• Korean Journal of Ecology and Environment
• /
• v.54 no.4
• /
• pp.272-279
• /
• 2021

A pump-type eDNA filtering system that can control voltage and hydraulic pressure respectively has been developed, and applied a filter case that can filter out without damaging the filter. The filtering performance of the developed system was evaluated by comparing the eDNA concentration with the conventional vacuum-pressured filtering method at the catchment conduit intake reservoir. The developed system was divided into a voltage control (manual pump system) method and a pressure control (automatic pump system) method, and the pressure was measured during filtering and the pressure change of each system was compared. The voltage control method started with 65 [KPa] at the beginning of the filtering, and as the filtering time elapsed, the amount of filtrate accumulated in the filter increased, so the pressure gradually increased. As a result of controlling the pressure control method to maintain a constant pressure according to the designed algorithm, there was a difference in the width of the hydraulic pressure fluctuation during the filtering process according to the feedback time of the hydraulic pressure sensor, and it was confirmed that the pressure was converged to the target pressure. The filtering performance of the developed system was confirmed by measuring the eDNA concentration and comparing the voltage control method and the hydraulic control method with the control group. The voltage control method obtained similar results to the control group, but the hydraulic control method showed lower results than the control group. It is considered that the low eDNA concentration in the hydraulic control method is due to the large pressure deviation during filtering and maintaining a constant pressure during the filtering process. Therefore, rather than maintaining a constant pressure during filtering, it was confirmed that a voltage control method in which the pressure is gradually increased as the filtrate increases with the lapse of filtering time is suitable for collecting eDNA. As a result of comparing the average concentration of eDNA in lentic zone and lotic zone as a control group, it was found to be 96.2 [ng µL^-1] and 88.4 [ng µL^-1l], respectively. The result of comparing the average concentration of eDNA by the pump method was also high in the lentic zone sample as 90.7 [ng µL^-1] and 74.8 [ng µL^-1] in the lentic zone and the lotic zone, respectively. The high eDNA concentration in the lentic zone is thought to be due to the influence of microorganisms including the remaining eDNA.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.1
• /
• pp.110-123
• /
• 2008

The use of CCA as a wood preservative was recently inhibited due to its environmental pollution and human harmfulness. Instead of CCA, copper azole (CuAz) and alkaline copper quaternary (ACQ) have been used as alternative wood preservatives, but the price of the preservatives is much more expensive than that of CCA. As a substitute for high-priced CuAz and ACQ, environmentally friendly wood preservatives were formulated with okara, which is an organic waste from the production of tofu. Prior to formulating the preservatives, okara was hydrolyzed by three levels of sulfuric acid concentration (1, 2.5 and 5%) to easily penetrate the effective components of the preservatives into wood blocks. Final preservative solutions were formulated with the hydrolyzed okara and metal salts, such as copper sulfate, copper chloride and borax. The preservatives were treated into wood blocks by vacuum-pressure method to measure the treatability of the preservatives, and the treated wood blocks were placed in hot water for three days to measure the leachability of the preservatives. The effective components of the preservatives might be successfully penetrated into wood blocks through the uses of hydrolyzed okara and ammonia water. However, the leached amount of effective components was increased as the concentration of acid used for the hydrolysis of okara increased. The treatability and leachability of the preservatives were not affected by hydrolysis temperature but negatively affected by the addition of borax. Based on the results above, the optimal conditions for formulating okara-based wood preservatives cost-effectively and environmentally might be 1% acid hydrolysis of okara and the use of $CuCl_2$ as a metal salt. In addition, the treatability and leachability of okara-based wood preservatives were superior or no differences comparing with those of CuAz. Therefore, it is concluded that okara-based wood preservatives might have a potential to be used as an environmentally friendly wood preservative.

• Food Science of Animal Resources
• /
• v.29 no.4
• /
• pp.437-444
• /
• 2009

${\gamma}-Aminobutyric$ acid (GABA) producing lactic acid bacteria, Lactobacillus acidophilus RMK567 was cultivated in 50 L of sterilized MRS broth using a fermenter at $40^{\circ}C$ for 24 h. The cell number was increased to $10.04{\pm}0.13$ Log CFU/mL with a growth rate constant (k) of 0.454 generation/h and a generation time (g) of 2.303 h after a lapse of a lag phase (L) of 5.16 h. A total of 487 g of cell paste with 40.5% moisture was harvested with viable cell number of 12.48 Log CFU/g cell paste. The cell pastes after preparation with glycerol, glucose, and polydextrose as cryo-protectants were lyophilized under a vacuum of 84 m torr. A total of 408 g of freeze dried (FD) cell powders were mixed with a commercial strain of Streptococcus thermophilus to prepare of three types FD starter cultures with the viable cell numbers of 12.42 (FDA-GY), 12.60 (FDBGG) and 12.91 (FDC-GP) Log CFU/g. During preservation the FD cultures at -$18^{\circ}C$, the cell viability of the FD starter cultures were rapidly dropped to below 3.24% of the day of storage. No significant difference was found in the cell viabilities among three types of FD starters cultures, but significant difference (p<0.01) was found in storage periods. Yoghurts fermented through FD starter culture of L. acidophilus RMK567 were determined to contain $155.16{\pm}8.53$ ppm, $243.82{\pm}4.27$ ppm, and $198.64{\pm}23.46$ ppm of GABA, respectively. This study shows that GABA production activity of L. acidophilus RMK567 is not affected during the freeze drying process and would be available for commercial production of yoghurt containing high GABA content.

• Journal of Animal Science and Technology
• /
• v.50 no.5
• /
• pp.721-732
• /
• 2008

Pressed ham was manufactured to investigate the effects of grape seed oil on the quality characteristics of pressed ham. Five treatments were divided based on differences in the amount of grape seed oil added into the pressed ham. For control, 10% of back fat was only added without grape seed oil. For the first treatment, 10% of grape seed oil among the lard component added into the pressed ham was replaced. For the 2nd, 3rd and 4rd treatments, 20%, 30% and 40% of grape seed oil was respectively replaced. Pressed ham manufactured using grape seed oil was vacuum packaged and then stored for 1, 7, 14, 21 and 28 days at 4℃. Samples were analyzed for shear force value, sensory properties, TBARS and fatty acid composition. In the 1, 21 and 28 days of storage, shear force value of grape seed oil treatment (T4) was significantly lower than that of control (P<0.05). No remarkable differences were found in sensory properties among control and grape seed oil treatment groups. The TBARS value was significantly higher in control than in grape seed oil treatment group(T4) at 28 days of storage (P<0.05). The TBARS of control and grape seed oil treatment groups increased significantly as the storage period increased(P<0.05). The linoleic acid(C18:2) content of grape seed oil treatment groups was significantly higher than that of control(P<0.05). But the contents of C10:0～C20:4 were decreased significantly by grape seed oil additive (P<0.05). Saturated and monounsaturated fatty acid content of control was significantly higher than that of grape seed oil treatment groups(P<0.05). Whereas the increase level of grape seed oil additive resulted in the significantly higher polyunsaturated fatty acid content(P<0.05). Based on these findings, we conclude that the sensory properties and lipid oxidation(TBARS) of manufactured pressed ham were not affected by grape seed oil addition. Also, our results indicate that high-quality pressed ham can be manufactured with strengthen of polyunsaturated fatty acid content.

• Journal of Animal Science and Technology
• /
• v.49 no.1
• /
• pp.109-120
• /
• 2007

CLA was chemically synthesized by alkaline isomerization method using corn oil. CLA-TG was synthesized by chemical reaction using sodium methoxide. For the control, 10% of back fat among the total component was only added without the annex of CLA-TG. For the first treatment, 5% of CLA-TG among the lard component added into the press ham was replaced. For the 2nd, 3rd and 4rd treatments, 10%, 15% and 20% of CLA-TG was respectively replaced. Manufacture press ham using CLA-TG were vacuum packaged and then stored during 1, 7, 14, 21 and 28 days at 4℃. Samples were analyzed for shear force value, sensory evaluation, TBARS, fatty acid composition and CLA content. Shear force value of control was significantly higher than that of CLA-TG treatment groups(P<0.05). All treatments were increased by the passage of storage time. No remarkable differences were found in sensory properties among control and CLA-TG treatment groups. CLA-TG treatment groups showed significantly(P<0.05) lower TBARS value than the control. TBARS value was increased significantly during storage in all treatment. In the change of fatty acid composition, the contents of C14:0～C20:4 were decreased significantly by CLA-TG additive. Whereas the increase level of CLA-TG additive resulted in the significantly higher unsaturated fatty acid and CLA content. Summing up the a forementioned results, press ham manufacturing with CLA-TG additive was not affected in sensory evaluation. Also, it may be assumed that the high quality press ham can be manufactured with the extent of storage period and CLA accumulation.

• Korean Journal of Acupuncture
• /
• v.30 no.4
• /
• pp.252-263
• /
• 2013

Objectives : Skin color deformation by cupping has been widely used as a diagnostic parameter in Traditional Korean Medicine(TKM). Skin color deformation such as ecchymoses and purpura is induced by local vacuum in a suction cup. Since existing studies have relied on a visual diagnostic method, there is a need to use the quantitative measurement method. Methods : We conducted an analysis of cross-polarization photographic images to assess the changes in skin color deformation. The skin color variation was analyzed using $L^*a^*b^*$ space and the skin erythema index(E.I.). The meridian theory in TKM indicates that the condition of primary internal organs is closely related to the skin color deformation at special acupoints. Before conducting these studies, it is necessary to evaluate whether or not skin color deformation is influenced by muscle condition. Hence, we applied cupping at BL13, BL15, BL18, BL20 and BL23 at Bladder Meridian(BL) and measured blood lactate at every acupoint. Results : We confirmed the high system measurement accuracy, and observed the diverse skin color deformations. Moreover, we confirmed that the $L^*$, $a^*$ and E.I. had not changed after 40 minutes(p>0.05). The distribution of blood lactate levels at each part was observed differently. Blood lactate level and skin color deformation at each part was independent of each other. Conclusions : The negative pressure produced by the suction cup induces a reduction in the volumetric fraction of melanosomes and subsequent reduction in epidermal thickness. The relationship between variations of tissue and skin properties and skin color deformation degree must be investigated prior to considering the relationship between internal organ dysfunction and skin color deformation.

• Horticultural Science & Technology
• /
• v.31 no.2
• /
• pp.153-158
• /
• 2013

This research was carried out to investigate silicon (Si) uptake levels by six potted plant species from a nutrient solution supplemented with $K_2SiO_3$. Uniform rooted plants of Dendranthema grandiflorum Ramat., Spathiphyllum patinii N.E. BR., Kalanchoe blossfeldiana, Hedera helix L., Dianthus caryophyllus L., and Euphorbia pulcherrima Willd. were grown in 350 mL boxes, one plant per box, containing a nutrient solution supplemented with either 0, 2.7, or 5.4 mM Si as $K_2SiO_3$. The nutrient solution in each container was adjusted to EC $1.5mS{\cdot}cm^{-1}$ and pH 5.6. The solution in each container was aerated by an 1 m-long polyethylene tube, all connected to a vacuum pump. After 15 days of cultivation in a glasshouse Si contents in the roots and shoots were measured using the colorimetric molybdate method and amount of remaining Si in the nutrient solution was measured using the ICP-AES to calculate the amount of absorption. A simple regression analysis was performed to observe the changes in Si contents in the roots and shoots as affected by concentration of Si supplied to the solution. Among the six species tested, carnation had the greatest and poinsettia the lowest tissue levels of Si concentration in the root, whereas carnation had the greatest and kalanchoe the lowest tissue levels of Si concentration in the shoot. Based on the Si content in the whole plant, Si uptake levels by poinsettia, kalanchoe, and chrysanthemum were low, whereas those by spathiphyllum were intermediate, and those of English ivy and carnation were high. These results indicated that the uptake level of Si by the plant vary depending on plant species.

• Food Science of Animal Resources
• /
• v.27 no.2
• /
• pp.163-170
• /
• 2007

The effects of olive oil on the quality characteristics of pressed ham were investigated. Five different treatments were carried out varying the amount of olive oil added to pressed ham. for the control, 10% back fat among the total ham components was added without any olive oil. For the first treatment, 5% olive oil within the lard component was added into the pressed ham. The 2nd, 3rd and 4th treatments included 10%, 15% and 20% olive oil, respectively. Manufactured pressed hams containing olive oil were vacuum packaged and then stored for 28 days at $4^{\circ}C$. The crude protein and crude fat were not significantly different between the control and olive oil treated hams. The moisture and crude ash contents of olive oil treated hams was significantly lower than that of the control(p<0.05). There was no significant difference in pH between the control and olive oil treated hams. The pH increased during the first 7 days of storage and then decreased somewhat for the remainder of the 28 day storage period for all treatments. The meat color $b^*$ value of olive oil treated hams was higher than that of the control, whereas the meat color $a^*$ value decreased with the inclusion of olive oil. Neither value changed during the period of storage. There was no significant difference in texture between the control and olive oil treated hams throughout the storage period. In summary, pressed ham manufactured with added olive oil showed no change in physico-chemical properties and texture characteristics. Thus, it may be assumed that high quality pressed ham can be manufactured with increased monounsaturated fatty acid content.

• Food Science of Animal Resources
• /
• v.27 no.1
• /
• pp.8-15
• /
• 2007

Conjugated linoleic acid (CLA) was chemically synthesized using the alkaline isomerization method of com oil. CLA-TG was synthesized by reaction with sodium methoxide. Five different treatments were devised based on differences in the amount of CLA-TG added into the pressed han. for controls, 10% of pork back fat among the total component was only added without any CLA-TG. For the first treatment, 5% of CLA-TG among the lard component added into the press ham was replaced. For the 2nd, 3rd and 4th treatments, 10%, 15% and 20% of CLA-TG was respectively replaced. Pressed ham manufactured using CLA-TG was vacuum packaged and then stored for 1, 7, 14, 21 and 28 days at $4^{\circ}C$. Samples were analyzed for chemical composition, physico-chemical properties (pH, color), and texture characteristics. Typical chemical composition characteristics (moisture, crude protein, crude fat) were not significantly different between controls and CLA-TG treatment groups. Crude fat content of CLA-TG treatment groups was significantly lower than that of controls (p<0.05). pH values of controls was higher than that of CLA-TG treatment groups. The pH of control and CLA-TG treatment groups increased significantly as the storage period increased (p<0.05). Meat color (CIE $L^*,\;b^*$) of CLA-TG treatment groups was higher than that of controls. $a^*$ values were decreased by replacement of CLA-TG, but appeared to be unaffected by storage length. There was no significant difference in texture between controls and CLA-TG treatment groups. Based on these findings, we conclude that the physico-chemical properties and texture characteristics of manufactured pressed ham were not affected by CLA-TG addition. Also, our results indicate that high-quality pressed ham can be manufactured with CLA accumulation.

• Food Science of Animal Resources
• /
• v.29 no.2
• /
• pp.178-187
• /
• 2009

This study was carried out to investigate the effects of grape seed oil on quality characteristics of pressed ham. Five different treatments were tested based on differences in the amount of grape seed oil added to the pressed ham. As a control, 10% back fat was added without any grape seed oil. For the first treatment, 10% grape seed oil replaced a portion of the lard component added to the pressed ham. For the 2nd, 3rd and 4th treatments, 20%, 30% and 40% of grape seed oil were substituted for lard, respectively. Pressed ham manufactured with grape seed oil was vacuum packaged and stored for 1, 7, 14,21 and 28 d at $4^{\circ}C$. Samples were analyzed for chemical composition, physico-chemical properties (pH, color) and texture characteristics. Typical chemical composition characteristics (crude protein, crude fat, crude ash) were not significantly different between control and grape seed oil treatment groups. Moisture content of grape seed oil treatment groups (GSO 30% and 40%) was significantly lower than that of controls (p<0.05). There was a not clear difference in pH between control and grape seed oil treatment groups. In the 21 d of storage, pH values of all treatments were significantly higher than those of other storage days. Meat color $(CIEL^*\;and\;b^*)$ of grape seed oil treatment group (GSO 40%) was significantly higher than that of control. Whereas meat color a value of GSO 40% treatment was significantly lower than that of control. It was not clearly changed as storage time increased. There was no significant difference in texture between control and grape seed oil treatment groups, and appeared to be unaffected by storage length. Based on these findings, we conclude that the chemical composition and texture characteristics of manufactured pressed ham were not affected by grape seed oil addition. These results also indicate that high-quality pressed ham can be manufactured with increased polyunsaturated fatty acid content.