supporting high data rates. However, short wavelengths, owing to the high millimeter-wave frequencies can cause problems, such as signal attenuation and path loss. To address these limitations, research on high directional beamforming technologies continue to garner interest. Furthermore, owing to the mobility of the UAVs, it is essential to track the beam angle accurately to obtain full beamforming gain. This study presents a beam tracking method based on the unscented Kalman filter using hybrid beamforming. The simulation results reveal that the proposed beam tracking scheme improves the overall performance in terms of the mean-squared error and spectral efficiency. In addition, by expanding analog beamforming to hybrid beamforming, the proposed algorithm can be used even in multi-user and multi-stream environments to increase data capacity, thereby increasing utilization in new-radio multiple-input multiple-output orthogonal frequency-division multiplexing systems.