• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.115-122
• /
• 2020

This study aimed to improve the reliability of the assurance pressure of a gun barrel due to the difference between the US Standard and Korean Standard. In addition, the reliability was found to differ according to the maximum pressure of the Ammunition, so restrictions are expected. During the development of the new bullet, the maximum pressure of the bullet was approximately 3,000 psi higher than the assurance pressure of the gun barrel. To solve this problem, the reliability of the cannon was analyzed when the assurance pressure of the gun barrel increased. First of all, the technical data from overseas were reviewed to check for cases of increased assurance pressure, and tests were performed to determine if it could withstand high pressure through a verification firing test. Finally, the simulation analyzed the stability of the recoil buffer. The study found no abnormal results in all items, suggesting that an increase in the assurance pressure for a gun barrel was possible. This study is expected to be used as basic data for future reliability studies of similar equipment.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.9
• /
• pp.900-906
• /
• 2010

We analyse benefits and costs of investment on the assurance of aircraft design and development of related infrastructure. Although the discounted cash flow from the sales of aircrafts is found to be smaller than the amount of required investment, the net present value considering the effects of export increase, import substitution, and the accident cost reduction is very high. This justifies governmental investment, for the effects are not easily appropriated by private investors.

• Journal of Korean Society of Rural Planning
• /
• v.24 no.1
• /
• pp.89-97
• /
• 2018

Recently, interest in rural tourism for urban dwellers has increased, and rural communities are chosen as tourist destinations. Under these circumstances, the study was designed to analyze the effects of the quality of service at rural stay sites on customer satisfaction and recommendation intention. The analysis method analyzes the demographic characteristics of the survey participants and characteristics of participation in rural stay. And the quality of service for the experience of rural stay was analyzed with SERVQUAL'S five-dimensional type, reliability, assurance, responsiveness, empathy, tangible and customer satisfaction, intent of recommendation and regression. Major analysis shows that the survey subjects were found to have an average age of 41.8 years, 49 to 59 years old, and a high degree of university graduation. And as characteristic of participation, the form of company was family and relatives, the form of family meeting was many summer, the reservation was Internet, and payment by cash and card were many. As a result of the hypothesis testing, reliability, assurance, responsiveness, and empathy among the quality of service of rural stay were affected in customer satisfaction. In addition, the quality of service and the intent to recommend it were statistically significant, reliability, assurance and empathy. Therefore, it is deemed necessary to make efforts to improve service quality as the quality of service at rural stay places has relevance to customer satisfaction and recommendation intention.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.11 no.18
• /
• pp.71-80
• /
• 1988

Process capability implies the qualitative capability of a process, and it is necessary to specify the process capability by quantification and to evaluate the level with the specified standardizaion. But the process capability index is currently used to evaluate the performance of quality control activity. without considering the characteristics of process structure or the economy of management. Here the researcher would like to redefine process capability and emphasize its index may be used as the measure of managerial assessment and the objective of process quality control in full consideration of the economic aspects of process characteristics. Too little or too much process capability causes a loss of or excess. The proper economic level of process capability varies to each process. The procedure of taking the optimum process capability index is derived from the expected profit function, whereas each method is studied in cases of normal process with one-sided specification and two-sided specification. In addition, the process capability index is presented as a method of quality assurance. And an example is exhibited on wrapping process of 'A' company. The results of this study are summarized at follows. First, though the norminalization of the process capability index is possible by the existing methods, the optimum process capability index can vary to the situation of each process. So, the optimum process capability index which is suggested in this dissertation should be used as the standard to assess process capability. Second, the process capability index can take its effect not just in indicating quality control or managerial records but also in the management of high qualify assurance.

• Journal of the military operations research society of Korea
• /
• v.33 no.1
• /
• pp.31-42
• /
• 2007

While Defense Agency fur Technology and Quality(DTaQ) has been utilized a risk assessment method as a quality assurance activity for defense goods since 1999, a risk assessment method is known to be ineffective to identify defective items. The objective of this study is to propose the new evaluation method, that adjusts a relative priority of evaluation elements using AHP(Analytic Hierarchy Process). Newly evaluated scores have been applied to the risk assessment result of 2005 defective items to test a validity of the new evaluation model. The new model is capable to identify more high and medium risk-level items than the current method. The company risk-level gets more scores than the item risk-level in the new model.

• The Journal of Korean Society for Radiation Therapy
• /
• v.10 no.1
• /
• pp.30-44
• /
• 1998

Accurate delivery of doses using a high dose rate(HDR) brachytherapy, remote afterloading system(RALS) depends on knowing the strength of the radioactive source at the time of treatment, the precision and consistency of the timer, and the ability of the unit to position the source at the proper dwell location along the applicator. Periodic Quality Assurance(QA) on HDR machines is a part of the standard protocol of any user. The safety of the patient & staff, positional accuracy, temporal accuracy, and dose delivery accuracy are periodically(weekly, quarterly, monthly) estimated using HDR source(Ir-192), treatment planning devices, measurement devices, and overall treatment devices with regard to treatment delivery. The overall measurement results are estimated successfully and assessed its clinical significance. As a result, our HDR brachytherapy units has been very accurate until now. The QA program protocol permits routine clinical use and provides a high confidence level in the accurate operation of HDR units. Therefore, regular QA of HDR brachytherapy is essential for successful treatment.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.3
• /
• pp.323-332
• /
• 1996

Precipitation samples were collected by the wet-only sampling method at Seoul from September 1993 to June 1995. Sample were analysed for the anions $(NO_3^-, NO_2^-, SO_4^{2-}, Cl^-, and F^-)$ and cations $(Na^+, K^+, Ca^{2+}, Mg^{2+}, and NH_4^+)$ in addition to pH and electric conductivity. In order to establish the chemical analysis data of high quality, the assurance checks for analytical data of precipitation were performed by considering the ion balance and by comparing the measured conductivity with the calculated conductivity. As we applied the various assurance checking methods by the ion balance used until recently to a data set measured in this study, the f value expressed as $\Sigma C/\Sigma A$ was found to be not appropriate for the data screening. Also, the scattering plot between cations and anions in each sample was found to show the general tendency of ion balance but was proved to not quantitate the standard of data screening at a data set of samples of various concentration levels. The h value defined as (A-C)/C for C $\geq$ A and (A-C)/A for C < A was used to check the ion balance. However, the standard of data screening by h value must very in response to total ion concentration of samples. In this study, the quality assurance of chemical analysis data was checked by considering both the ion balance of evaluating by h value and the conductivity balance. Further the quality control was achieved by these quality assurance methods. As the result, 67 samples among total 77 were obtained as valid. As the central tendency value for a statistical summary in the analytical parametr of samples, the volume-weighted mean value was found to represent more the general chemistry of precipitation rather than the arithmetic mean. The volume-weighted mean pH was 5.0 and 25% of samples was less than this mean. The concentrations of sufate and nitrate in precipitation were 90.4 ueq/L and 32.4 ueq/L which made up 59% and 21% of all anions. The raion of $SO_4^{2-}/(NO_3^- + NO_2^-)$ in precipitation was 2.7, which indicates that the contributions of $H_2SO_4$ and $HNO_3$ to the acidity of precipitation are 70% and 30%, respectively.

• The Journal of the Korean dental association
• /
• v.52 no.3
• /
• pp.153-163
• /
• 2014

3-dimensional information for anatomic stucture plays a role as integral part in clinical aspect of dental practice. CBCT(cone beam computed tomography) has been accepted as useful diagnostic tool offering Volume data and images for evaluating teeth and jaws in lower radiation dose than conventional CT. CBCT equipment is essential for the quality assurance of it to ensure continued satisfactory performance and result of adequate images. Dental practitioner and oral and maxillofacial radiologist should have a responsibility and critical thinking to deliver this technology to patients in a responsible way, so that diaganostic value is maximised and radiation doses kept as low as resonably achievable. CBCT imaging modality should be used only after a review of the patient's health and imaging history and the completion of a thorough clinical examination. Clinical guidelines are systematically developed statements to assist practitioner and patient decisions about appropriate health care for specific clinical circumstances Dental practitioners should prescribe CBCT imaging only when they expect that the diagnostic yield will benefit patient care, enhance patient safety or improve clinical outcomes significantly. Knowledge of patient dose is essential for clinicians who are making the decision regarding the justification of the exposure. There are some limitation in the measurement of patient dose in CBCT for the approval and adaptation of conventinal methodolgy in CT. It is also important to ensure that doses are optimised and in line with any national and international guidelines. The higher radiation doses of CBCT compared with conventional radiography, mean that high standards must be maintained. The Quality Assurance(QA) programme should entail surveys and checks that are performed according to a regular timetable. QA programme should be maintained by staff to ensure adherence to the programme and to raise its importance among staff.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.287-299
• /
• 2016

The electronic transactions over the Internet are growing across the world recently. There have been a lot of identity theft incidents during these online transactions nowaday. Therefore, a high level of identity proofing shall be carried out when using online services to deal with these matter. To prevent this kind of incident, i-PIN was introduced in Korea, which is used as an Internet Personal Identification Number. The i-PIN is designated to provide an online identification of the Internet users. As such, the unique identification numbers are provided to the internet service providers. This paper is to analyze the capabilities that the i-PIN provides, to propose the assurance security model for i-PIN. Furthermore, the security analysis results are presented. The result of this paper can be applicable to improve the applicabilities of the i-PIN.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.201-202
• /
• 2022

In this study, the high performance silicone was developed to assure the inter-layer joint in apartment house. The tensile strength, the elongation, the bond strength and the fatigue tests were conducted. As a result, it was confirmed that the performance of high -performance silicone was superior to the existing elastic paint. Therefore, it is expected that it will help to secure the quality of inter-layer joints in apartment houses.