• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.514-519
• /
• 2007

본 논문에서는 최근 IETF에서 표준화되고 있는 네트워크 기반 IPv6 이동성 프로토콜인 Proxy Mobile IPv6 (PMIPv6)를 IEEE 802.16e 네트워크에 적용할 때에 고속으로 핸드오버를 처리함과 동시에 패킷 버퍼링을 통하여 패킷의 손실과 순서의 어긋남 문제를 해결하여 단말 사용자가 서로 다른 IP 네트워크를 옮겨다니더라도 그에 따르는 패킷손실이나 세션 끊김 현상을 최소화하는 기법을 제안한다.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.583-584
• /
• 2008

This paper presents a low-power and high-speed pulsed flip-flop based on dual-precharging and conditional discharging. The dual-precharging operation minimizes the parasitic capacitance of each precharge node, resulting in high-speed operation. The conditional-discharging operation minimizes the redundant transitions of precharge nodes, resulting in low-power operation. Linear feedback shift register (LFSR) designed in a $0.18{\mu}m$ CMOS technology using the proposed flip-flop achieves 32% power reduction as compared to conventional design.

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.63-66
• /
• 1999

Echo and near-end crosstalk(NEXT) can be generated in two-wire duplex transmission. In this paper investigates how to cancel echoes of high speed communication. A pipeline algorithm is used to remove the echoes that high speed communication. It is least mean squared(LMS) algorithm based on the relaxed look-ahead concept, is focused on the pipelined LMS, and its performance is compared to that of the serial LMS algorithm. And we design pipelined adaptive filtering. In advanced of the hardware implementation with VHDL code the performance of pipelined LMS algorithm is verified by the computer simulation.

• Proceedings of the IEEK Conference
• /
• 2000.07a
• /
• pp.537-540
• /
• 2000

In this paper, we propose and design new architecture of the modified Banyan switch for a high speed networking and the high speed parallel computer. The proposed switching network with a remodeled architecture is a newly modified Banyan network with eight input and output ports. The switch scheme is that two packets may arrive on different inputs destined for the same output. We have analyzed the maximum throughput of the revised switch. The result of the analyses shows good agreement simulation and if we adopt such architecture of the revised model of the Banyan switch, the hardware complexity can be reduced. The FIFO discipline has increased about lloio when we compare the switching system with the input buffer system. We have designed and verified the switching system in VHDL.

• Journal of Communications and Networks
• /
• v.5 no.1
• /
• pp.25-32
• /
• 2003

4G mobile communication system requires the throughput of 10-100Mbps. Adaptive modulated OFDM system is promising technique for increasing the throughput. In the pilot symbol assisted high-speed packet transmission system, the data symbol duration is generally considered to be small compared to the coherence time. However, OFDM symbol duration is longer than the symbol duration of a single carrier system, so that the packet duration of the pilot symbol assisted high speed packet transmission system is long. In this case, the change of channel conditions is too fast to be accurately estimated by channel estimator at the receiver in high Doppler frequency, so that many errors occur during demodulation, especially with the data symbols at the end of each packet. In this paper, we consider the BER at various instantaneous $E_b/N_o$ that includes the demodulation errors in high Doppler frequency. When the coherence time is ten times longer than the duration of a single packet, the channel can be closely approximated as an AWGN channel. Otherwise, the approximation breaks down and the above-mentioned errors that occur during demodulation must be taken into consideration. In this paper, we propose the pilot symbol assisted high speed packet transmission system based on adaptive OFDM using a novel lookup table to consider the demodulated errors and evaluate the throughput performance.

• Proceedings of the KIEE Conference
• /
• 2002.04a
• /
• pp.79-81
• /
• 2002

This paper develops a adaptive fuzzy controller based fuzzy logic control for high performance speed controller in permanent magnet synchronous motor(PMSM) drives. In the proposed system, fuzzy control is used to implement the direct controller as well as the adaptation mechanism. The operation of the direct fuzzy controller and the fuzzy logic based adaptation mechanism is studied. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of error measured between the motor speed and output of a reference model. The control performance of the adaptive fuzzy controller is evaluated by simulation for various operating conditions. The validity of the proposed adaptive fuzzy controller is confirmed by performance results for PMSM drive system.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.1
• /
• pp.84-89
• /
• 2007

In order to design and test an SoC modem for high speed communication, the platform with the architecture of such high speed communication is needed. That platform is needed for testing large data in speed of 500Mbps. This paper shows that transmission data can be uploaded and downloaded by 250Mbps between a virtual modem target board and a PC through the AHB-PCI IP and the speed of based on DPRAM and PCI.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.8-11
• /
• 1986

Data acquisition system is needed in signal analysis and processing by using computer. This paper realizes the high speed data acquisition system by using 8bit, 20MHZ refresh A/D converter and 18 x 64 Byte high speed memory. The high speed data acquisition system provides converted data to IBM-PC XT micro computer.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.483-485
• /
• 1999

Recently, distributed control network system has been widely applied to on-board control system than conventional relay logic with control wire. This paper presents two configuration of driver's desk system using TCN(Train Communication Network). One is configured with TCN, the other is partial adoption of TCN.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.5
• /
• pp.1553-1558
• /
• 2000

The development of recent computer and communication technology has changed Automation System using communication network, and the new USB substituted with Serial Communication is already developed and now popular. In this paper, High speed data transfer system design using USB interface and communication application simulated for the situation is introduced. Base on USB, we can use additive function efficiently coped with former field device. The 'Winsock Connection USB Ternimal,' designed for hardware simulation, control the field device connected by USB, and provide the way for remote control of field device by Telnet connection through TCP/IP. That theorem can guarantee controlling direct input dta of user, and acuate function of field device using USB Packet Transmission. As a result of amy research, this communication application system identified good operation of field device with those of former field device. Another result of the experiment of hardware operation, we obtained accomplishment that the sufficient bandwidth guarantee of USB has high speed and high performance, and reduce the occupancy of system.