• Proceedings of the KIEE Conference
• /
• 1996.11a
• /
• pp.434-436
• /
• 1996

This paper deals with the signal communication system for MAGLEV which is indispensible to train control with safety and high speed operation. Therefore it is necessary for signal system to ensure high speed transmission. massive transmission, low error rate, and reliability of information. And the ensured information should be transmitted between ground and on-board for safety and high speed operation. For these reasons, we have considered the guaranteed reliability by applying FSK method and HDLC protocol. Because HDLC has the advantages of high efficiency, high reliability, low bit rate, and bit transparency. HDLC is the appropriate method for data transmission in MAGLEV.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.320-323
• /
• 2005

This paper discusses heat problem of IC, which composes the electronic instruments, to guarantee reliability of electronic instruments. And also proposes the unified equivalent model for various electronic instrument products to guarantee reliability and life of its parts. Because electronic instruments are down sizing and operated with high frequency, the internal temperature of electronic instruments is rising steadily. The internal temperature of the electronic instruments gives a big effect to electronic instrument's reliability and life. The semiconductor parts are the representative heat generation parts because of its complicated function, high frequency and high density. Consequently, guaranteeing reliability and life of electronic semiconductor is the important start point in securing the reliability and life of the electronic instrument product. Unfortunately, there are many factors, which affect heat dissipation efficiency. The heat dissipation efficiency follows the environment where the electronic instrument products are used. Therefore it is very difficult to define reliability and life of the electronic manufactures. Electronic instrument products are composed of printed circuit board (PCB), integrated circuit (IC), resistance, and capacitor and so on. And there are superposed thermal resistances, because the parts are arrayed on the printed circuit board (PCB), Therefore the total thermal resistance is variable. Consequently it cannot have same thermal model for each electronic instrument products. In the next part, we propose the unified equivalent model for various electronic instruments. And using the proposed equivalent model proofs the method for analysis reliability of electronic parts.

• Journal of the Korean Society for Railway
• /
• v.9 no.5 s.36
• /
• pp.601-605
• /
• 2006

Reliability of the Railway signaling system which is safety critical is determined by reliability of hardware and software. Reliability of hardware is easily predicted and demonstrated through lots of different studies and environmental tests, while that of software is estimated by the iterative test outcomes so estimates of reliability will depend on the inputs. Combinations of inputs to and outputs from the software may be mostly combinatoric and therefore all the combinations could not be tested. As a result, it has been more important to calculate reliability by means of a simpler method. This paper identifies the reliability prediction equation applicable to reliability prediction for railway signaling system software, and performs the simulation of onboard equipment of automatic train control for high speed train to review reliability prediction and validity.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.11
• /
• pp.1082-1089
• /
• 2011

Most engineered systems are designed with high levels of system redundancies to satisfy required reliability requirements under adverse events, resulting in high systems' LCCs (Life-Cycle Costs). Recent years have seen a surge of interest and tremendous advance in PHM (Prognostics and Health Management) methods that detect, diagnose, and predict the effects of adverse events. The PHM methods enable proactive maintenance decisions, giving rise to adaptive reliability. In this paper, we present a RAP (Resilience Allocation Problem) whose goal is to allocate reliability and PHM efficiency to components in an engineering context. The optimally allocated reliability and PHM efficiency levels serve as the design specifications for the system RBDO (Reliability-Based Design Optimization) and the system PHM design, which can be used to derive the detailed design of components and PHM units. The RAP is demonstrated using a simplified aircraft control actuator design problem resulting in a highly resilient actuator with optimally allocated reliability, PHM efficiency and redundancy for the given parameter settings.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.1
• /
• pp.102-109
• /
• 2014

The purpose of this study is to analyze collaborative relationship between members of a building construction organization. For the analysis of collaborative relationship, this researcher collected data by conducting a questionnaire survey with members of three large building construction organizations for apartment housing. The analyzed contents of collaborative relationship were the 'frequency of communication between organizational members' and their 'reliability'. According to the analysis of communication network, construction managers had low frequency of communication, whereas those responsible for each area, like construction deputy managers, had high frequency of communication. It indicates that middle managers are at the center of communication related to construction work in construction organizations. According to the analysis of reliability network, construction managers showed highest reliability, and employees at the top level in an organizational map also showed high reliability. Since they generally have a lot of experience, are some older of age, and assume responsibility for work, they are considered to receive reliability from other organizational members. This study proved that it was possible to numerically express reliability of organizational members, which is an abstract concept, and analyze it. Therefore, it is expected that the analysis result will highly be likely to be used in the area of construction management.

• Journal of Welding and Joining
• /
• v.35 no.3
• /
• pp.15-20
• /
• 2017

In this paper, two types of assemblies using CNT-filled SACAs (with 0.03 wt% CNTs and without CNT) were prepared to investigate the influence of carbon nanotubes (CNTs) on the reliability properties of solderable anisotropic conductive adhesives (SACAs) with a low-melting-point alloy (LMPA). Two types of reliability test including thermal shock (TS: -55 to $125^{\circ}C$, 1000 cycles) and high-temperature and high-humidity (HTHH: $85^{\circ}C$, 85% RH, 1000 h) tests were conducted. The SACA assemblies with and without CNTs showed stable electrical reliability properties due to the formation of wide and stable metallurgical interconnection between corresponding metallizations by the molten LMPA fillers. Although the mechanical pull strength of CNT-filled SACA assemblies was decreased after thermal aging (because of the excessive layer growth and planarization of the IMCs), the CNT-filled SACA with 0.03wt% CNTs showed enhanced mechanical reliability properties compared with the SACA assemblies no CNTs. This enhancement in mechanical performance was due to the reinforcement effect of the CNTs. These results demonstrate that CNTs within the CNT-filled SACAs can improve the reliability properties of CNT-filled SACAs joints due to their superior physical properties.

• Journal of Korean Academy of Nursing
• /
• v.38 no.3
• /
• pp.474-482
• /
• 2008

Purpose: The purposes of this study were; 1) to test the validity and reliability of the Korean version of Rantz's Observable Indicators of Nursing Home Care Quality Instrument (ONHQ) and 2) to evaluate the quality of Korean nursing homes. Methods: The study employed a three-phase methodological research design. 1) The original instrument of Rantz's. ONHQ was translated into Korean and modified by Korean nursing home experts. 2) A pilot study using the modified instrument was done in 20 nursing homes to examine inter-rater reliability. 3) The validity and reliability were tested.in 98 nursing homes. Results: Seven factors were extracted through factor analysis: 'communication', 'care delivery', 'grooming', 'odor, 'environment-basics', 'environment-access', and 'environment-homelike'. These factors explained 86.07% of the total variance. Cronbach's alpha coefficient of the 30 items was .97 indicating a high internal consistency of the instrument. Inter-rater reliability according to Kappa was .82. The average score of nursing home quality was 112.07 indicating an average range of quality level. Conclusion: The Korean version of the ONHQ was identified as a tool with a high degree of validity and reliability. This tool can be effectively used to assess the quality of nursing homes by professions as well as family members.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2004.04a
• /
• pp.85-89
• /
• 2004

This brief paper is an application of HALT(High Accelerated Life Test) and FA(Failure analysis) to improvement of STN LCD module. Before HALT the result of environmental test is good. So, we choose the technique of HALT to evaluate reliability. After HALT and Fa, we suggest some methods to improve reliability

• Journal of Fashion Business
• /
• v.23 no.6
• /
• pp.49-63
• /
• 2019

The purpose of this study was to determine the satisfaction, trust and word-of-mouth intention of online information according to the type of information search by female cosmetics consumers in their 20's to 40's. For this study, online and offline surveys were conducted by 307 people. Factor, correlation, and multiple regression analysis were used to analyze the data. The main results are summarized as follows. First, the cosmetic consumer's information search types were identified as active, playful, and economic information search types. Second, the results of examinations on the effect of consumer information search types on satisfaction, reliability, and word-of-mouth intention of the online information searches showed that the active information search type had a positive effect on satisfaction, reliability, and word-of-mouth intention. The economic information search type had a positive effect on satisfaction. The active information search type was confirmed to have high satisfaction, reliability, and word-of-mouth intention for the provided information and thus, the acceptance of the provided information was high. The playful information search type was divided into continuous, habitual, and independent information search and a tendency to assign a low value to consumer information was confirmed. The economic information search type showed high satisfaction with the information obtained by searching, but also a passive attitude toward trust or word-of-mouth intention and was categorized as a passive search type. Online information search is a communication channel with a great influence that can provide various benefits to cosmetic consumers.

• Journal of Korean Physical Therapy Science
• /
• v.26 no.1
• /
• pp.9-14
• /
• 2019

Background: Pes planus, or flat foot, causes lower limb malalignment and foot pain during walking or exercise. Therefore, a highly reliable evaluation method to accurately diagnose flat feet is necessary. This study investigated the intra-and inter-rater reliability of the navicular drop test in different postures. Design: Cross sectional study. Methods: Forty healthy volunteers performed the navicular drop test in three different combinations of non-weight-bearing and weight-bearing postures (standing/standing, sitting/sitting, and sitting/standing). Two examiners alternately performed the measurements five times in each subject, and in each posture. Significant differences in measurements were obtained among the three postures, with the highest navicular drop being observed in the sitting/standing posture. Results: Inter-rater reliability was high in the sitting/standing and sitting/sitting postures. Intra-rater reliability was high in all three postures. In the sitting/sitting and sitting/standing postures, large navicular drop values and high inter- and intra-rater reliability were observed. Conclusion: Therefore, the sitting/standing and sitting/sitting postures are recommended for use in navicular drop tests to diagnose flat feet.