• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 E
• /
• pp.2192-2194
• /
• 1999

In this study, We have accomplished a new approach to develope a cheap and compact pulsed $CO_2$ laser system. We used a fast SCR as switching device instead of a thyatron in the pulsed power supply. Using the Pulse transformer, energy in the condenser is tranferred to the secondary, electrodes of discharge tube, from the primary. An axial and water cooled type was adopted as the laser cavity. The laser performance characteristics as various parameters, such as gas pressure and pulse repetition rate, have been investigated. As a result, the maxium laser output was 12.3[W] at a pulse repetition rate of 120[pps] and a filling pressure of 12[Torr].

• 한국가시화정보학회지
• /
• 제3권1호
• /
• pp.71-77
• /
• 2005

Information on temporal evolution of whole velocity fields are essential for physical understanding of a complicated turbulent flow. Due to advances of high-speed imaging technique, laser and electronics, high-speed digital cameras and high-repetition pulse lasers are commercially available in nowadays. A dynamic PIV system that can measure consecutive instantaneous velocity field with 1K$\times$ 1K pixels resolution at 1 fps was developed. It consists of a high-speed CMOS camera and a high-repetition Nd:YLF pulse laser. Theoretically, it can capture velocity fields at 20 fps with a reduced spatial resolution. In order to validate its performance, the dynamic PIV system was applied to a turbulent jet of which Reynolds number is about 3000. The particle images of 1024$\times$512 pixels were captured at a sampling rate of 4 KHz. The dynamic PIV system measured successfully the temporal evolution of instantaneous velocity fields of the turbulent jet, from which spectral analysis of turbulent structure was also feasible.

• Journal of Korean Vacuum Science & Technology
• /
• 제7권2호
• /
• pp.45-56
• /
• 2003

A high flux metal plasma pulse ion source, which can simultaneously perform ion implantation and deposition, was developed and tested to evaluate its performance using the prototype. Flux of ion source was measured to be 5 A and bi-polar pulse power supply with a peak voltage of 250 V, repetition of 20 Hz and width of 100 ${\mu}\textrm{s}$ has an output current of 2 kA and average power of 2 kW. Trigger power supply is a high voltage pulse generator producing a peak voltage of 12 kV, peak current of 50 A and repetition rate of 20 Hz. The acceleration column for providing target energy up to ion implantation is carefully designed and compatible with UHV (ultra high vacuum) application. Prototype systems including various ion sources are fabricated for the performance test in the vacuum and evaluated to be more competitive than the existing equipments through repeated deposition experiments.

• 전기학회논문지
• /
• 제64권5호
• /
• pp.746-750
• /
• 2015

In this paper, we propose a simulator to evaluate the performance of the semi-active laser guidance or the quadrant photodetector and to simulate the laser power reflected from a target. The laser pulse repetition frequency was generated and synchronized with the laser pulse repetition(PRF) code. To evaluate the performances of the proposed methods, we implemented a prototype system and performed experiments. As a result, the generated high voltage was variable in the range of DC 3V to 340V and has the rate of change of 2000 V/s. PRF code can be generated within 50ms ∼ 100ms and the error is implemented within 0.3ns. The laser output is synchronized with the PRF code and has a dynamic range of 23.6dB.

• Current Optics and Photonics
• /
• 제1권3호
• /
• pp.203-206
• /
• 2017

We report a passive Q-switching of an all-fiber erbium-doped fiber laser delivering high pulse energy by using a high quality single-walled carbon nanotube saturable absorber (SWCNT-SA). A side-polished fiber coated with the SWCNT is employed as an in-line SA for evanescent wave interaction between the incident light and the SWCNT. This lateral interaction scheme enables a stable Q-switched fiber laser that generates high pulse energy. The central wavelength of the Q-switched pulse laser was measured as 1560 nm. A repetition rate frequency of the Q-switched laser is controlled from 78 kHz to 190 kHz by adjusting the applied pump power from 124 mW to 790 mW. The variation of pulse energy from 51 nJ to 270 nJ is also observed as increasing the pump power. The pulse energy of 270 nJ achieved at maximum pump power is 3 times larger than those reported in Q-switched all-fiber lasers using a SWCNT-SA. The tunable behaviors in pulse duration, pulse repetition rate, and pulse energy as a function of pump power are reported, and are well matched with theoretical expectation.

• 한국염색가공학회지
• /
• 제16권6호
• /
• pp.16-22
• /
• 2004

This study was carried out to investigate K/S values, surface color, the fastness to washing, bacteria reduction rate of the silk and cotton fabrics dyed with Rhus verniciflua extract under the various dyeing conditions. The optimum dyeing temperature, dyeing time, dyeing pH and repetition of the silk fabrics dyed with Rhus verniciflua extract were $l00^{\circ}C, 30min., pH 5, five times repetition respectively, but in the cotton fabrics, it were $60^{\circ}C . 30min., pH 7, one times repetition. It were colored orangish Yellow in the silk fabrics and colored bright yellow in the cotton fabrics dyed with Rhus verniciflua extract. Surface color(munsell value) was not changed by the mordanting agents but those of the silk showed high tone when mordanting with stannous chloride, and it was decolored and darked when mordanting with ferric sulfate. The fastness to washing in the silk fabrics dyed with mordanting agents improved in 4～5 grade, but the cotton fabrics were 3～4 grade, so washing fastness of the silk and cotton fabrics were significantly improved when washing with the neutral detergent. The bacteria reduction rate of the silk fabrics increased drastically by dyeing of Rhus verniciflua extract.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.507-510
• /
• 2005

High voltage pulse power supply using Marx generator and solid-state switches is proposed in this study. The Marx generator is composed of 12 stages and each stage is made of IGBT stack, two diode stacks, and capacitor. To charge the capacitors of each stage in parallel, inductive charging method is used and this method results in high efficiency and high repetition rates. It can generate the pulse voltage with the following parameters: Voltage: up to 120kv Rising time: sub ${\mu}S$ Pulse width: up to $10{\mu}S$, Pulse repetition rate: 1000pps The proposed pulsed power generator uses IGBT stack with a simple driver and has modular design. So this system structure gives compactness and easiness to implement total system. Some experimental results are included to verify the system performances in this paper.

• 한국지반환경공학회 논문집
• /
• 제10권1호
• /
• pp.43-48
• /
• 2009

본 연구에서는 소규모 처리공법으로서 질소와 인을 효율적으로 제거할 수 있으며, 관리 및 운전이 용이한 연속회분식반응조(SBR)공정의 영양염류 제거특성에 대하여 연구하였다. 특히, 질소의 탈질 및 인의 과잉섭취에 영향을 미치는, 무산소구간의 반복횟수에 따라 변화하는 용존산소, COD, 질소 및 인의 반응특성을 파악하여 SBR공정의 무산소-호기 구간반복에 따른 운전특성을 파악하고자 하였다. 이에 호기-무산소구간을 1~4회 반복하여 Run 1~4의 실험을 수행한 결과, 무산소구간의 반복횟수가 많아질수록 탈질을 위한 낮은 용존산소 유지가 어려운 것으로 나타났다. COD 제거율의 경우 운전에 상관없이 모두 91% 이상의 양호한 결과를 나타냈으나, 추가적인 무산소구간이 없을 때 효율이 약간 더 우수하였다. 질소제거에 있어서는 무산소구간이 2회 및 3회 반복되었을 때 약 68%의 높은 제거율을 나타냈으며, 배출되는 질소의 구성은 99% 이상이 $NOX^--N$ 이었다. 인 제거에 있어서는 무산소구간이 1회~3회 반복되었을 때 약 40%의 양호한 제거효율을 나타냈다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1574-1575
• /
• 2011

The application of a pulsed power system is being extended to an environmental and industrial field. The non-destructive gaseous pollutants from industrial plants such as power generation plants and incinerators can be processed by applying high voltage pulses with a fast rising time (a few nanoseconds) and short duration (nano to microseconds) in a pulsed corona discharge reactor. The pulsed plasma generator with a triggered switch has been developed. Its corona current in load can be adjusted by applied voltage and repetition rate. We investigated the performance of the pulsed plasma generator by analyzing the concentration of ozone in small reactor. This paper describes the electrical characteristics of the pulse generator with a voltage of 30 kV at repetition rate of 50 PPS. In addition, we briefly discuss a configuration of the system and initial test results.

• Journal of Power Electronics
• /
• 제11권4호
• /
• pp.612-619
• /
• 2011

This paper presents a water treatment system for leachate from sewage-filled ground that uses a pulsed-power modulator developed based on semiconductor switches in order to realize a long life, a high repetition rate, and a fast rising time. The specifications of the developed pulsed-power modulator are the pulsed output voltage, the output current, the pulse repetition rate (PRR), the pulse width, and an average output power of $60\;kV_{max}$, $300\;A_{max}$, 3000, $50\;{\mu}s$, and 15 kW, respectively. The pulsed-power water treatment system was introduced and analyzed using an equivalent electrical circuit model to optimize the output voltage waveform. The experimental results verify that the proposed water treatment system can be effectively used for industrial applications.