• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1996년도 가을 학술발표회 논문집
• /
• pp.283-289
• /
• 1996

In this paper, the mix design of the super flowing concrete is described with respcet to basic concept, confined water ratio($\beta_p$), volume ratio of water-binder(w/b), volume ratio of fine aggregates($S_r$) and coarse aggregates($G_v$). The primary purposes of this study are to evaluate the effects of cementitious materials(fly ash, slag cement, portland cement), mixing factors ($\beta_p$, w/b, $S_r$, $G_v$)., and to propose the mix design method of the super flowing concrete. As results of this study, confined water ratio($\beta_p$) of cementitious materials is very high (0.99~1.1), and then the ranges of the optimum mixing factors to be satisfied with the super flowing concrete are $S_r$ 47$\ell$ 2%, $G_v$ 52$\ell$ 1%.

• Structural Engineering and Mechanics
• /
• 제52권1호
• /
• pp.97-113
• /
• 2014

In the present work appropriate concrete material models have been proposed to predict drying shrinkage and specific creep of High-performance concrete (HPC) using Artificial Neural Network (ANN). The ANN models are trained, tested and validated using 106 different experimental measured set of data collected from different literatures. The developed models consist of 12 input parameters which include quantities of ingredients namely ordinary Portland cement, fly ash, silica fume, ground granulated blast-furnace slag, water, and other aggregate to cement ratio, volume to surface area ratio, compressive strength at age of loading, relative humidity, age of drying commencement and age of concrete. The Feed-forward backpropagation networks with Levenberg-Marquardt training function are chosen for proposed ANN models and same implemented on MATLAB platform. The results shows that the proposed ANN models are more rational as well as computationally more efficient to predict time-dependent properties of drying shrinkage and specific creep of HPC with high level accuracy.

• 한국건축시공학회지
• /
• 제15권6호
• /
• pp.597-605
• /
• 2015

본 연구에서는 동일 설계기준 강도를 목표로 혼화재의 종류 및 치환율을 달리하여 콘크리트 배합설계를 실시하였으며, 이에 따른 혼화재의 종류가 고강도 콘크리트의 내화성능에 미치는 영향을 검토하고자 ASTM E119의 표준가열온도 곡선에 따른 내화시험을 실시하였다. 그 결과, 고로슬래그를 치환하는 경우 폭렬량이 현저히 저감되는 것으로 나타났으며, 실리카흄을 추가하여 치환하는 경우 폭렬량이 가장 많은 것으로 나타났다. 특히 실리카흄을 단독으로 치환하는 경우 비교적 양호한 폭렬량을 나타냈으나, 고로슬래그와 함께 치환한 시험체의 경우 분말도가 높은 실리카흄이 공극을 밀실하게 함으로써 수증기압의 증가로 인해 폭렬량이 증가한 것으로 판단된다. 또한, 실리카흄을 5% 치환한 시험체의 경우, 고로슬래그 치환율이 증가함에 따라 상대적으로 큰 공극량은 감소하고 미세공극량이 증가함으로써 폭렬량 또한 증가하는 결과를 나타냈다.

• 한국건축시공학회지
• /
• 제3권2호
• /
• pp.129-134
• /
• 2003

In this research, we used fly-ash and blast-furnace slag as substitute material of cement and fine aggregate, and we, through experiments, researched and analyzed the features of high-flowable concrete added high efficiency AE water reduction agent. The results are below. 1. Liquefaction generally presented high-slump flow value; on the other hand, partial segregation was observed in case of mixing proportion with 65 cm slump flow and above. This segregation was partially improved in accordance with mixing admixture. 2. Compressive strength according to mixing admixture and increasing mixing ratio of fly-ash were subject to be declined when it was initially cast-in, but its gap was improved when time was fully passed. 3. After mixing blast-furnace slag and fly-ash as substitute material, the result showed that the modulus of elasticity against freezing & melting was improved according to mixing blast-furnace slag and also increased in accordance with increasing pulverulent-body volume. 4. According to increasing the mixing volume of fly-ash, the durability factor was deteriorated because compressive strength became lower as well as air content was decreased when it was initially case-in. 5. The minimum air content to secure durability was 3.7%, for that reason, we had better secure admixture such as air entraining agent when cast-in high-flowable concrete.

• 한국건축시공학회지
• /
• 제19권6호
• /
• pp.477-484
• /
• 2019

본 연구에서는 EMP차폐 건축구조물 구축시 구조체 자체로써 EMP차폐성능을 발현하는 콘크리트를 개발하기 위한 기초적인 자료를 제시하고자 도전성이 우수하고 조달이 쉬운 금속계열 산업부산물을 EMP차폐용 콘크리트 골재로 사용하기 위해 골재의 안정성 평가 및 EMP차폐 성능평가를 실시하였다. 안정성 평가결과 굵은골재 안정성기준에 만족하였으나 잔골재 안정성 기준에의 경우 전기로산화슬래그는 만족하지 못하였다. 또한 콘크리트의 물성평가 결과 유동성은 증가하는 것으로 나타났으며 공기량이 감소되는 것으로 사료되며. 압축강도는 산업부산물 골재의 높은 밀도와 거친 입형을 가지기 때문에 시멘트 페이스트와 부착력이 증가하여 강도 또한 증가하는 것으로 나타났다. EMP차폐 실험결과 차폐성능이 높은 산업부산물 골재는 전기로산화슬래그와 동제련슬래그 이며 골재의 평균입경이 작거나 균일하게 분포되면 차폐성능은 증가할 것으로 사료된다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.721-724
• /
• 2006

In this study, particle size distribution of cement powder system were adjusted using the blast furnace slag powder, Blaine $2250cm^2/g\;and\;8300cm^2/g$, which easy to adjust particle size distribution to examine how particle size distribution of the binder has an effect on rheological properties of the cement paste. In addition, the relationship between n-value of Rosin-Rammler function and plastic viscosity were discussed. All measured flow curves represented thixotropy behavior and the hysteresis area was smaller for the more added coarse particle. When the combination was based on a ratio of $20{\sim}25vol%$ fine particles, $30{\sim}40vol%$ OPC and $40{\sim}45vol%$ coarse particles of the total volume, a high fluidity and low yield strength was achieved.

• Corrosion Science and Technology
• /
• 제13권6호
• /
• pp.209-213
• /
• 2014

Due to the increasing of interest about the eco-friendly concrete, it is increased to use concretes containing by-products of industry such as fly ash(FA), ground granulated blast furnace slag(GGBFS), silica fume(SF), and etc. Especially, these are well known for improving the resistances to reinforcement corrosion in concrete and decreasing chloride ion penetration. The purpose of this experimental research is to evaluate the resistance against corrosion of reinforcement of high volume fly ash(HVFA) concrete which is replaced with high volume fly ash for cement volume. For this purpose, the concrete test specimens were made for various strength level and replacement ratio of FA, and then the compressive strength and diffusion coefficient for chloride ion of them were measured for 28, 91, and 182 days, respectively. Also, corrosion monitoring by half cell potential method was carried out for the made lollypop concrete test specimens to detect the time of corrosion initiation for reinforcement in concrete. As a result, it was observed from the test results that the compressive strength of HVFA concrete was decreased with increasing replacement ratio of FA but long-term resistances against reinforcement corrosion and chloride ion penetration of that were increased.

• International Journal of Concrete Structures and Materials
• /
• 제8권1호
• /
• pp.69-81
• /
• 2014

In this study, portland cement (PC) has been partially replaced with a Class F fly ash (FA) at level of 70 % to produce high-volume FA (HVFA) concrete (F70). F70 was modified by replacing FA at levels of 10 and 20 % with silica fume (SF) and ground granulated blast-furnace slag (GGBS) and their equally combinations. All HVFA concrete types were compared to PC concrete. After curing for 7, 28, 90 and 180 days the specimens were tested in compression and abrasion. The various decomposition phases formed were identified using X-ray diffraction. The morphology of the formed hydrates was studied using scanning electron microscopy. The results indicated higher abrasion resistance of HVFA concrete blended with either SF or equally combinations of SF and GGBS, whilst lower abrasion resistance was noted in HVFA blended with GGBS.

• 한국건설순환자원학회논문집
• /
• 제4권2호
• /
• pp.157-164
• /
• 2016

본 연구에서는 고로슬래그 미분말 다량 치환한 시멘트 모르타르의 자극재로 탈황석고(FGD)를 사용한 경우, FGD에 포함되어 있는 활성탄의 제거로 체가름방법과 고온가열 조건을 원분과 비교하고, 또한 골재로서 순환골재(RFA)와 천연골재(NFA)를 사용하는 골재종류 변화 조건에서 각종 품질특성을 검토하였다. 실험결과 FGD의 활성탄 제거방법은 $500^{\circ}C$ 고온가열보다 0.3mm 체가름법이 우수하였고, FGD 치환율은 5~10%일 때, 잔골재는 NFA보다 RFA에서 비교적 양호한 결과를 얻을 수 있었다. 그러나 RFA를 이용한 모르타르의 경우는 실무 활용시 건조수축 길이변화율 및 흡수율 측면에서는 용도제한 및 별도의 품질향상 대책이 요구되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.271-273
• /
• 2012

This paper is to investigate the effect of waste cooking oil(WCO) on carbonation resistance of high volume fly ash and blast furnace slag concrete. WCO and paint were applied for carbonation resistance materials. As expected, the application of WCO to the concrete help it reduce carbonation depth remarkably, regardless of mixture types. This may be due to the fact that WCO makes the capillary pore block by activating saponification. It is found that the degree of carbonation reduce due to WCO is much higher than the case by Paint.