• 전기학회논문지
• /
• 제65권8호
• /
• pp.1450-1456
• /
• 2016

In this paper, we have checked a method of performance evaluation for electronic pedal, which is a core technology of HBD for detecting the axle temperature of high-speed train. As it is practically impossible to conduct train speed test of 500 km/h, we utilize a high speed rotor for evaluating high speed performance of the electronic pedal instead. According to this method, we found that the measurement results by the velocity measuring instrument is similar with the ones from this research through the high speed rotor. In conclusion, it will be possible to conduct reliability evaluation for high speed performance for Beacon, Balise and RFID, which are utilized for transmitting vital information of train control systems through using the rotor.

• 전기학회논문지
• /
• 제66권4호
• /
• pp.727-732
• /
• 2017

This paper describes the dynamic characteristics depending on installation condition between a pantograph and an OCL (Overhead Contact Line) on a new high speed line in Korea. The current collection performance between the pantograph and the OCL was tested during train operation from Suseo to Jije stations. The current collection performance is evaluated based on the duration of an arc by using an arcing measurement system. The system consists of an optical sensor for measuring the duration of an arc and a camera for monitoring current collection performance. An arcing duration is defined as a percentage of arcing in international standards. This test aims to analyze the locations of repetitive arcing depending on installation conditions of OCLs on a new high speed line in order to use the result as reference data for correct construction and maintenance.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.362-368
• /
• 2005

The KTX is now operating to the commercial purpose at Gyeong-Bu high speed railroad and Ho-Nam conventional railroad to be started on April, 2004. The trains were not found any problems at high speed railroad, but at Ho-Nam line were known to be have the few problems due to operating no planed. In this report should be studied for the effects of the lateral forces and wheel bases, brake distances etc., that high speed trains should be considered on curve running at the conventional railroad. The studied contents for operating at the conventional railroad shall be checked for the technical requirements from design stage, and the trains should be supplied and manufactured to car system to have the good running performances.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.1176-1181
• /
• 2003

As the delay of the Kyungbu High Speed Railroad, HST should use conventional line through Daegoo to Pusan until the new railroad build. High speed railroad noise is one of the main causes of environmental impact. Whenever HST on conventional railroad line is planned or HST service into the urban center is proposed, an estimate of the relevant noise levels is usually required. For this, it is necessary to quantify those parameters that affect the railroad noise. This paper deals with an estimation of high speed railroad noise in urban center.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1320-1325
• /
• 2006

When the train running on the high-speed track, there is a speed band which track distortion is unusually increased according to the condition of track and roadbed. This speed is called critical velocity and physical parameter values are increased greatly. These phenomenon happened as high-speed train were developed, studied regularly through TGV 100 running test in France. As research result until now, the main reason is soft roadbed's bearing capacity. Wave propagation and track support capacity is varied by the ground characteristics. This paper achieved theoretical examination about resonance band(speed and frequency) that occurred in roadbed on the base rock in point of geotechnical engineering. The examination of resonance divides with ground response analysis, critical band analysis by the shear wave velocity of roadbed and train critical speed through the ground stratum.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.359-370
• /
• 2010

2004년 4월에 경부고속철도 1단계 구간이 개통되어 국민들에게 새로운 고속열차 서비스를 제공하여 고객 만족도 향상 및 수익증대에 기여하고 있다. 이와 더불어 오는 2010년 말에 대구~부산간 경부고속철도 2단계 구간이 개통되면 서울~부산간 이동시간이 단축되고 신설되는 경주, 울산지역에도 고속철도 서비스를 제공하게 된다. 이에 본 연구에서는 경부고속철도 2단계 개통시 신설되는 경주, 울산역에 대하여 시내와의 연계 서비스 운영방안에 대하여 살펴보고 연계 수요의 분석을 통한 연계 서비스 전후 효과를 분석하고 아울러 경제적 효과에 대한 분석을 시행하였다. 이를 통하여 신설되는 경주, 울산역에 대한 효과적인 연계 서비스 방안을 통한 고객 만족도 향상 및 철도의 수익 증대 방안에도 기여할 것으로 기대된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.1624-1626
• /
• 2004

On the 105th year of the Korean Railroad, Korea railroad is at the advent of the high speed operation with an commercial operation of KTX(Korea Train eXpress), the fifth high speed line in the world, between Pusan and Seoul at the speed of 300km/hr. In order to enhance nation competitiveness in $21^{st}$ century, Korea Railroad is faced with a task of improving the railroad network in the areas of new line constructions, betterment of existing rail lines, increasing the operation speed and transportation capacity and modernization of rolling stock fleet.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.581-585
• /
• 2004

The purpose of this study is to suggest a method to support decision making of researchers, when we estimate the safety of the high-speed railway using F-AHP. To apply this method, Korean type of high-speed railway was engaged, and the 8 Stages of accident type and the five criteria were suggested that we must meet. Then, the interview with the researchers working for high-speed railway was used to confirm the alternatives suggested. The employed F-AHP for this study estimate using emotional words based on AHP of Saaty, so it is very good to estimate the high-speed railway safety.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1256-1257
• /
• 2011

유도급전용 변압기(Inductive Power Transformer, IPT)는 비접촉 전력전송장치이며, 그 응용범위는 전동칫솔용 충전기, 핸드폰용 충전기와 같은 소용량 시스템뿐만 아니라, 전기자동차, 산업용 이송장치, 철도 시스템과 같은 대용량 시스템에까지 확대되고 있다. 철도시스템과 같은 교통시스템에 적용되는 IPT 시스템의 경우, 소용량 시스템과 달리 큰 공극을 가지기 때문에 높은 에너지 전달 효율을 얻기 위하여 IPT 모듈의 주의 깊은 설계가 요구되기 때문에 본 논문에서는 철도차량에 적용하기 위한 U-U 타입 IPT와 U-I 타입 IPT의 등가회로 파라미터와 커플링 계수에 대한 특성을 해석적 방법을 통하여 분석하고, 실제 20[kW] 급 IPT 시제품 모듈의 실험을 통하여 등가회로 파라미터 검증 및 IPT 모듈의 효율 계측을 수행하였다.

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.777-782
• /
• 2014

Usually, railway axles are designed for infinite life based on endurance limit of the material and the axle is not fractured immediately when a surface crack initiated. The railway axles have been inspected regularly by NDT such as ultrasonic testing, magnetic testing and eddy current testing and so on. Because the axle failure is profoundly influenced by the probability of missing a fatigue crack during an NDT inspection, it is necessary to evaluate the Non Destructive Interval of railway axle. In the present paper, the Non Destructive Interval of railway axle based on fracture mechanics and finite element analysis was investigated. It was shown that the Non Destructive Interval of railway axle can be evaluated using fracture mechanics approach and extended using NDT which a crack can detect clearly.