• Asian-Australasian Journal of Animal Sciences
• /
• 제23권4호
• /
• pp.437-443
• /
• 2010

To be economically profitable, the poultry industry demands an increase in stocking density, which could adversely affect chicken welfare. The current study was performed to investigate the effect of stocking density on stress-related, heat shock protein genes (HSP70 and HSP90), 3-hydroxyl-3-methyl-glutaryl coenzyme A reductase (HMGCR) gene and telomere length in broiler chickens. Seven-day-old broiler chickens were housed at High (0.0578 $m^2$/bird), Standard (0.077 $m^2$/bird) and Low (0.116 $m^2$/bird) stocking densities with 8 replicates each until 35 d of age. The growth performance, such as body weight gain and average daily feed intake, was found to be significantly (p<0.05) higher in the Low density group, but these parameters did not show any difference between the High and Standard groups. Other growth performance, such as feed conversion ratio and final feed intake, showed no difference among the treated groups. The expression levels of HSP70 and HMGCR were found to be elevated with the increase of stocking density. The expression level of these genes was significantly (p<0.05) higher in the High density stocked group compared with the other groups, whereas the expression levels were not significantly different between the Low and Standard groups. The expression levels of HSP90 did not show any significant changes among the treated groups. The telomeric length of the birds housed in High density was reduced significantly (p<0.05) when compared to that of the birds in Low density. These results clearly indicate that birds stocked at high density show physiological adaptive changes indicative of stress at gene transcriptional and telomere levels.

• 한국표면공학회지
• /
• 제28권2호
• /
• pp.92-100
• /
• 1995

To increase the capacity of positive electrode materials for matching the high capacity negative electrode materials in alkaline rechargeable batteries, high-density nickel hydroxide powders were made through a continuous process from nickel sulfate reacted with ammonia and sodium hydroxidc. The effect of operating conditions on structure, shape, size distribution, apparent density and tap density of powders were investigated. Crystal structure of nickel hydroxide powder was hcp according to Bravais Lattice. The increase of mean residence time promoted the growth of (101) plane. The shape of powder was nearly spherical. Their size was in the range of $2~50\mu\textrm{m}$. The size distribution of the powders prepared was narrower than that of commercially obtained nickel hydroxide. Apparent density and tap density were 1.6~1.7g/cc and 2.0~2.1g/cc, respectively.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.305-310
• /
• 2001

Within some degree of journal misalignment, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined under the condition of variable density and specific heat. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the effects of variable density and specific heat on shaft misalignment are significant in determining the load capacity of a journal bearing operating at high speed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.287-292
• /
• 2001

Under the condition of variable density and specific heat, maximum pressure, maximum temperature, bearing load, friction and side leakage in high-speed journal bearing operation are examined. The results are compared with the calculation results under the conditions of constant density and specific heat, and variable density and constant specific heat. It is found that the condition of variable density and specific heat play important roles in determining friction and load of journal bearing at high speed operation.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권9호
• /
• pp.468-474
• /
• 2003

This paper describes the development of an open frame type high power density switching converter. It is based on the active clamp forward converter with synchronous rectifier, and packaged by using the open frame and multi-layer printed circuit board (PCB) technology to achieve the higher power density. Furthermore, the windings of transformer and inductor are also realized by multi-layer PCB so that it also contributes to achieve higher power density. Through the experiment on the prototype converter of 50[W], it is confirmed that power density of 50[W/i$n_3$] and maximum efficiency of over 91[%] are obtained.

• 한국분무공학회지
• /
• 제8권2호
• /
• pp.7-15
• /
• 2003

The effects of fuel density and fuel viscosity on spray characteristics were investigated under two different gas turbine fuels and various fuel supply pressure conditions through measurement of SMD, number density and volume flux by using PDPA system in dual orifice injector for gas turbine engines. In this study, we found out that the droplet size and spray structure are strongly depend on fuel density for dual orifice injector. The spray characteristics of high density fuel in dual orifice injector are similar with the characteristics of low density fuel in single orifice injector. The shear region between primary main fuel stream and secondary main fuel stream is examined in low density fuel condition but not exist in high density fuel condition, then this shear region is very important in quality of gas turbine spray. There are worth consideration for the effect of fuel density on spray characteristics in frontal device design to improve combustion efficiency.

• 대한방사선기술학회지:방사선기술과학
• /
• 제30권4호
• /
• pp.365-371
• /
• 2007

최근 연구들은 골다공증과 동맥경화증의 병인 간의 연관성을 제시한다. 이 연구에서는 건강한 중년 여성에서 high-sensitivity C-reactive protein(hs-CRP), 지질 농도 등을 포함한 심혈관 위험인자들과 요추 골밀도의 상관관계를 분석하였다. 총 300명의 성인여성을 대상으로 하여 신체계측을 시행하였고, 공복혈당, 지질, hs-CRP를 포함한 심혈관질환 위험인자들을 측정하였다. 동맥경화지수는 총콜레스테롤 농도를 고밀도지단백 콜레스테롤 농도로 나누어서 계산하였다. Dual X-ray abosorptiometry를 이용하여 요추 골밀도를 측정하였다. 연구결과 연령, 수축기 및 이완기 혈압, 총 콜레스테롤, 고밀도지단백 콜레스테롤은 요추 골밀도와 음의 상관관계를 보였다. 통계적으로는 연령과 체질량지수, 고밀도지단백 콜레스테롤이 요추 골밀도와 의미 있는 상관관계를 보였다. 요추 골밀도에 영향을 미치는 심혈관 인자들은 연령과 고밀도지단백 콜레스테롤이 요추 골밀도($R^2=0.272$)의 독립적 위험인자로 나타났다.

• Bulletin of the Korean Chemical Society
• /
• 제30권5호
• /
• pp.1177-1180
• /
• 2009

• 한국환경생태학회지
• /
• 제28권5호
• /
• pp.516-522
• /
• 2014

본 연구에서는 두루미류의 서식밀도에 영향을 주는 요인 중 인위적 요인에 의한 영향을 평가하고자 하였다. 대상지역은 강원도 철원군의 민간인통제지역이며 2009년부터 2014년까지 매년 1월의 두루미와 재두루미의 분포를 대상으로 하였다. 인위적 요인인 도로, 거주지 및 군사시설로 부터의 거리에 따른 두루미류의 밀도를 파악하였으며, 비닐하우스의 분포밀도 차이에 따른 두루미류의 서식밀도를 평가하였다. 두루미와 재두루미는 동일지점에서 서식밀도 상관관계가 있었기 때문에 인위적 요인에 대해 유사한 민감성을 보이는 것으로 나타났다. 거주지와 가까운 곳은 두루미와 재두루미 모두 낮은 서식밀도를 보였으며, 2.5km 구간까지 거리가 멀어질수록 밀도가 증가하는 양상을 보였다. 이는 군사시설 및 통행량이 높은 도로와 유사한 양상이었으며, 군사시설로 부터는 약 0.8km까지, 통행량이 높은 도로는 2km 구간까지 요인으로부터 멀어질수록 서식밀도가 증가하였다. 이러한 경향은 인가지역과 군사시설 및 통행량이 높은 도로가 두루미류의 서식밀도에 일정범위까지 악영향을 주는 것을 의미하였다. 통행량이 적은 도로와 인접한 곳은 간헐적 간섭으로 먹이자원이 보전되어 있어 밀도가 높은 것으로 판단되었다. 비닐하우스의 밀도가 낮은 곳에서는 밀도가 증가할수록 두루미류의 서식밀도가 감소하는 경향을 보였는데, 비닐하우스의 밀도가 40개/$km^2$ 미만인 경우에서 나타났다. 하지만 비닐하우스의 밀도가 40개/$km^2$ 이상인 지역에서는 뚜렸한 밀도의 감소가 나타나지 않았다.

• 복식
• /
• 제58권4호
• /
• pp.26-34
• /
• 2008

The purpose of this study was to create a database of information on the mechanical properties of two different waterproof and breathable shell fabric groups(high density woven and PTFE laminate) used for outdoor apparel and to compare and correlate data of their mechanical properties and hand values. The results of this study were as follows; There were no statistically significant differences between two fabric groups in extension, bending and shearing properties. There were statistically significant differences between two fabric groups in MMD, SMD, LC and we values. High density woven fabrics had smoother surface than PTFE laminated fabrics. PTFE laminated fabrics can be compressed easily more than high density woven fabrics but their recovery after compression was not better than high density woven fabrics. There were statistically significant differences between two fabric groups in NUMERI, FUKURAMI. There was statistically significant difference between two fabric groups in total hand value. Total hand value and mean deviation of MIU had a very high and statistically significant negative correlation coefficient.