• FOCUS: LIFE SCIENCE
• /
• 제1호
• /
• pp.7.1-7.4
• /
• 2024

The document "Understanding the Relationship Between Particle Size, Performance, and Pressure" explores the impact of particle size on chromatographic performance and system pressure. The study highlights how smaller particles can improve separation efficiency by providing higher resolution and faster analysis times. However, this comes at the cost of increased backpressure, which can challenge the system's hardware and require higher operating pressures. The document discusses the balance needed between particle size, column dimensions, and system pressure to optimize performance without exceeding the pressure limits of chromatographic systems. It outlines the advantages of using superficially porous particles (SPPs) over fully porous particles (FPPs) in achieving high efficiency with lower backpressure. The study also emphasizes the importance of selecting appropriate column dimensions and flow rates to manage system pressure while maintaining optimal performance. In conclusion, understanding the interplay between particle size, performance, and pressure is crucial for optimizing chromatographic separations, ensuring system longevity, and achieving high-quality analytical results.

• 오토저널
• /
• 제3권2호
• /
• pp.18-26
• /
• 1981

The purpose of this paper is to study the possibility of practical use of gasoline-methanol mixed fuel as an alternative fuel of gasoline engines in the light of engine performances and harmful exhaust emissions as well as mixings and separations of the mixed fuels. When the methanol of 99.8% purity is mixed with super or regular gasoline available on the market today, the experimental results obtained without modifying carburetor in this study are as follows; 1.The separation ratio depends upon the gasoline-methanol mixing ratio only, regardless of fuel temperature and fuel additives for preventing separation of phase. 2.The critical absorption ratio is affected by the gasoline-methanol mixing ratio, its temperature and the quantity of fuel additives. 3.Concerning the distillation temperature, the initial point of all sorts of fuels is almost same,but 10% point and 35-60% point of mixed fuels are lower than those of gasoline only. 4.In case of throttle valve opening set, engine output using the mixed fuels is decreased compared to gasoline, but thermal efficiency is increased as a consequence of decreasing specific energy consumption. 5.In case of fixed load test, thermal efficiency is increased at low engine speed even under low part-load as well as under comparatively high part-load including full load. 6.CO and NOx emissions are reduced remarkably with the mixed fuels.

• 공업화학
• /
• 제25권2호
• /
• pp.157-160
• /
• 2014

폐 젤리충진 통신케이블로부터 고순도 구리회수를 위하여 실리콘계 및 톨루엔계 합성 열매유와 폐식용유를 사용하여 적용성을 평가하였다. 실리콘계 오일의 경우 모든 조건에서 분리효율이 낮은 반면, 톨루엔계 오일 및 폐식용유의 경우 처리온도 및 시간을 조절함에 따라 높은 분리효율을 얻을 수 있었다. 폐식용유를 사용하는 50 kg급 밀폐형 대용량 설비를 이용하여 $300^{\circ}C$에서 60 min 이상 처리할 경우 99.2% 이상의 고순도 구리와이어를 100% 회수할 수 있었다.

• 한국환경과학회지
• /
• 제19권1호
• /
• pp.89-96
• /
• 2010

The separation of $TiO_2$ wastewater carried out by an electrocoagulation/flotation process, which had various operating parameters. The effect of electrode material (aluminum and four dimensionally stable electrode), applied current (0.07~0.5 A), electrolyte concentration (0~1 g/L), solution pH (3~11), initial turbidity (1000~20000 NTU) and suspended solid concentration (5000~25000 mg/L) were evaluated. Turbidity removal efficiency of the soluble anode (aluminum), which could produce metal ions, was higher than that of the dimensionally stable electrode. Considering operation time, turbidity removal and electric power, optimum current was 0.19 A. The more NaCl dosage was high, the less electric power was required. However, optimum NaCl concentration was 0.125 g/L considered removal efficiency, operation time and cost. Initial $TiO_2$ concentration did not affected turbidity removal on the electrocoagulation/flotation operation. The electrocoagulation/flotation process was proved to be a very effective separation method in the removal of $TiO_2$ from wastewater.

• Applied Microscopy
• /
• 제50권
• /
• pp.17.1-17.9
• /
• 2020

Recent advances in fabrication have enabled radial-junction architectures for cost-effective and high-performance optoelectronic devices. Unlike a planar PN junction, a radial-junction geometry maximizes the optical interaction in the three-dimensional (3D) structures, while effectively extracting the generated carriers via the conformal PN junction. In this paper, we report characterizations of radial PN junctions that consist of p-type Si micropillars created by deep reactive-ion etching (DRIE) and an n-type layer formed by phosphorus gas diffusion. We use electron-beam induced current (EBIC) microscopy to access the 3D junction profile from the sidewall of the pillars. Our EBIC images reveal uniform PN junctions conformally constructed on the 3D pillar array. Based on Monte-Carlo simulations and EBIC modeling, we estimate local carrier separation/collection efficiency that reflects the quality of the PN junction. We find the EBIC efficiency of the pillar array increases with the incident electron beam energy, consistent with the EBIC behaviors observed in a high-quality planar PN junction. The magnitude of the EBIC efficiency of our pillar array is about 70% at 10 kV, slightly lower than that of the planar device (≈ 81%). We suggest that this reduction could be attributed to the unpassivated pillar surface and the unintended recombination centers in the pillar cores introduced during the DRIE processes. Our results support that the depth-dependent EBIC approach is ideally suitable for evaluating PN junctions formed on micro/nanostructured semiconductors with various geometry.

• 멤브레인
• /
• 제29권4호
• /
• pp.202-215
• /
• 2019

분자체 분리막은 분자크기의 기공을 갖는 다공성 분리막으로서 크기 또는 모양을 기반으로 혼합물을 분리하며, 높은 잠재적 에너지 효율과 뛰어난 분리능으로 많은 주목을 받아왔다. 그 중, 제올라이트 MFI 분리막은 가장 오랫동안 연구된 물질 중의 하나이며, 다양한 방면으로 개발된 기술들은 이후 다른 종류의 분자체 분리막 연구에도 많은 영향을 미쳤다. 본 총설에서는, 결정성 물질인 제올라이트 MFI의 결정 생성 및 성장을 제어하여 자일렌 이성질체 혼합물에 대한 분리막의 투과도와 선택도를 향상시킨 많은 방법들을 다룬다. 씨앗결정의 형태 제어, 결정의 효과적인 이차성장법, 씨앗결정의 코팅 방법, 결정의 방향성 제어, 이종원소 도입을 통한 결정구조의 유연성 제어, 결함 관리 등, 자일렌 이성질체 분리성능의 비약적 성능 향상을 가져온 기술들을 소개한다.

• 대한화학회지
• /
• 제46권5호
• /
• pp.412-429
• /
• 2002

(+)(18crown6)-tetracarboxylic acid ($18C6H_4$)를 퀴놀린계 항생제인 gemifloxacin을 모세관 전기영동법으로 키랄 분리하였다. Body fluid에서 퀴놀린계 항생제인 gemifloxacin의 직접적인 분석은 빠른 분석 시간, 다성분 분석등의 여러 가지 장점을 가진다. 그러나 Body fluid내의 높은 농도의 나트륨 이온은 $18C6H_4$와 강한 전하 상호작용으로 인하여 gemifoxacin과 $18C6H_4$의 상호작용을 방해한다. 키랄 선택제와 나트륨 이온 사이의 상호 작용을 줄이기 위해 완충 용액에 킬레이트 리간드 EDTA를 첨가하였다. 시료 용액에 150mM의 나트륨 이온이 존재 할 때에도 분리 효율의 향상과 이동 시간의 감소를 관찰 할 수 이었다.

• 한국의류학회지
• /
• 제23권1호
• /
• pp.120-127
• /
• 1999

The purpose of the study is to mae experimental whether the required property quantity and marker efficiency has variation of marking based on theoretical background of marking using th function of computer marking system. To investigate that variation of marking effect the required property quantity and marker efficiency as the following is tried to solve giving separation to item width of property cutting line detail which is believed to influence the required property quantity and marker efficiency. How to make experiment as follows separating in order marker of 1082 styles of women's ready-made clothes of with basic design(jacket. pants. skirt, two-piece). Then the data were subjected to analysis of variance and Duncan's multiple range test. The result of this studying as follows 1. In marker of women's jacket and pants the required property quantity shows lower when it is each item than when it is two-pice,. 2. In marker of women's pants marker efficiency shows the highest level when width is 132cm and it shows the lowest level when width is 112cm. 3. In width 152cm of skirt marker it has cutting lines shows lower the required property quantity than it doesn't have. 4. In marker of women's pants it has details shows more high marker efficiency than it doesn't have.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.733-736
• /
• 2002

The inside configuration of intake nozzle of vacuum cleaner greatly affects the dust-collection efficiency and acoustic-noise effect generated from flow separation Interaction between high-speed flow and internal structure. In order to improve the performance of the vacuum cleaner, flow fields inside the intake nozzles were investigated using flow visualization and FIV (Particle Image Vetocimetry) technique. The measurement to aerodynamic power, suction efficiency and noise level were also carried out. Valuable information was obtained from the experiments, revealing how to modify the intake nozzle. In this paper, the results of visualization, velocity distribution of flow fields, aerodynamic power, suction efficiency and noise level are discussed.

• Fisheries and Aquatic Sciences
• /
• 제17권3호
• /
• pp.339-344
• /
• 2014

PCR amplification with universal primer is a useful tool for speciation of symbionts in marine eukaryote coupled with robust separation method such as denaturing high performance chromatography (DHPLC). To overcome the biased amplification, clamping PCR is recommended to suppress the amplification of host gene. In this study, we evaluated the efficiency of rare gene detection for two kinds of clamping probes which were successfully utilized for eukaryotic symbiont analysis: C3 linked nucleotide (C3) and peptide nucleic acid (PNA). PNA was 3-4 orders of magnitude higher than that of C3 tested in clamping efficiency and rare gene detection. This represented that PNA could be a more competent clamping probe for the enhancement of PCR amplification for rare symbiont genes.