• Journal of the Korean Ceramic Society
• /
• v.35 no.8
• /
• pp.878-884
• /
• 1998

Synthesis of high purity mullite from korean resourceful kaolin and water-soluble aluminium salts was in-vestigated by addition of mullite seed. Single phase of mullite was formed at 1350$^{\circ}C$ however its mullite con-tent was 31-33% Maximum content of mullite synthesized from kaoin aluminium nitrate and 8wt% mul-lite seed was 98% at 1600$^{\circ}C$ for 4 hours.

• Journal of the Korean Ceramic Society
• /
• v.16 no.1
• /
• pp.13-20
• /
• 1979

High purity alumina has been extracted form low grade Korean alunite. Alunite ore was treated by 15% $NH_4OH$ solution, followed by 10% $H_2SO_4$ leaching and metallic impurities such as Fe and Ti were removed by solvent extraction method. Alumina prepared by the extraction process was 99.9% in purity. Hot Petroleum Drying Method has been employed for the preparation of uniformly fine alumina powder, using chemical reagent aluminum sulfate and ammonium aluminum sulfate extrated from Korea alunite. The sinterability of alumina powder prepared by Hot Petroleum Drying Method was shown to be improved in comparison with the one treated by other methods such as ball milling method, but dry pressing was difficult due to the agglomeration of calcined powder. The best slip of alumina powder prepared by Hot Petroleum Drying Method contained a lower soild content than the one treated by other methods. The alumina body formed by soild and drain casting with the former alumina powder showed a higher sintered density.

• Archives of Pharmacal Research
• /
• v.22 no.6
• /
• pp.614-618
• /
• 1999

A reversed-phase high-performace liquid chromatographic method was developed to determine the optical purity of metoprolol enantiomers. The enantiomers were converted to diastereomeric derivatives using (-)-menthyl chloroformate reagent. Separation of the enantiomers as diastereomers was achieved by reversed-phase HPLC within 30 min using Inertsil C8 column. This method allowed determination of 0.05% of either enantiomer in the presence of its stereoisomer and method validation showed adequate linearity over the required range. Owing to the reaction condition during the derivatization with (-)-menthyl chloroformate, the possibility of racemization had to be established. Different ratios of (S)-(-)-metoprolol and (R)-(+)-metoprolol were prepared. Enantiomeric separation of these mixtures took place on a chiralcel OD column or, after derivatization with (-)-menthyl chloroformate, on a C8 column. The results form the these two independent separation systems were compared with trace racemization and were in very good agreement. No racemization was found during the experiment.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.149-153
• /
• 2005

The electron beam machining provides very high resolution up to nanometer scale, hence the E-beam writing technology is rapidly growing in MEMS and nano-engineering areas. In the optical column of the e-beam writer, there are several lenses condensing and focusing electron beams from electron gun with fringing magnetic fields. The polepieces of these lenses are usually made with high purity iron which is hard to fabricate and very expensive. In this paper, the possibility of using polepiece of object lens composed with pure iron and low carbon steel was examined to reduce cost. The magnetic field at object lens was calculated with finite element method, and practical focusing qualities of SEM pictures were observed comparing for the object lens polepieces with pure iron and two type of composed with low carbon steel.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.3
• /
• pp.62-72
• /
• 1995

The present study was undertaken to investigate the dry wear mechanism of the alumina ceramics in the purity variation for the wear of STB2. The wear test was carried out under different experimental condition various sliding speed, contact pressure and sliding distance. According as the alumina purity increased, wear volume of the STB2 decreased and minimum value of wear volume was over to high speed side. According as the sliding speed and sliding distance increased, friction coefficient decreased owing to drop of the shear strength, it decresed largely owing to decreased of elastic modulus and thermal conductivity with decrease in alumina purity. Indicative of minimum, value of wear volume, low speed side was abrasive wear, high speed side was wear of heat softening. The friction surface of ceramics protacted by oxide was transfer from STB2.

• Current Optics and Photonics
• /
• v.7 no.2
• /
• pp.191-199
• /
• 2023

We propose a dual Fabry-Perot interferometer (DFPI) structure that combines two Fabry-Perot interferometers. The structure is designed to have spectral peaks in the red, green, and blue regions simultaneously, to be applicable to R, G, and B subpixels without any patterning process. The optimized structure has been fabricated on a glass substrate using a thermal evaporation technique. When the DFPI structure was attached to the quantum-dot color-conversion layer, the full width at half maximum values of the green and red spectra decreased by 47.29% and 51.07% respectively. According to CIE 1931 color space, the DFPI showed a 37.66% wider color gamut than the standard RGB color coordinate. Thus it was experimentally proven that the proposed DFPI structure improved color purity. This DFPI structure will be useful in realizing a display with high color purity.

• Journal of Powder Materials
• /
• v.11 no.4
• /
• pp.294-300
• /
• 2004

This study for preparation of aluminum nitride (AlN) with high purity was carried out by self-propagating high-temperature synthesis method in two different systems, $Al-N_{2}$ and $Al-N_{2}$-AlN, with the change of nitrogen gas pressure and dilution factor. On the occasion of $Al-N_{2}$ system, unreacted aluminum was detected in the product in spite of high nitrogen pressure, 10 MPa, This may be caused by obstructing nitrogen gas flow to inner part of molten and agglomerate of aluminum, formed in pre-heating zone. In $Al-N_{2}$-AlN system, AlN with a purity of 95% or ever can be prepared in the condition of $f_{Dil}\geq0.5$, $P_{N_{2}}\geq$ 1 MPa, and the purity can be elevated to 98% over in the condition of $f_{Dil}$ = 0.7 and $P_{N_{2}}$ = 10 MPa.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.2
• /
• pp.140-148
• /
• 2007

As an additional high purification method of p-dioxanone monomer for a high molecular weight polymer, the sweating operation of crystalline layer obtained by layered melt crystallization from p-dioxanone-diethylene glycol system was studied. Purity and yield of p-dioxanone crystal depended mainly on the sweating temperature and sweating time. Increasing sweating time and sweating temperature, the purity of p-dioxanone crystal increase, whereas the yield of that decrease, respectively. Through the optimization of sweating operation, p-dioxanone crystal can be upgraded to very high purity over 99.9 % suited to monomer for polymerization.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.566-569
• /
• 2005

A novel purification method was developed for producing homoharringtonine from Cephalotaxus koreana, to guarantee high purity and yield. Our simple, efficient procedure for isolating and purifying homoharringtonine from C. koreanabiomass consisted of solvent extraction, synthetic adsorbent treatment, low-pressure chromatography, followed by high performance liquid chromatography (HPLC). The use of active clay treatment and silica gel low-pressure chromatography in the pre-purification process allowed for the rapid, efficient separation of homoharringtonine from interfering compounds and dramatically increased the yield and purity of crude homoharringtonine for high-performance liquid chromatography (HPLC) purification steps compared with alternative processes. Homoharringtonine could be obtained simply with high yield and purity from biomass using this purification method, while minimizing solvent use and the scale and complexity of HPLC operations for homoharringtonine purification. Purified homoharringtonine was identified and characterized.

• Resources Recycling
• /
• v.15 no.2 s.70
• /
• pp.37-44
• /
• 2006

The total amount of graphite reserves in Korea is about 260 thousand tons. Graphite larks international competitiveness it is mined in only few mines, but recently the demand of portable electronic has increased. Therefore a research for manufacturing domestic high purity graphite is necessary because all of high purity graphite used electrode of 2nd batter depends on expensive importation. A preprocessing level for producing high purity graphite, flotation was conducted using microbubble column machine. In this research $D_{50}=10.314{\mu}m$ sample was used which was produced after grinding 29.50% F.C. primary crushing sample($D_{50}=69.393{\mu}m$) for 20 minutes through attrition mill. As a result using this sample, product above 95% F.C. with recovery over 90% was obtained with only after first stage process through the microbubble column.