• 제목/요약/키워드: High-Efficiency Appliances

검색결과 69건 처리시간 0.021초

운전조건에 따른 전열교환기의 성능특성 연구 (A Study on the Characteristics of Total Heat Exchanger under Various Conditions)

  • 배철호;임영헌;드래바굴노라;박지열;곽경민;주의성;김영생;김지용
    • 설비공학논문집
    • /
    • 제17권10호
    • /
    • pp.891-897
    • /
    • 2005
  • The characteristics of energy Performance for total heat exchanger have been investigated under various conditions. In cooling operation the latent and enthalpy efficiency are affected by the difference of absolute humidity ratio between indoor and outdoor air. In addition to this the characteristics of absorbing material in the element affects the energy performance. Low dry bulb temperature of indoor air or high absolute humidity ratio in outdoor air give high latent and enthalpy efficiency even with the same temperature difference of dry bulb temperate between indoor and outdoor air.

A Novel Auxiliary Edge-Resonant Snubber-Assisted Soft Switching PWM High Frequency Inverter with Series Capacitor Compensated Resonant Load for Consumer Induction Heating

  • Ahmed Nabil A.;Iwai Toshiaki;Omori Hideki;Lee Hyun-Woo;Nakaoka Mutsuo
    • Journal of Power Electronics
    • /
    • 제6권2호
    • /
    • pp.95-103
    • /
    • 2006
  • In this paper, a novel prototype of auxiliary switched capacitor assisted voltage source soft switching PWM Single-Ended Push Pull (SEPP) series capacitor compensated load resonant inverter with two auxiliary edge resonant lossless inductor snubbers is proposed and discussed for small scale consumer high-frequency induction heating (IH) appliances. The operation principle of this inverter is described by using switching mode equivalent circuits. The newly developed multi resonant high-frequency inverter using trench gate IGBTs can regulate its output AC power via constant frequency edge-resonant associated soft switching commutation by using an asymmetrical PWM control or duty cycle control scheme. The brand-new consumer IH products which use the newly proposed edge-resonant soft switching PWM-SEPP type series load resonant high-frequency inverters are evaluated using power regulation characteristics, actual efficiency vs. duty cycle and input power vs. actual efficiency characteristics. Their operating performance compared with some conventional soft switching high-frequency inverters for IH appliances is discussed on the basis of simulation and experimental results. The practical effectiveness of the newly proposed soft switching PWM SEPP series load resonant inverter is verified from an application point of view as being suitable for consumer high-frequency IH appliances.

가정용 전자기기의 잠재 상쇄 공급량 추정 (Estimation of Potential Supply of Offset from Household Electric Appliances)

  • 진현정;김정인;유은영;박서화
    • 자원ㆍ환경경제연구
    • /
    • 제24권3호
    • /
    • pp.463-488
    • /
    • 2015
  • 본 연구에서는 2015년부터 시행된 온실가스 배출권 거래제도에 맞추어 상쇄(offset)제도의 구체적인 설계가 필요한 시점에서, 가정부문의 고효율 전자기기의 보급을 통해 확보할 수 있는 잠재 상쇄 공급량을 추정하였다. 분석대상 품목은 TV, 세탁기, 선풍기, 냉장고, 에어컨 등 다섯 가지 가전기기이며, 자기회귀시차분포모형(ARDL)을 통해 2016년부터 2022년까지의 고효율 가전기기의 보급대수를 추정하고, 효율 개선을 통한 전기 절감량과 이에 따른 탄소 환산율을 통해 최종적으로 잠재 상쇄 공급량을 도출하였다. 고효율 가전기기의 에너지 절감률을 각각 10%와 20%로 가정했을 때 2022년에 누적된 탄소 저감량은 $361,899CO_2t$$723,797CO_2t$으로 나타났으며, 에너지 절감량이 큰 순서로는 에어컨, 냉장고, TV, 세탁기, 선풍기 순으로 나타났다. 또한 에너지 소비효율 1등급 가전기기의 에너지 절감률이 20%라고 가정했을 때, 누적 탄소 저감량이 2015년에 비해 2022년에 약 316% 증가하는 것으로 나타났다.

고효율기기의 보급확산을 고려한 전력수요관리 모니터링시스템의 방법론 개발 (Development of DSM(Demand Side Management) Monitoring Methodology Considering the Diffusion Process of High Efficient End-Use Appliances)

  • 황성욱;김발호;김정훈;장승찬;김창섭
    • 대한전기학회논문지:전력기술부문A
    • /
    • 제48권8호
    • /
    • pp.941-950
    • /
    • 1999
  • This paper presents a DSM monitoring methodology that is able to evaluate the impact of DSM programs especially focused on the strategic conservation i.e. the enhancement of end-use energy efficiency. For an effective assessment of DSM programs, it is foremost necessary to examine the market characteristics on the specific end-use appliance according to the customer's adoption of DSM programs. The proposed monitoring methodology contains a diffusion process of high efficient end-uses considering major factors of DSM impact such as, price, reference capacity, forecasted capacity and lifetime of end-use appliances. Case studies show the projection of power reductions and energy savings resulted from DSM monitoring in order to diagnose the current status properly and provide a baseline of DSM policy and analysis.

  • PDF

Advanced Induction Heating Equipment using Dual Mode PWM-PDM Controlled Series Load Resonant Tank High Frequency Inverters

  • Fathy, Khairy;Kwon, Soon-Kurl;Nakaoka, Mutsuo
    • Journal of Power Electronics
    • /
    • 제7권3호
    • /
    • pp.246-256
    • /
    • 2007
  • In this paper, a novel type auxiliary active edge resonant snubber assisted zero current soft switching pulse modulation Single-Ended Push Pull (SEPP) series load resonant inverter using IGBT power modules is proposed for cost effective consumer high-frequency induction heating (IH) appliances. Its operating principle in steady state is described by using each switching mode's equivalent operating circuits. The new multi resonant high-frequency inverter with series load resonance and edge resonance can regulate its high frequency output power under a condition of a constant frequency zero current soft switching (ZCS) commutation principle on the basis of the asymmetrical pulse width modulation (PWM) control scheme. Brand-new consumer IH products using the proposed ZCS-PWM series load resonant SEPP high-frequency inverter using IGBTs is evaluated and discussed as compared with conventional high-frequency inverters on the basis of experimental results. In order to extend ZCS operation ranges under a low power setting PWM as well as to improve efficiency, the high frequency pulse density modulation (PDM) strategy is demonstrated for high frequency multi-resonant inverters. Its practical effectiveness is substantially proved from an application point of view.

최적화 기법을 이용한 에너지 효율 프로그램의 지원금 수준 산정 (Estimation of Rebate Level for Energy Efficiency Programs Using Optimization Technique)

  • 박종진;소철호;김진오
    • 전기학회논문지
    • /
    • 제57권3호
    • /
    • pp.369-374
    • /
    • 2008
  • This paper presents the evaluation procedures and the estimation method for the estimation of optimal rebate level for EE(Energy Efficiency) programs. The penetration amount of each appliance is estimated by applying price function to preferred diffusion model resulted from model compatibility test. To estimate the optimal rebate level, two objective functions which express the maximum energy saving and operation benefit are introduced and by multi-objective function which can simultaneously consider two objective functions the optimal rebate level of each appliance is estimated. And then, using the decided rebate level and each penetration amount, the priority order for reasonable investment of each high-efficiency appliance is estimated compared to the results of conventional method. Finally, using a benefit/cost analysis based on California standard practice manual, the economic analysis is implemented for the four perspectives such as participant, ratepayer impact measure, program administrator cost and total resource cost.

공조용 로터리 압축기 소음저감을 위한 어큐뮬레이터 최적설계 (Design Optimization of an Accumulator for Noise Reduction of Rotary Compressor)

  • 이의윤;김봉준;이정배;성춘모;이운섭;이종수
    • 대한기계학회논문집A
    • /
    • 제35권7호
    • /
    • pp.759-766
    • /
    • 2011
  • 최근 가정용 에어컨은 냉방효율뿐 아니라 소음에 대한 중요성이 지속적으로 높아지고 있다. 로터리 압축기는 에어컨의 소음 중 매우 높은 영향도를 가지고 있으며, 압축기의 소음을 줄이기 위해 머플러 및 공명기에 관한 많은 연구들이 진행되어 왔다. 압축기의 부품 중 어큐뮬레이터는 큰 용적으로 인해 공명에 의한 추가 소음을 에어컨에 전달하는 소음 전달경로가 되며, 어큐뮬레이터의 내부구조는 소음저감을 위해 중요한 설계요소가 되나 지금까지는 연구결과가 미비한 수준이었다. 본 논문에서는 어큐뮬레이터의 소음 저감을 위해 목표주파수 대역에서의 투과손실이 최대가 되는 설계최적화를 수행하였다. 높은 비선형성을 가진 문제의 최적화를 위해 실험계획법과 반경기저신경망기법을 이용한 근사 모델을 사용하였으며, 유전알고리즘을 사용한 최적화를 수행하였다.

영구 자석 매립형 BLDC Motor의 Sensorless 제어기 설계 (Design of Sensorless Controller for Interior Permanent-Magnet BLDC Motor)

  • 김학원;안준호;양순배;조관열;김정철
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1997년도 전력전자학술대회 논문집
    • /
    • pp.79-83
    • /
    • 1997
  • The inverter fed BLDC(Brushless DC) motor has been increasingly applied to industry and home appliances due to the advance of power electronics and permanent magnet technology, and its high efficiency and good acoustic noise characteristics. The BLDC motor and drives, however, require the rotor position sensors that may cause some problems such as the high cost and space. In this paper, sensorless algorithm for an interior permanent magnet BLDC motor is proposed. The maximum torque per ampere operation with advance angle considering load torque and speed was simulated and verified through the experiment.

  • PDF

Residential Solar Cell System by driving of High Efficiency Inverter

  • Kwak Dong-Kurl;Lee Hyun-Woo
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
    • /
    • pp.687-691
    • /
    • 2001
  • With today's global environmental and energy problems, high expectations exist for solar power generation to reduce carbon dioxide generated by the consumption of fossil fuels. On the other hand, power consumption in residential homes is increasing every year. Among the many household appliances, the power demand for air conditioners increases dramatically during the summer, particularly in the afternoons. As this pattern closely matches the output pattern of solar cells, it should be possible to combine a photovoltaic array with an air conditioner to decrease the energy consumption within the home. We have developed a residential solar-powered air conditioner that operates through a combination of photovoltaic array and commercial power. In this paper, the configuration and specification of the residential solar-powered system are described to a novel high efficiency inverter using a ZVCS boost converter. And the performance evaluations of the solar-powered air conditioner are examined by the analysis of a new tracking controller with a maximum power $P_{max}$ detection of solar cell.

  • PDF

확산 모형을 이용한 고효율기기의 보급량 예측에 관한 연구 (A Study on Forecast of Penetration Amount of High-Efficiency Appliance Using Diffusion Models)

  • 박종진;소철호;김진오
    • 에너지공학
    • /
    • 제17권1호
    • /
    • pp.31-37
    • /
    • 2008
  • 현재 에너지 효율프로그램에 대한 수요관리 목표량과 투자비는 과거 실적 데이터를 바탕으로 단일한 Bass 확산 모형을 이용하여 산정되고 있다. 국내외적으로 제품 등의 보급량 예측에 널리 사용되는 Bass 확산 모형은 시간과 세 가지 계수들에 대한 함수로 표현되며, 계수들의 추정에 있어서 제품의 과거 실적 데이터의 충분한 확보가 필수적이다. 국내의 경우 에너지 효율 측면에서 고효율기기의 수요관리 목표량 산정을 위해 기기별 보급량 예측이 선행되어야 하며, 기기별 보급량 예측은 Bass 모형을 근간으로 하고 있다. 그러나 현재 진행 중인 고효율기기 보급 프로그램의 조명기기, 인버터, 자판기와 전동기는 그 진행이 길지 않아 Bass 확산 모형을 이용한 보급량 예측에 필수요건인 충분한 실적 데이터가 존재하지 않은 실정이다. 이는 기기의 미래 보급량 예측에 큰 오차가 발생할 수 있으며 보급 예측량에 대한 정확성을 기대하기 어려우므로 앞으로의 고효율기기의 보급 예측의 방식에 제도적 개선이 필요한 상황이라 할 수 있다. 본 논문에서는 Bass, virtual Bass, Logistic과 Lawrence & Lawton 확산 모형을 이용하여 각 고효율 기기의 미래 보급 확산 추이를 살펴보았다. 또한 기기별 특성에 따른 모형 선호도 평가를 위해 통계랑 기준에 근거하여 실적 데이터와의 오차 범위를 산정하였다. 이 결과를 바탕으로 각 확산 모형을 이용한 기기 보급량 예측에 있어서 확산 모형의 단순 적용에 따른 오차 발생 원인과 기기별 특성에 따른 확산 모형 선호도를 분석하였다.