• Geomechanics and Engineering
• /
• v.33 no.2
• /
• pp.141-154
• /
• 2023

This study investigated the effect of water retention characteristics between aged and fresh Municipal Solid Waste (MSW) on the stability of the landfill. A series of transient numerical modeling for the slope of an MSW landfill was performed considering the variation of water retention characteristics due to leachate circulation. Four different scenarios were considered in this analysis depending on how to obtain hydraulic conductivity and the aging degree of materials. Unsaturated hydraulic properties of the MSW used for the modeling were evaluated through modified hanging column tests. Different water retention properties and various landfill conditions, such as subgrade stiffness, leachate injection frequency, and gas and leachate collection system, were considered to investigate the pore water distribution and slope stability. The stability analyses related to the factor of safety showed that unsaturated properties under those varied conditions significantly impacted the slope stability, where the factor of safety decreased, ranging between 9.4 and 22%. The aged materials resulted in a higher factor of safety than fresh materials; however, after 1000 days, the factor of safety decreased by around 10.6% due to pore pressure buildup. The analysis results indicated that using fresh materials yielded higher factor of safety values. The landfill subgrade was found to have a significant impact on the factor of safety, which resulted in an average of 34% lower factor of safety in soft subgrades. The results also revealed that a failed leachate collection system (e.g., clogging) could result in landfill failure (factor of safety < 1) after around 298 days, while the leachate recirculation frequency has no critical impact on stability. In addition, the accumulation of gas pressure within the waste body resulted in factor of safety reductions as high as 24%. It is essential to consider factors related to the unsaturated hydraulic properties in designing a landfill to prevent landfill instability.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.8
• /
• pp.1606-1616
• /
• 2011

The blood pressure measuring equipment, which is being supplied and used most widely by being recognized convenience and accuracy now generally, is oscillometric blood pressure monitor. However, a change in blood pressure is basically influenced by diverse elements such as each individual's physiological status and physical condition. Thus, the measurement of blood pressure, which used single element called oscillation in blood pressure of being conveyed to cuff, is not considered on physiological elements such as cardiovascular system status and blood vessel stiffness index, and on external elements, thereby being quite in error. Accordingly, this study detected diverse bio-signals and body informations in each individual as the measurement subject such as ECG, PPG, and Korotkoff Sound in order to enhance convenience and accuracy of measuring blood pressure in the complex measurement equipment, thereby having extracted regression method for compensation in error of oscillometric blood pressure measurement on the wrist, and having improved accuracy of measuring blood pressure. To verify a method of improving accuracy, the blood pressure value in each of SBP, DBP, MAP was acquired through 4-stage experimental procedure targeting totally 51 subjects. Prior to experiment, the subjects were divided into two groups such as the experimental group for extracting regression method and the control group for verifying regression method. Its error was analyzed by comparing the reference blood pressure value, which was obtained through the auscultatory method, and the oscillometric blood pressure value on the wrist. To reduce the detected error, the blood pressure compensation regression method was calculated through multiple linear regression analysis on elements of blood pressure, individual body information, PTT, HR, K-Sound PSD change. Verification was carried out on improving significance and accuracy by applying the regression method to the data of control group. In the experimental results, as a result of confirming error on the reference blood pressure value in SBP, DBP, and MAP, which were acquired through applying regression method, the results of $-0.47{\pm}7.45$ mmHg, $-0.23{\pm}7.13$ mmHg, $0.06{\pm}6.39$ mmHg could be obtained. This is not only the numerical value of satisfying the sphygmomanometer reference of AAMI, but also shows the lower result than the numerical value in SBP : $-2.5{\pm}12.2$ mmHg, DBP : $-7.5{\pm}8.4$ mmHg, which is the mean error in the experimental results of Brram's research for verifying accuracy of Omron RX-M, which shows relatively high accuracy among wrist sphygmomanometers. Thus, the blood pressure compensation could be confirmed to be made within significant level.

• Steel and Composite Structures
• /
• v.47 no.1
• /
• pp.91-102
• /
• 2023

To study the evaluation standard and control limit of mortar filling layer void length, in this paper, the train sub-model was developed by MATLAB and the track-bridge sub-model considering the mortar filling layer void was established by ANSYS. The two sub-models were assembled into a train-track-bridge coupling dynamic model through the wheel-rail contact relationship, and the validity was corroborated by the coupling dynamic model with the literature model. Considering the randomness of fastening stiffness, mortar elastic modulus, length of mortar filling layer void, and pier settlement, the test points were designed by the Box-Behnken method based on Design-Expert software. The coupled dynamic model was calculated, and the support vector regression (SVR) nonlinear mapping model of the wheel-rail system was established. The learning, prediction, and verification were carried out. Finally, the reliable probability of the amplification coefficient distribution of the response index of the train and structure in different ranges was obtained based on the SVR nonlinear mapping model and Latin hypercube sampling method. The limit of the length of the mortar filling layer void was, thus, obtained. The results show that the SVR nonlinear mapping model developed in this paper has a high fitting accuracy of 0.993, and the computational efficiency is significantly improved by 99.86%. It can be used to calculate the dynamic response of the wheel-rail system. The length of the mortar filling layer void significantly affects the wheel-rail vertical force, wheel weight load reduction ratio, rail vertical displacement, and track plate vertical displacement. The dynamic response of the track structure has a more significant effect on the limit value of the length of the mortar filling layer void than the dynamic response of the vehicle, and the rail vertical displacement is the most obvious. At 250 km/h - 350 km/h train running speed, the limit values of grade I, II, and III of the lengths of the mortar filling layer void are 3.932 m, 4.337 m, and 4.766 m, respectively. The results can provide some reference for the long-term service performance reliability of the ballastless track-bridge system of HRS.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.5
• /
• pp.1789-1794
• /
• 2015

Background: Non-alcoholic fatty liver disease (NAFLD), the most common liver problem in diabetes, is a risk factor for liver cancer. Diabetes, high body mass index (BMI) and old age can all contribute to NAFLD progression. Transient elastography (TE) is used for non-invasive fibrosis assessment. Objectives: To identify the prevalence of NAFLD and significant hepatic fibrosis in diabetic patients and to assess associated factors. Materials and Methods: One hundred and forty-one diabetic and 60 normal subjects were screened. Fatty liver was diagnosed when increased hepatic echogenicity and vascular blunting were detected by ultrasonography. Liver stiffness measurement (LSM) representing hepatic fibrosis was assessed by TE. LSM ${\geq}7$ kPa was used to define significant hepatic fibrosis. Results: Four cases were excluded due to positive hepatitis B viral markers and failed TE. Diabetic patients had higher BMI, systolic blood pressure, waist circumference and fasting glucose levels than normal subjects. Fatty liver was diagnosed in 82 (60.7%) diabetic patients but in none of the normal group. BMI (OR: 1.31; 95%CI: 1.02-1.69; p=0.038) and alanine aminotransferase (ALT)(OR: 1.14; 95%CI: 1.05-1.23; p=0.002) were associated with NAFLD. Diabetic patients with NAFLD had higher LSM than those without [5.99 (2.4) vs 4.76 (2.7) kPa, p=0.005)]. Significant hepatic fibrosis was more common in diabetic patients than in normal subjects [22 (16.1%) vs 1 (1.7%), p=0.002]. Aspartate aminotransferase (AST)(OR: 1.24; 95%CI: 1.07-1.42; p=0.003) was associated with significant hepatic fibrosis. Conclusions: Sixty and sixteen percent of diabetic patients were found to have NAFLD and significant hepatic fibrosis. High BMI and ALT levels are the predictors of NAFLD, and elevated AST level is associated with significant hepatic fibrosis.

• Journal of Acupuncture Research
• /
• v.18 no.5
• /
• pp.33-42
• /
• 2001

Objective : To evaluate the effect of treatment for Rheumatoid arthritis by using Bee-venom Acupuncture that is well known for anti-inflammatory effect and function of activating immune system. Methods : Evaluated the result of Bee-venom Acupuncture treatment twice in a week for patients who diagnosised as rheumatoid arthritis by 7 criteria of US Rheumatism Academy. Results : 1. If you see the distribution chart, sexual rate of male and female was 1:2.75 and age distribution shows as age ascend it shows high. 2. If you see the duration distribution, it shows chronic tendency in order of more than 6 months (59.5%), 2 to 5 months, and 1 month. 3. If you see the invaded region distribution, it shows chronic tendency in order of finger(17 cases), wrist joint(16 cases), knee joint(16 cases), ankle joint(10 cases), elbow joint(8 cases), shoulder joint(7 cases), feet(7 cases), hip joint(5 cases), low back(3 cases) and neck(2 cases). 4. If you see the result of duration distribution treatment, the improvement index is rising in order of within a month, 2 to 5 months, and over 6 months. So it shows that it has good result of treatment within a month. 5. If you see the invaded region, it shows high improvement index in order of low back, hop joint, shoulder joint, wrist joint, feet, knee joint, finger, elbow joint, ankle joint and neck. 6. If you see the result of morning stiffness time before treatment, it shows good effect of treatment in order of 2-3hrs, 30min.-an hr, an hr to 2hrs, and 0-30min. 7. If you see the patients satisfaction after Bee-venom Acupuncture treatment, Excellent is 6 cases, Good is 7 cases, and Moderate 2 cases. Conclusions : It will have greater treatment effect if herbal medicine, moxibustion, and acupuncture are used together as patients whole body condition and symptoms with Bee-venom Acupuncture for rheumatoid arthritis that is chronic inflammatory disease.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.573-581
• /
• 2006

This experiment was conducted to determine the effects of supplemental methionine, lysine, choline, and sulfur on laying performance, metabolic parameters, and egg quality of hens fed diets containing sorghum (Sorghum vulgare) during the peak laying period. Lohman layers (n = 144), 30-wk of age as 6 replicate cages of 4 hens, were allocated randomly to receive basal diets containing either 22% corn (B) or 22% sorghum (BS) and diets BS plus 0.57% methionine, 0.66% lysine, 0.47% choline, or 0.05% sulfur for 98 d. Feed intake (FI) and egg production (EP) were recorded daily, egg weight (EW) was measured bi-weekly, and body weight (BW) was measured monthly. A sample of 12 eggs from each experimental group was collected every month to evaluate egg quality. At the end of the experiment, blood samples were collected for metabolite concentrations. Data were analyzed using one-way ANOVA as repeated measures and significant differences between the experimental groups were assessed using Duncan's Multiple Range test. Partial replacement of corn with sorghum in the basal diet did not affect BW, EP, and FCR but increased FI by 5.7% and EW by 2.4%. The effects of additives on laying performance were variable. Except for serum total protein (STP) concentration, other metabolic parameters were not affected by partial replacement of corn with sorghum in the basal diet. Hens fed diet BS had lower SPT concentration than hens fed diet B. Except for methionine supplementation, other supplements ameliorated depression in STP concentration. The additives did not affect other metabolic parameters. Egg quality responses to the experimental diets were also variable. Partial replacement of corn with sorghum in the basal diet did not affect eggshell characteristics (both thickness and stiffness), whereas it had variable effects on inner egg quality parameters (increased yolk index, depressed yolk color, and unaltered albumen index and Haugh unit). In conclusion, laying hen diets could include low-tannin sorghum (0.26%) up to 22% without necessitating extra supplements to overcome compromised performance.

• Geomechanics and Engineering
• /
• v.15 no.4
• /
• pp.1017-1027
• /
• 2018

To explore the influence of coal thickness on the mechanical behavior and the failure characteristics of rock-coal-rock (RCR) mass, the experimental investigation of uniaxial compressive tests was conducted first and then a systematic numerical simulation by particle flow code (PFC2D) was performed to deeply analyze the failure mechanical behavior of RCR specimens with different coal thicknesses in conventional compression tests. The overall elastic modulus and peak stress of RCR specimens lie between the rock and the coal. Inter-particle properties were calibrated to match the physical sample strength and the stiffness response. Numerical simulation results show that the deformation and strength behaviors of RCR specimens depend not only on the coal thickness, but also on the confining pressure. Under low confining pressures, the overall failure mechanism of RCR specimen is the serious damage of coal section when the coal thickness is smaller than 30 mm, but it is shear failure of coal section when the coal thickness is larger than 30 mm. Whereas under high confining pressures, obvious shear bands exist in both the coal section and the rock section when the coal thickness is larger than 30 mm, but when the coal thickness is smaller than 30mm, the failure mechanism is serious damage of coal section and shear failure of rock section.

• The Journal of Korean Academy of Prosthodontics
• /
• v.33 no.4
• /
• pp.780-806
• /
• 1995

The purpose of this study was to describe the application of 3D finite element analysis to determine resultant stresses on the bone anchored fixed prosthesis, implants and supporting bone of the mandible according to fixture numbers and load conditions. 4 or 6 fixtures and the bone anchored fixed prosthesis were placed in 3D finite element mandibular arch model which represents an actual mandibular skull. A $45^{\circ}$ diagonal load of 10㎏ was labiolingually applied in the center of the prosthesis(P1). A $45^{\circ}$ diagonal load of 20㎏ was buccolingually applied at the location of the 10mm or 20mm cantilever posterior to the most distal implant(P2 or P3). The vertical distribution loads were applied to the superior surfaces of both the right and the left 20mm cantilevers(P4). In order that the boundary conditions of the structure were located to the mandibular ramus and angle, the distal bone plane was to totally fixed to prevent rigid body motion of the entire model. 3D finite element analysis was perfomed for stress distribution and deflection on implants and supporting bone using commercial software(ABAQUS program. for Sun-SPARC Workstation. The results were as follows : 1. In all conditions of load, the hightest tensile stresses were observed at the metal lates of prostheses. 2. The higher tensile stresses were observed at the diagonal loads rather than the vertical loads 3. 6-implants cases were more stable than 4-implants cases for decreasing bending and torque under diagonal load on the anterior of prosthesis. 4. From a biomechanical perspective, high stress developed at the metal plate of cantilever-to-the most distal implant junctions as a consequence of loads applied to the cantilever extension. 5. Under diagonal load on cantilever extension, the 6-implants cases had a tendency to reduce displacement and to increase the reaction force of supporting point due to increasing the bendign stiffness of the prosthesis than 4-implants cases. 6. Under diagonal load on cantilever extension, the case of 10mm long cantilever was more stable than that of 20mm long cnatilever in respect of stress distribution and displacement. 7. When the ends of 10mm or 20mm long cantilever were loaded, the higher tensile stress was observed at the second most distal implant rather than the first most distal implant. 8. The 6-implants cases were more favorable about prevention of screw loosening under repeated loadings because 6-implants cases had smaller deformation and 4-implants cases had larger deformation.

• Journal of dental hygiene science
• /
• v.3 no.2
• /
• pp.59-66
• /
• 2003

As a basic research material to make more efficient healthcare and health promotion for dental hygienists, this study intends to determine which factors may affect their awareness of occupational diseases. For this sake, this study attempted to investigate into a variety of literatures and data, and applied a questionnaire survey to 160 dental hygienists for about 5 months(from June to October 2003), who were all employed in domestic dental clinics or offices. As a result of analysis, this study can be concluded as follows: (1) The result of analyzing how dental hygienists recognized their occupational diseases showed that 'stiffness in muscle, neck or shoulder due to intensive use of specific physical regions' and 'stress resulting from the attributes of each task' reached the highest awareness(90.6%) of all, which was followed by 'lower eyesight due to detailed or even sophisticated tasks for many hours(65%)' and 'symptoms of ruptured disk due to standing tasks as dental hygienists do for many hours(62.5%).' (2) The result of analyzing how dental hygienists recognize their occupational diseases showed that their awareness averaged 7.28 points out of 14 points, which implies that their awareness of occupational diseases is not very high. Meanwhile, the result of examining how they recognize detrimental or harmful properties of given materials against human body showed that a majority of total respondents(74.4%) regarded given materials as detrimental to human body. (3) The result of examining how dental hygienists recognize their occupational diseases showed that a majority of total respondents(91.9%) identified their own occupational diseases. Many of total respondents(41.9%) pointed out that environmental improvement around workshop in each clinic or office should be foremost prerequisite to health and welfare for dental hygienists. Next, 34.4% of total respondents pointed out the necessity to perform in-house health diagnosis and examination on a regular basis, and 13.1% of total respondents thought it necessary to carry on healthcare education into harmful properties in the aspect of dental materiology, respectively.