• 센서학회지
• /
• 제31권6호
• /
• pp.423-427
• /
• 2022

A pressure sensor that mimics the sensing ability of human skin has emerged as high-profile technology because it shows remarkable applications in numerous fields such as robotics, human health monitoring, and artificial prosthetics. Whereas recent pressure sensors have achieved high sensitivity similar to that of human skin, they still show limited detection bandwidth. Moreover, once these e-skin are fabricated, their sensitivity and stiffness are fixed; therefore, they can be used for only limited applications. Our study proposes a new adaptive pressure sensor built with uniform gallium microdroplet-elastomer composite. Based on the phase transition of gallium microdroplets, the proposed sensor undergoes mode transformation, enabling it to have a higher sensitivity and wider detection bandwidth compared with those of human skin. In addition, we succeeded in extending a single adaptive pressure sensor to sensor arrays based on its high uniformity, reproducibility, and large-scale manufacturability. Finally, we designed an adaptive e-skin with the sensor array and demonstrated its applications on health monitoring tasks including blood pulse and body weight measurements.

• 한국의류산업학회지
• /
• 제8권1호
• /
• pp.129-133
• /
• 2006

To develope a high value-added fiber products which is useful in the human body physiology, the Macban stone was deposited on the PET fabric by sputtering and its effects were investigated. Then, a Macban stone target was prepared for sputtering treatment and treated on the PET fabric by RF sputtering process. After treatment, surface observation by SEM, far-infrared emissivity and emissive power, the fastness to washing and light, bacteriostatic rate, electrostatic, drape stiffness, and breaking strength of PET fabric were investigated. From these investigation, the following conclusions were obtained. 1) The Macban stone was able to deposit on the PET fabric, by the RF sputtering treatment which is eco-friendly dry textile finishing. 2) The far-infrared emissivity and emissive power of sputtered PET fabrics were increased. 3) When PET fabric was treated by sputtering with Macban stone, the amount of deposited Macban stone increased with increasing treatment time and it was deposited on the fabric surface firmly. 4) The bacteriostatic rate of sputtered PET fabrics was about 20%. 5) The electrostatic charge of fiber surface was reduced by sputtering. 6) The fastness washing to light of dyed fabric were improved by the deposition of Macban stone, but the breaking strength was not changed by sputtering. 7) The drape stiffness of sputtered PET fabrics increased with increasing treatment time.

• 지역사회간호학회지
• /
• 제7권2호
• /
• pp.400-409
• /
• 1996

To investigate industrial fatigue and low back pain, the questionaire survey for subjective symptoms of fatigue and low back pain was carried out among 591 male workers aged 20-55 employed in an automobile industry in Korea. Workers participated to this study were divided into low back pain group(LBP) and control group, according to the self-reports by written questionaires. The subjective sysptoms of fatigue comprised three groups of 10 items each, representing dullness and sleepiness(level of cerebral activation), difficulty in concentration(level of motivation) and bodily projection of fatigue. The resultant data were processed for $\chi^2-test$, t-test and a pearson's correlation coefficient to confirm the relationships. The results were as follows: 1. 30 items of fatigue subjective symptoms exeptone item, 'lack in perseverance', were directly associated with low back pain. 2. The percentage of fatigue complaint were sig nificantly higher in LBP group. 3. Of the 30 items of fatigue subjective symptoms, the highest percentage was accounted for 'eye strain'(27.9%), followed by 'whole body feels tired' and 'legs feel heavy'(22.9%), 'feel like lying'(21.4%), 'feel a pain in the low back'(18.7%), 'feel drowsy'(16.4%) and 'feel stiffness in the neck or the shoulders'(16.2%) in the order of sequence. 4. The average weighted score for the first group of fatigue items(dullness and sleepiness) was the largest among three groups and was followed by the second group(difficulty in concentration) and the third group(bodily projection of fatigue) in the order of sequence, suggesting the heavier shift work stress of the workers. 5. In the groups of the aged 30-40, work duration of 5-7yrs, heavy work amount and irregular work speed, significant high fatigue complaints were revealed in terms of eye strain, whole body feels tired, legs feel heavy, feel like lying, feel a pain in the low back and feel stiffness in the neck or the shoulders. 6. A significant negative correlations were shown between age, work duration and eleven subjective symptoms while positive reciprocal correlations were shown between eleven items with one another.

• 항공우주시스템공학회지
• /
• 제13권3호
• /
• pp.78-86
• /
• 2019

본 연구에서는 전개성능을 고려한 대형 전개형 SAR 안테나의 회전스프링 힌지의 강성 최적설계에 대해 기술한다. 대형 전개형 SAR 안테나는 발사환경에서는 접혀 있다가 궤도에서 임무를 수행할 때 펼치게 된다. 이러한 조건에서 여러 장으로 구성된 안테나 패널을 주어진 시간 내에 최소의 충격으로 전개할 수 있도록 회전스프링 힌지의 적절한 강성을 찾는 것은 매우 중요하다. 회전스프링 강성이 강하면 완전 전개시점에서 발생하는 큰 충격하중이 구조체에 손상을 주며, 약하면 전개 저항으로 인해 완전전개를 보장할 수 없기 때문이다. 이러한 문제를 해결하기 위해서 RecurDyn을 이용한 다물체동역학 해석모델을 생성하였으며 전개해석을 통해 전개성능(전개시간 전개충격하중)을 도출하였다 최적의 회전스프링 강성을 찾기 위해 이에 따른 전개성능을 반응표면법을 통해 근사화 시켰으며 최적설계를 수행하여 적절한 회전스프링의 강성 값을 도출하였다.

• 디지털융복합연구
• /
• 제13권9호
• /
• pp.515-521
• /
• 2015

본 연구에서는 우리는 평균 연령이 높은 제주 해녀의 경-대퇴 맥파 전도 속도와 발목-상완지표를 측정하여 찬물에서 산소의 보조 없이 채취활동을 하는 제주 해녀의 동맥 혈관의 경직도를 측정하였으며, 결과는 다음과 같다. 첫째, 경-대퇴 맥파 전도 속도는 동연령대의 일반여성보다 유의하게 낮게 나타났다. 둘째, 발목-상완지표(ABI)는 해녀와 일반여성 모두 정상범위 안에 포함되어 있었으며, 일반여성보다 해녀집단이 높은 경향을 보였다. 이러한 결과는 고령의 나이임에도 불구하고 장기간 침수활동을 통해 신체의 적응이 이미 완료된 상태로써 저온 및 높은 수압환경에 대한 적응이 완료된 신체상태이며, 아울러 높은 신체활동 수준으로 인하여 말초혈관저항이 고연령임에도 불구하고 감소되지 않았으며, 오히려 동연령 여성들보다 양호한 수준임을 확인할 수 있었다. 하지만 해녀들의 고령화는 여전히 진행되고 있는 중요한 현상이기에 동맥혈관경직도에 대한 관심과 향후의 지속적인 연구는 반드시 더 필요할 것으로 보인다.

• 동의신경정신과학회지
• /
• 제7권1호
• /
• pp.65-75
• /
• 1996

This paper is for studying stress condition of apprentice doctors who were in Oriental Medical Hospital. This study was done on 35 apprentice doctors who were in Kyungsang University Oriental Medical Hospital and Bulgy Oriental Medical Hospital. The Seven-Minute Stress Test of Thomas E. Sttats and 10 questions which were made by the present writer shows the following results.1. The Body stress scale was the highest point. In order of high percent, this shows Whole scale, Mind scale, Situation scale. 2. In comparison of the stress scale of men and women doctors, all the stress scale of women doctors were higher than men doctors. 3. In comparison of the stress scale of Interne and Resident doctors, Whole and Situation stress scale of Resident doctors were higher than Interne doctors, Body and Mind stress scale of Interne doctors were higher than Resident doctors. 4. The personal relation with other people was harmonious, the worst relation of the other colleague was the administrative staff, the next were nurses, senior apprentice doctors orderly. 5. In order of high percent of stressors, this shows personal relation, many works and troubles of care, the lack of private life, unsatisfactory administration system and equipment, the class system and overbearing atmospheres, education and continuous stress, bad conditions and fatigue, economic problems. 6. In order of high percent of systemic stress diseases, this shows musculo- skeletal disease, nervous disease, digestive disease, neurosis, urinary and genital disorder, opthalomo-otolaryngo disease, immunity disorder and vascular disease. In order of high percent of stress symptom, this show headache, fatigue, shoulder pain, back and leg pain, pantalgia and abdominal pain, diarrhea and dismenorrhea, stiffness of neck dizziness indigestion languor after a meal insomnia, neurasthenia lacking interest constipation menorrhalgia bloodshot eyes otitis media allergy thirst flushing edema. 7. In order of the seven mode of emotions in relation to stress, this shows anger, anxiety, isolation, melancholy, fright, sorrow, terror, overjoy.

• 콘크리트학회논문집
• /
• 제19권5호
• /
• pp.623-630
• /
• 2007

주로 교량 슈 (shoe)나 기계 기초 등과 하부 콘크리트 구조체간의 공극을 충전시켜 상부 구조물과 하부 구조물을 일체화하는데 사용되는 그라우트재는 구조물의 특성상 주로 큰 하중을 받는 부위에 시공되기 때문에 높은 압축강도를 갖는 제품 위주로 개발 사용되어 왔다. 그러나 고강성 위주로 제품이 개발되어 한계응력 이상에서는 구조체가 갑자기 파괴되는 취성체라는 구조적 문제점을 안고 있고, 연속 및 반복하중 등의 응력에 의한 누적 피로에 의해 균열 등의 성능 저하 현상이 발생할 수 있다 또한, 초기 고강도를 유지하기 위해 발열 특성이 높은 속경성 재료를 과다하게 사용함으로써 대형 부재인 경우 수화열 등에 의한 균열발생 우려의 문제 등도 안고 있다. 본 연구는 이와 같은 문제들을 개선하기 위해, 탄성재료인 분말 폐타이어 및 분말 수지를 이용하여 기존의 고유동, 무수축, 고강도 특성 이외에 고인성과 고내구성을 부여하여 보다 안정적으로 시공될 수 있으며, 모체와의 일체성을 향상시키기 위한 그라우트재의 분체 조성물을 개발하였다 또한, 부수적으로 분말 폐타이어 및 플라이애쉬와 같은 산업폐기물을 재활용할 수 있도록 하여 환경친화적인 건설 재료를 제공하는 데에도 기여하였다. 이를 위해 총 7가지 배합 조건별 실험이 진행되었고, 이를 통해 최적 배합 조건을 선정하였다.

• Clinical and Experimental Pediatrics
• /
• 제57권5호
• /
• pp.217-221
• /
• 2014

Purpose: The aim of this study was to determine whether school-aged children with Kawasaki disease (KD) have an increased risk for early atherosclerosis. Methods: The study included 98 children. The children were divided into the following groups: group A (n=19), KD with coronary arterial lesions that persisted or regressed; group B (n=49), KD without coronary arterial lesions; and group C (n=30), healthy children. Anthropometric variables and the levels of biochemical markers, including total cholesterol, high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), apolipoprotein A, apolipoprotein B, homocysteine, highsensitivity C-reactive protein (hs-CRP), and brachial artery stiffness using pulse wave velocity were compared among the three groups. Results: There were no significant differences in blood pressure and body index among the three groups. Additionally, there was no sex-specific difference. Moreover, the levels of triglyceride, HDL-C, apolipoprotein A, and hs-CRP did not differ among the three groups. However, the levels of total cholesterol (P =0.018), LDL-C (P =0.0003), and apolipoprotein B (P =0.029) were significantly higher in group A than in group C. Further, the level of homocysteine and the aortic pulse wave velocity were significantly higher in groups A and B than in group C (P=0.0001). Conclusion: School-aged children after KD have high lipid profiles and arterial stiffness indicating an increased risk for early atherosclerosis.

• 한국정밀공학회지
• /
• 제22권9호
• /
• pp.147-154
• /
• 2005

A precision hi-directional actuator for a high precision leveling system with $Z{\Theta}_x{\Theta}_y$ motions is proposed and designed in this paper. The actuator is composed of a force generation structure, a guide mechanism, and a symmetric structure. At first, its driving force is generated by a change of flux in air gaps by permanent and changeable flux. The permanent flux is generated by a permanent magnet. The changeable flux is created by variable current flowing through coil. The combination of permanent and changeable flux makes various flux densities in air gaps between moving part and fixed yokes. And then, the difference between flux densities in lower and upper gaps creates forces fur the $bi-direction({\pm}z)$ motion. The guide mechanism of this actuator is composed of two circular plates and one shaft. Reducing motions generated by forces except z-motion, these circular plates endow the actuator with high stiffness for fast settling time. And the function of the shaft is to transfer motion to an object. At last, total body has a symmetric structure to be stable on thermal error. The actuator is designed by MAXWELL 2D and ProMECHANICA. The designed actuator is evaluated by 8nm laser doppler vibrometer, dynamic signal analyzer, and simple PID controller.

• Interaction and multiscale mechanics
• /
• 제3권4호
• /
• pp.365-372
• /
• 2010

Station is an important building in high-speed railway, and its vibration and noise may significantly affect the comfort of waiting passengers. A coupling vibration model for train-structure system is established to analyze and evaluate the vibration level of a typical waiting hall under dynamic train load. The motion of a four-axle vehicle with two suspension system is modeled in multi-body dynamics with linear springs and dampers employed. The station is modeled as a whole finite element structure which is 113 m in longitudinal and 163.5 m in lateral, and the stiffness of the station foundation is considered. According to the assumptions that both wheel and rail are rigid bodies and keep contact to each other in vertical direction, and the wheel/rail interaction and displacement coordination in horizontal direction is defined by the simplified Kalker creep theory, the vehicle spatial vibration model has 27 degrees-of-freedom. An overall analysis procedure is made of the train moving through the station, by which the dynamic responses of the train and the station are calculated. According to the comparison between analysis and test results, the actual connection status between different parts of the station is estimated and the vibration level of the waiting hall is evaluated.