• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1367-1372
• /
• 2008

A plate type supporting structure of a tube bundle in axial flow generates a certain band of a high frequency periodic excitation of a vortex shedding and/or a flow separation due to sharp edge of the plate thickness and a severe pressure drop due to a cross-sectional area of the supports. With a design consideration of the low vibration and a small flow resistance, the analysis method is uniquely confined to an experimental approach because a complex geometry of a cylindrical tube bundle and/or physical phenomena related to the fluid-structure interaction of tube bundle in a flow impede a theoretical or a numerical approach. A 5x5 cylindrical tube bundle with 5 supports which were discretely located along the bundle's axis was tested in the FIVPET hydraulic test loop for a design evaluation and an analysis perspectives. A high frequency flow-induced vibration of the supporting structures of the cylindrical tube bundle was measured at a outer surface of a supporting structure through a transparent flow housing by the laser dopper vibrometer. Pressure drop in-between three measurement distances was measured by the differential pressure transmitter. High frequency vibration and pressure drop fairly depends on the geometric design of supporting structure. So, these two parameters would be used as a qualitative design variables for design evaluation and analysis.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.2
• /
• pp.93-101
• /
• 2014

In general, particle simulation methods such as the MPS(Moving Particle Simulation) or SPH(Smoothed Particle Hydrodynamics) methods have some serious drawbacks for pressure solutions. The pressure field shows spurious high fluctuations both temporally and spatially. It is well known that pressure fluctuation primarily occurs because of the numerical approximation of the partial differential operators. The MPS and SPH methods employ a pre-defined kernel function in the approximation of the gradient and Laplacian operators. Because this kernel function is constructed artificially, an accurate solution cannot be guaranteed, especially when the distribution of particles is irregular. In this paper, we propose a particle simulation method based on the moving least-square technique for solving the partial differential operators using a Taylor-series expansion. The developed method was applied to the hydro-static pressure and dam-broken problems to validate it.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.637-642
• /
• 2017

In this study, cold flow and combustion tests are conducted and analyzed to validate designed rocket engine head generating high temperature/pressure steam. At first, uni-injector was designed and manufactured, and cold flow test was conducted. Through this, differential pressure that can supply designed flow rate was confirmed. Also, Each injector's spray pattern were confirmed by patternator. Based on cold flow test results, we selected injectors among the candidates and arranged them on engine head, and cold flow and propellant spray tests were conducted. Finally, combustion test was carried out to analyze the flow rate, pressure, combustion efficiency. As a result, validation of rocket engine head for the development of the high temperature and high pressure steam generator has been completed.

• Journal of the Korean Society of Combustion
• /
• v.22 no.2
• /
• pp.36-41
• /
• 2017

Aero gas turbine engines must demonstrate their ability to be ignited on ground conditions or relighted in flight. The electric spark ignition is usually used in current aero gas turbine engines. Experiments on ignition characteristics relating to spark igniter penetration depth under atmospheric pressure and temperature conditions were conducted on the model combustor which is scaled in 1/18. Exciter was operated during 2 seconds, and successful ignition phenomena were confirmed by the pressure rising sharply in combustor. In addition, instantaneous ignition images were captured by a high-speed camera. It showed kernel propagation and successful ignition events in the sector model combustor. Ignition test results showed that ignition limit with increase in penetration depth of the igniter plug was wider. When the penetration depth of the igniter plug increased under the same fuel injection pressure condition, successful ignition events were obtained in higher differential pressure conditions between inlet and outlet of the combustor. The results demonstrate that the ratio of the combustible mixture, which is exposed to the high temperature environment around the igniter plug tip, increases. Thereby affect the combustor ignition performance.

• Archives of Plastic Surgery
• /
• v.32 no.4
• /
• pp.543-546
• /
• 2005

Pulmonary embolism is a one of the major cause of postoperative death. Surgery predisposes patients to pulmonary embolism, even as late as one month after the operation. The accurate detection of pulmonary embolism remains difficult, and the differential diagnosis is extensive. The prevention of pulmonary embolism is thus of paramount importance. We report a case of pulmonary embolism after coverage of pressure sore on the left ischium on the 8th day after operation. The patient was 60 years old, a severe smoker, in the high quantity of body mass index and had hypertension. The risk factors are 60 years of age or older who were in the highest quantity of body mass index. Heavy cigarette smoking and high blood pressure are also identified as risk factors. Plastic surgeons should keep the probability of pulmonary embolism development after operation in mind. When taking history, the risk factors should be checked certainly. The immobilization may explain the probability of pulmonary embolism development. Therefore absolute bed rest or positional maintenance should be avoided. Until recently, low molecular weight heparin has been used for preoperative prophylaxis. Plastic surgeons should be concerned in low molecular weight heparin for prophylaxis of the pulmonary embolism and study the indications and effectiveness in liposuction or abdominoplasty.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.8
• /
• pp.19-24
• /
• 2022

We developed a prototype from the design of a trim, which is the most important in the localization development of a 1500 Ib high-differential pressure-control valve used for boiler feedwater, and measured the flow coefficient, the most basic design data for valves. The following conclusions were drawn. The comparison of the design values of the flow coefficients for the existing X-trim and the multicore trim designed for localization development showed that they were almost identical, and the X-trim value was slightly lower. The comparison of the X-trim and multicore trim based on the valve flow coefficient test showed that they were generally similar, indicating no problem with the design. In the future, we plan to compare and analyze the flow paths for the X-trim and multicore trim via flow analysis.

• The Korean Journal of Food And Nutrition
• /
• v.24 no.4
• /
• pp.602-606
• /
• 2011

찹쌀전분의 고압처리시 pH 3~10 조건에서 고유점도는 1.328~1.426 ml/g 범위로 원료전분(1.15 ml/g)보다 낮았다. 특히, 고유점도는 산성 및 알칼리성 조건에서 감소하였다. 전분의 호화과정 중 열에너지량을 나타내는 호화엔탈피는 pH 3, 4 및 5 조건에서 고압처리한 찹쌀전분이 각각 13.86, 13.47 및 13.42 J/g으로 원료전분(16.3 J/g)보다 낮은 값을 보였다. 찹쌀전분의 호화온도 및 엔탈피 감소는 고유점도가 낮아지는 현상과 일치하였다.

• YAKHAK HOEJI
• /
• v.24 no.2
• /
• pp.117-122
• /
• 1980

A new application of high pressure liquid chromatography for the determination of fenitrothion and cis- and trans-neopynamin in insecticidal preparations was investigated. Optimum conditions for a good separation and determination were determined; solvent system: dichloromethane + n-hexane = 17 + 83; Bow rate: 0.5ml/min; column: u-porasil ($4mm{\times}3Ocm$); absorbance wavelength: 254nm; 0.05 AUFS and sample size: 30 ul. Recovery of fenicrothion, cis- and trans-neopynamin from mixed artificial preparations was 99.6%, 99.7% and 99.8% respectively. Also reproducibility tests showed that the coefficient of variation was 0.89% for fenitrothion, 0.74% cis-neopynamin and 1.1% for trans-neopynamin. There was no interference with insecticidal preparation containing DDVP, allethrin, S-421 and kerosene. HPLC method was rapid, accurate and it gave better reproducibility and higher sensitivity than any other analytical method. It was considered that HPLC could be greatly applied to the analysis of fenitrothion and neopynamin in insecticidal preparations.

• International Journal of High-Rise Buildings
• /
• v.12 no.2
• /
• pp.129-136
• /
• 2023

Natural ventilation has proven to be an effective passive strategy in improving energy efficiency and providing healthy environments. However, such a strategy has not been commonly adopted to tall office buildings that traditionally rely on single-skin façades (SSFs), due to the high wind pressure that creates excessive air velocities and occupant discomfort at upper floors. Double-skin façades (DSFs) can provide an opportunity to facilitate natural ventilation in tall office buildings, as the fundamental components such as the additional skin and openings create a buffer to regulate the direct impact of wind pressure and the airflow around the buildings. This study investigates the impact of modified multi-story type DSFs on indoor airflow in a 60-story, 780-foot (238 m) naturally ventilated tall office building under isothermal conditions. Thus, the performance of wind effect related components was assessed based on the criteria (e.g., air velocity and airflow distribution), particularly with respect to opening size. Computational fluid dynamics (CFD) was utilized to simulate outdoor airflow around the tall office building, and indoor airflow at multiple heights in case of various DSF opening configurations. The simulation results indicate that the outer skin opening is the more influential parameter than the inner skin opening on the indoor airflow behavior. On the other hand, the variations of inner skin opening size help improve the indoor airflow with respect to the desired air velocity and airflow distribution. Despite some vortexes observed in the indoor spaces, cross ventilation can occur as positive pressure on the windward side and negative pressure on the other sides generate productive pressure differential. The results also demonstrate that DSFs with smaller openings suitably reduce not only the impact of wind pressure, but also the concentration of high air velocity near the windows on the windward side, compared to SSFs. Further insight on indoor airflow behaviors depending on DSF opening configurations leads to a better understanding of the DSF design strategies for effective natural ventilation in tall office buildings.

• Journal of the Korean Geosynthetics Society
• /
• v.22 no.1
• /
• pp.87-96
• /
• 2023

There are a lot of difference between the surface settlement and the differential settlement measured at the Busan New Port, where the dredged and reclaimed clay layer exists and below the clay is originally thickly distributed. To find the cause and solution of this, the actual conditions of each differential settlement used for the soft ground improvement, characteristics, installation method, measurement frequency, measurement data management, and data analysis of each type were considered. In the deep soft ground improvement work where large deformation occurs, the bending deformation of the screw-type differential settlement gauge is less than that of other types of measuring instruments, so there is less risk of loss, and the reliability of data is relatively high as the instruments are installed by drilling for each stratum. Since the greater the amount of high-precision settlement measurement data, the higher the settlement analysis precision. It is necessary to manage with higher criteria than the measurement frequency suggested in the standard specification. For the data management of the differential settlement gauge, it is desirable to create graphs of the settlement and embankment height of the relevant section over time, such as surface, differential, and settlement of pore water pressure gauge for each point. In the case of multi-layered ground with different compression characteristics, it is more appropriate to perform settlement analysis by calculating the consolidation characteristics of each stratum using a differential settlement data.