• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.4
• /
• pp.271-276
• /
• 2017

Waterlogging strongly affects maize (Zea mays L.) growth. It is necessary to find the screening method of waterlogging tolerant maize lines. This study was to investigate the growth characters at V3 stage of maize, when is very sensitive to waterlogging. Six Korean maize inbred lines were subjected to waterlogging at V3 stage for 30 days. The 30 days waterlogging treatment significantly reduced plant height, number of expanded leaves, and SPAD value, compared with the control plants. SPAD values were significantly different among the six inbred lines, KS140 was the highest. The dry matter accumulation of aerial and root part were significantly decreased by 30 days waterlogging. KS140 was the weightiest among inbred lines. The dry matter of adventitious root showed same trend. Waterlogging treatment significantly reduced to ear length and thickness, grains filling length, grain number per ear, and maize grain. Plant height, SPAD value, and number of fully-expanded leave showed high correlation with maize grain yield, but number of senescent leaves, dry matter of adventitious root and TR ratio did not, suggesting that the former three traits may be good indicator for evaluating 30-day waterlogging tolerance of maize inbred lines. KS164 was the highest yield by increasing of grains filling length and grain number per ear of among waterlogging inbred lines. According to the results, evaluation of maize waterlogging should be consider both early growth characteristics and resilience in the later growth stages.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.13 no.3
• /
• pp.151-164
• /
• 2010

Field observations on the seasonal variations of environmental factors and phytoplankton community were carried out four times at 30 stations in the narrow strait between Yeosu and Dolsan Island of the Korean South Sea from September 2005 to May 2006. The ranges of water temperature, salinity and extinction coefficient in the surface waters were 5.6~26.3, 25.36~33.92 psu and 0.13~2.13, respectively. The water temperature measured higher at Gamak Bay in summer and spring. It measured higher at Yeosuhae Bay in autumn and winter. Salinity showed uniformity of distributions in almost all areas, except for an area near a sewage disposal outlet. Extinction coefficient indicated that the turbidity of Gamak Bay and the area near the sewage disposal outlet were higher than that of the Yeosuhae Bay. In the phytoplankton community were identified a total of 99 species belonging to 51 genera. The species composition showed itself to be various in summer and autumn, but poor in winter and spring with a high ratio of centric diatoms all the year round. Seasonal succession of dominant species were Skeletonema costatum and Chaetoceros curvisetus in summer, Eucampia zodiacus in autumn and winter, and Chaetoceros affinis and Thalassionema nitzschioides inspring. Standing crops of phytoplankton and Chlorophyll $\alpha$ concentration were greatly higher at Gamak Bay in summer with ranges of $0.2{\times}10^4\;cells\;L^{-1}$ to $296{\times}10^4\;L^{-1}$, and $1.94\;L^{-1}$ to $22.12\;L^{-1}$, respectively. From the results of principal component analysis (PCA), the northern part of Dolsan Island was divided into two or three regions from the characteristics of marine environment and phytoplankton community.

• Development and Reproduction
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2001

Predetermination of sex in livestock of offpring is in great demand and is of critical importance to providing for the most efficient production of the animal ariculture. Such a sexing techlology would also enhance the economy of conventional artificial insemination(AI) and aid the porcine industry. The purpose of this study was to evaluate the efficiency of enriching X-bearing porcine sperm using discontinuous percoll gradients and PCR mefhod. Semen was collected from mature boars of proven fertility center (AI center KimHae). Sperm was leaded on the isotonic discontinuous percoll gradient and then it was centrifuged at 120 ${\times}$ g for 20 minutes. After centrifugation, sperm included in each fraction were recovered (7${\times}$10$^6$ sperms/ml) and then sperm genomic DNA was extractedfor the PCR. SRY gene was used to evaluate the ratio between X and Y sperm in the separated fractions. Ju viro ffrtilization wascarried out by adding the unseparated sperm (control) or separated (experimental poop) to the matured oocytes in TCM-199. Embryos for sex determination were obtained at 2 cell stage and then was used for SRY gene amplification. After centrifugation of discontinuous percoll gradient, the most motile sperm was obtained at 95% fiaction (94.4% ${\pm}$ 5.1%, p < 0.01). The PCR analysis evaluated that 30%, 50% and 65% fractions were Y sperm rich, whereas 80% and 95% fractions were X sperm rich. PCR analysis with each porcineembryo showed that 33.3% of control and 66.7% of experimental group were determined as female embryos. In conclusion, in vitro matured oocytes inseminated with sperms (95% fraction) prepared by percoll gradient centrifugation showed high fertilization rates and female embryos than control sperms.

• Economic and Environmental Geology
• /
• v.34 no.6
• /
• pp.507-522
• /
• 2001

At the Tongyeong mine, quartz, rhodochrosite (kutnahorite), muscovite, illite, pyrite, galena, chalcopyrite. sphalerite, acanthite, and hessite are the principal vein minerals. They were deposited under epithermal conditions in two stages. Ore mineral assemblages and associated gangue phases in stage can be clearly divided into two general associations: an early cycle (band) that appeared with introduction of most of the sulfides and electrum, and a later cycle in which base metal and carbonate-bearing assemblages (mostly rhodochrosite) became dominant. Tellurides and some electrum occur as small rounded grains within subhedral-to euhedral pyrite or anhedral galena in stageII. Sulfide mineralization is zoned from pyrite to galena and sphalerite. We have used computer modeling to simulate formation of four stages of vein genesis. The reaction of a single fluid with andesite host rock at 28$0^{\circ}C$, isobaric cooling of a single fluid from 26$0^{\circ}C$ to 12$0^{\circ}C$, and boiling and mixing of a fluid with both decreasing pressure and temperature were studied using the CHILLER program. Calculations show that the precipitation of alteration minerals is due to fluid-andesite interaction as temperature drops. Speciation calculations confirm that the hydrothermal fluids with moderately high salinities and pH 5.7 (acid), were capable of transporting significant quantities of base metals. The abundance of gold in fluid depends critically on the ratio of total base metals and iron to sulfide in the aqueous phase because gold is transported as an Au(HS)$_2$- complex, which is sensitive to sulfide activity. Modeling results for Tongyeong mineralization show strong influence of shallow hydrogenic processes such as boiling and fluid mixing. The variable handing in stageII mineralization is best explained by maltiple boilings of hydrothermal fluid followed by lateral mixing of the fluid with overlying diluted, steam-heated ground water. The degree of similarity of calculated mineral assemblages and observed electrum composition and field relationships shows the utility of the numerical simulation method in identifying chemical processes that accompany boiling and mixing in Te-bearing Au-Ag system. This has been applied in models to narrow the search area for epithermal ores.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.35-61
• /
• 1978

To find out the power tiller's travel and tractive characteristics on the general slope land, the tractive p:nver transmitting system was divided into the internal an,~ external power transmission systems. The performance of power tiller's engine which is the initial unit of internal transmission system was tested. In addition, the mathematical model for the tractive force of driving wheel which is the initial unit of external transmission system, was derived by energy and force balance. An analytical solution of performed for tractive forces was determined by use of the model through the digital computer programme. To justify the reliability of the theoretical value, the draft force was measured by the strain gauge system on the general slope land and compared with theoretical values. The results of the analytical and experimental performance of power tiller on the field may be summarized as follows; (1) The mathematical equation of rolIing resistance was derived as $$Rh=\frac {W_z-AC \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\] sin\theta_1}} {tan\phi \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]+\frac{tan\theta_1}{1}$$ and angle of rolling resistance as $$\theta _1 - tan^1\[ \frac {2T(AcrS_0 - T)+\sqrt (T-AcrS_0)^2(2T)^2-4(T^2-W_2^2r^2)\times (T-AcrS_0)^2 W_z^2r^2S_0^2tan^2\phi} {2(T^2-W_z^2r^2)S_0tan\phi}\] $$and the equation of frft force was derived as$$P=(AC+Rtan\phi)\[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]cos\phi_1 \ulcorner \frac {W_z \ulcorner{AC\[ [1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]sin\phi_1 {tan\phi[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\]+ \frac {tan\phi_1} { 1} \ulcorner W_1sin\alpha $$The slip coefficient K in these equations was fitted to approximately 1. 5 on the level lands and 2 on the slope land. (2) The coefficient of rolling resistance Rn was increased with increasing slip percent 5 and did not influenced by the angle of slope land. The angle of rolling resistance Ol was increasing sinkage Z of driving wheel. The value of Ol was found to be within the limits of Ol =2\ulcorner "'16\ulcorner. (3) The vertical weight transfered to power tiller on general slope land can be estim ated by use of th~ derived equation: $$R_pz= \frac {\sum_{i=1}^{4}{W_i}} {l_T} { (l_T-l) cos\alpha cos\beta \ulcorner \bar(h) sin \alpha - W_1 cos\alpha cos\beta$$The vertical transfer weight $R_pz$ was decreased with increasing the angle of slope land. The ratio of weight difference of right and left driving wheel on slop eland,$\lambda= \frac { {W_L_Z} - {W_R_Z}} {W_Z} $, was increased from ,$\lambda$=0 to$\lambda$=0.4 with increasing the angle of side slope land ($\beta = 0^\circ~20^\circ) (4) In case of no draft resistance, the difference between the travelling velocities on the level and the slope land was very small to give 0.5m/sec, in which the travelling velocity on the general slope land was decreased in curvilinear trend as the draft load increased. The decreasing rate of travelling velocity by the increase of side slope angle was less than that by the increase of hill slope angle a, (5) Rate of side slip by the side slope angle was defined as $ S_r=\frac {S_s}{l_s} \times$ 100( %), and the rate of side slip of the low travelling velocity was larger than that of the high travelling velocity. (6) Draft forces of power tiller did not affect by the angular velocity of driving wheel, and maximum draft coefficient occurred at slip percent of S=60% and the maximum draft power efficiency occurred at slip percent of S=30%. The maximum draft coefficient occurred at slip percent of S=60% on the side slope land, and the draft coefficent was nearly constant regardless of the side slope angle on the hill slope land. The maximum draft coefficient occurred at slip perecent of S=65% and it was decreased with increasing hill slope angle $\alpha$. The maximum draft power efficiency occurred at S=30 % on the general slope land. Therefore, it would be reasonable to have the draft operation at slip percent of S=30% on the general slope land. (7) The portions of the power supplied by the engine of the power tiller which were used as the source of draft power were 46.7% on the concrete road, 26.7% on the level land, and 13~20%; on the general slope land ($\alpha = O~ 15^\circ ,\beta = 0 ~ 10^\circ$) , respectively. Therefore, it may be desirable to develope the new mechanism of the external pO'wer transmitting system for the general slope land to improved its performance.l slope land to improved its performance.

• Journal of Biosystems Engineering
• /
• v.3 no.2
• /
• pp.34-34
• /
• 1978

To find out the power tiller's travel and tractive characteristics on the general slope land, the tractive p:nver transmitting system was divided into the internal an,~ external power transmission systems. The performance of power tiller's engine which is the initial unit of internal transmission system was tested. In addition, the mathematical model for the tractive force of driving wheel which is the initial unit of external transmission system, was derived by energy and force balance. An analytical solution of performed for tractive forces was determined by use of the model through the digital computer programme. To justify the reliability of the theoretical value, the draft force was measured by the strain gauge system on the general slope land and compared with theoretical values. The results of the analytical and experimental performance of power tiller on the field may be summarized as follows; (1) The mathematical equation of rolIing resistance was derived as $$Rh=\frac {W_z-AC \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\] sin\theta_1}} {tan\phi \[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]+\frac{tan\theta_1}{1}$$ and angle of rolling resistance as $$\theta _1 - tan^1\[ \frac {2T(AcrS_0 - T)+\sqrt (T-AcrS_0)^2(2T)^2-4(T^2-W_2^2r^2)\times (T-AcrS_0)^2 W_z^2r^2S_0^2tan^2\phi} {2(T^2-W_z^2r^2)S_0tan\phi}\] $$and the equation of frft force was derived as$$P=(AC+Rtan\phi)\[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]cos\phi_1 ? \frac {W_z ?{AC\[ [1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\)\]sin\phi_1 {tan\phi[1+ \frac{sl}{K} \(\varrho ^{-\frac{sl}{K}-1\]+ \frac {tan\phi_1} { 1} ? W_1sin\alpha $$The slip coefficient K in these equations was fitted to approximately 1. 5 on the level lands and 2 on the slope land. (2) The coefficient of rolling resistance Rn was increased with increasing slip percent 5 and did not influenced by the angle of slope land. The angle of rolling resistance Ol was increasing sinkage Z of driving wheel. The value of Ol was found to be within the limits of Ol =2? "'16?. (3) The vertical weight transfered to power tiller on general slope land can be estim ated by use of th~ derived equation: $$R_pz= \frac {\sum_{i=1}^{4}{W_i}} {l_T} { (l_T-l) cos\alpha cos\beta ? \bar(h) sin \alpha - W_1 cos\alpha cos\beta$$The vertical transfer weight $R_pz$ was decreased with increasing the angle of slope land. The ratio of weight difference of right and left driving wheel on slop eland,$\lambda= \frac { {W_L_Z} - {W_R_Z}} {W_Z} $, was increased from ,$\lambda$=0 to$\lambda$=0.4 with increasing the angle of side slope land ($\beta = 0^\circ~20^\circ) (4) In case of no draft resistance, the difference between the travelling velocities on the level and the slope land was very small to give 0.5m/sec, in which the travelling velocity on the general slope land was decreased in curvilinear trend as the draft load increased. The decreasing rate of travelling velocity by the increase of side slope angle was less than that by the increase of hill slope angle a, (5) Rate of side slip by the side slope angle was defined as $ S_r=\frac {S_s}{l_s} \times$ 100( %), and the rate of side slip of the low travelling velocity was larger than that of the high travelling velocity. (6) Draft forces of power tiller did not affect by the angular velocity of driving wheel, and maximum draft coefficient occurred at slip percent of S=60% and the maximum draft power efficiency occurred at slip percent of S=30%. The maximum draft coefficient occurred at slip percent of S=60% on the side slope land, and the draft coefficent was nearly constant regardless of the side slope angle on the hill slope land. The maximum draft coefficient occurred at slip perecent of S=65% and it was decreased with increasing hill slope angle $\alpha$. The maximum draft power efficiency occurred at S=30 % on the general slope land. Therefore, it would be reasonable to have the draft operation at slip percent of S=30% on the general slope land. (7) The portions of the power supplied by the engine of the power tiller which were used as the source of draft power were 46.7% on the concrete road, 26.7% on the level land, and 13~20%; on the general slope land ($\alpha = O~ 15^\circ ,\beta = 0 ~ 10^\circ$) , respectively. Therefore, it may be desirable to develope the new mechanism of the external pO'wer transmitting system for the general slope land to improved its performance.

• Journal of Animal Science and Technology
• /
• v.48 no.5
• /
• pp.727-738
• /
• 2006

This study was carried out to investigate the effect of feeding levels and periods of Rhus verniciflua Stokes (RVS) on the quality of M. longissimus from gilts (Landrace×Yorkshire×Duroc) at finishing stage. The gilts were fed diets containing 0 (control), 2 and 4% RVS for 5 weeks (the latter feeding periods) and 8 weeks (the first feeding periods+the latter feeding periods) before slaughtering, respectively. Samples were stored at 3±0.2℃ for 8 days. Crude fat content was decreased by feeding diets of 4% RVS (p<0.05). Water-holding capacity (WHC) was higher in RVS treatments than in control during storage (p<0.05). L*(Lightness) value was higher in 5 weeks-RVS treatment than in control during storage (p<0.05). a*(Redness) and b*(yellowness) were not affected by the levels and periods of RVS supplementation. Thiobarbituric acid reactive substances (TBARS) value was lower in RVS treatment than in control (p<0.05), and the 5 weeks with 4% RVS treatment showed the highest antioxidative activity. Fatty acid compositions of pork were changed by RVS feeding levels and periods. The meat supplemented with RVS showed high levels of unsaturated fatty acid (UFA) composition and monounsaturated fatty acid (MUFA)/saturated fatty acid (SFA) ratio compared with control. The dietary 8 weeks-RVS treatments had lower stearic acid(18:0) and higher polyunsaturated fatty acid (PUFA) contents than in other treatments. Melting point of backfat also decreased by increasing the level and period of RVS supplementation (p<0.05). Therefore, RVS fed pork decreased fat content and melting point, increased WHC and UFA composition, and delayed lipid oxidation during storage.

• Korean Journal of Environmental Agriculture
• /
• v.31 no.1
• /
• pp.37-44
• /
• 2012

BACKGROUND: Many edible mushrooms are known to accumulate high levels of heavy metals. This research was focused on health risk assessment to investigate the mushrooms in Korea, arsenic (As), cadmium (Cd), lead (Pb) and mercury (Hg) contaminations in edible mushrooms in cultivated areas were investigated, and health risk was assessed through dietary intake of mushrooms. METHODS AND RESULTS: The heavy metals in mushrooms were analyzed by ICP/MS after acid digestion. Probabilistic health risk were estimated by Monte-Carlo simulation techniques. The average contents of As, Cd, Pb, and Hg were $0.035{\pm}0.042$ mg/kg, $0.017{\pm}0.020$ mg/kg, $0.043{\pm}0.013$ mg/kg, and $0.004{\pm}0.004$ mg/kg, respectively. The results showed that contents of Cd and Pb did not exceed maximum residual levels established by European Uion regulation (Cd 0.20 mg/kg and Pb 0.30 mg/kg). For health risk assessment, estimated intakes in all age populations did not exceed the provisional tolerable daily intake of As and Hg, provisional tolerable monthly intake of Cd, provisional tolerable weekly intake of Pb. The Hazard Index (HI) were ranged from $0.03{\times}10^{-4}{\sim}0.01{\times}10^{-3}$ for As, $0.02{\times}10^{-3}{\sim}0.81{\times}10^{-3}$ for Cd, $0.06{\times}10^{-3}{\sim}0.38{\times}10^{-3}$ for Pb, and $0.08{\times}10^{-4}{\sim}0.14{\times}10^{-3}$ for Hg at general population. CONCLUSION: The HI from the ratio analysis between daily exposure and safety level values was less than 1.0. This results demonstrated that human exposure to heavy metals through dietary intake of mushrooms might not cause adverse effect.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.28 no.2
• /
• pp.139-154
• /
• 2008

The nearly 75% of animal feed materials used for livestock production are imported every year in Korea. Most of imported feed ingredients are concentrated feeds such as com, wheat, soybean, soybean meal, etc. and they are used as the source materials for the production of assorted feed. The imported concentrated feeds are high in nitrogen and phosphorus. Therefore, the consistent import of feed ingredients may cause an increase of nutrient deposit in our agricultural ecosystem. In the current review, it was discussed with the situation of the feed importation and its nutritional composition to evaluate the nutrient load by the imported feeds onto agricultural ecosystem. The nutrient load caused by imported feeds in agricultural environment was compared with the nutrient demand for crop production. The amounts of N, $P_2O_5\;and\;K_2O$ introduced by the imported fteds in Korea were 371, 140 and 143 Ktons. And, the N, $P_2O_5\;and\;K_2O$ loads excreted from imported feeds in livestock were 148, 84 and 86 Ktons of N, $P_2O_5\;and\;K_2O$ and These nutrient loads by the imported feeds are at the percentage of N 52%, $P_2O_5$ 52% and $K_2O$ 42% in the comparison of total nutrient amounts excreted from livestock animals in Korea. The 82.3% of nutrients excreted from livestock was recycled to crop land as compost and liquid fertilizer, and the others were discharged to river after water treatment processing or disposed to ocean. Also, passing through the recycling process far the production of compost and liquid fertilizer, the amount of nutrients was reduced by the ammonia vaporization of livestock feces and urine. Accordingly, N 81, $P_2O_5$ 74 and $K_2O$ 76 Ktons in the nutrients excreted from livestock were estimated to be utilized in the crop land. Consequently, it was estimated that 44, 48 and 69 Ktons of N, $P_2O_5\;and\;K_2O$ were taken up with crops in the consideration of the ratio of mineralization, and the amounts of leached or deposited N, $P_2O_5\;and\;K_2O$ in crop land were estimated to be 37, 27 and 7 Ktons, respectively. It is estimated that 12%, 34% and 48% of N, $P_2O_5\;and\;K_2O$ introduced by the imported feeds were used by crops, and 10%, 34% and 5% of N, $P_2O_5\;and\;K_2O$ were leached or deposited in agricultural ecosystem. Therefore, considering the leached and deposited amounts of N, $P_2O_5\;and\;K_2O$ originated from the imported feed ingredients, the consistent import of feeds may gradually increase the nutrient load onto agricultural ecosystem.

• Journal of Food Hygiene and Safety
• /
• v.22 no.1
• /
• pp.29-36
• /
• 2007

The using frequency of processed foods and dietician's perception against management of food service at 98 food service institutions located in Jeollabuk-Do were surveyed. Food service institutions included 13 hospitals,38 schools,40 enterprises, and 7 others. Single menu (75.5%) with two (33.7%) or three (57.1%) side dish was offered. In addition, the offering ratio of boiled water and spring water was 37.8 and 32.7%, respectively. The processed foods with high using frequency were kochujang (1.19), sesame oil (1.22), and doenjang (1.30), but that of leek, onion, Chinese cabbage, and radish were 4.95, 4.62, 4.60, and 4.26, respectively. Dietician's major affairs in all type of food service institutions were cooking (64.3%), purchase (48.0%), and personnel managements (39.8%). Dieticians, however, had a low perception against safety and nutrition management. Therefore, in order to prevent the outbreak of food-borne diseases, we estimated that the education and the conversion of dietician' perception against safety and nutrition management were needed.