• 한국전기전자재료학회논문지
• /
• 제13권4호
• /
• pp.343-348
• /
• 2000

NCZF ferrites doped with B-Bi-Zn(35-25-40) glass ceramics were prepared to investigate the magnetic properties. The XRD peaks of all of samples were observed only spinel phase. As the additive increased at sintering temperature 750$^{\circ}C$ and 850$^{\circ}C$ for 3 hours, the density and shrinkage of the samples increased until 5.28 g/cm$^3$ and 20% respectively. And other samples showed constant trends having the density about 5.4g/cm$^3$. According to SEM images the growth of grain progressed rapidly at sintering temperature of 850$^{\circ}C$ for 3 hours. Increasing the additive initial permeability and complex permeability decreased. The high values of complex permeability as a function of frequency showed that NCZF doped with 3 wt%, 5wt%, samples at sintered temperature of 850$^{\circ}C$/3h and 900$^{\circ}C$/3h.

• Geomechanics and Engineering
• /
• 제9권1호
• /
• pp.15-24
• /
• 2015

The porosity is often regarded as a linear function of fluid pressure in porous media and permeability is approximately looked as constants. However, for some scenarios such as unconsolidated sand beds, abnormal high pressured oil formation or large deformation of porous media for pore pressure dropped greatly, the change in porosity is not a linear function of fluid pressure in porous media, and permeability can't keep a constant yet. This paper mainly deals with the relationship between the damage variable and permeability properties of a deforming media, which can be considered as an exploratory attempt in this field.

• 설비공학논문집
• /
• 제13권12호
• /
• pp.1282-1287
• /
• 2001

This study presents the numerical analysis of natural convection of a micro- environments with air permeability in the clothing air-layer. As a numerical model the clothing air layer of shoulder and arm were adopted. Finite volume method for two-dimensional laminar flow was used for the analysis of flow and thermal characteristics of velocity, temperature and concentration in the air layer between body and clothing. As temperature boundary conditions, a body skin has a high temperature with $34^{\circ}C$ and the environmental temperatures are 5, 15 and $25^{\circ}C$ for various permeability coefficients. The distributions of concentration, temperature and velocity are shown that two large cells form at horizontal and vertical air layer, respectively. As the temperature difference between body skin and environment decreases, the heat transfer is decreased rapidly.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.229-231
• /
• 2013

In this study, the qualitative characteristics of the permeability concrete by the changes in the grading of the recycled aggregates were analyzed and its results are as follows. First, the compressive strength represented the low range of strengths comparing with the typical concrete, and the high compressive strengths were represented as the aggregates with small grading of 2.5mm were used. The bending strengths did not satisfy the targeted range, and the permeability coefficient represented to be good when the aggregates with single grading greater than 5.0mm and the mixed aggregates of 5.0mm with 10.0mm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.204-207
• /
• 2000

In this paper, we have studied the effect of doped with B-Bi-Zn on properties (microstructure, density, shrinkage, permeability as a function of frequency, etc.) of hexagonal-ferrite for high frequency chip-inductor material about several GHz. The permeability were analyzed by impedance analyzer(100 kHz~40 MHz) and network analyzer(30 MHz~3 GHZ). As a result of the characteristics, the B-Bi-Zn glass ceramic was used to lower the sintering temperature for additive as a function of frequency from 100 kHz to 1.8 GHz showed constant tends. The maximum imaginary value of complex permeability was observed near the resonance frequency of 2 GHz.

• 지질공학
• /
• 제17권1호
• /
• pp.135-142
• /
• 2007

토목구조물의 기초가 되는 암반은 암석자체로서는 강도가 높고 투수성이 작지만 공학적 성질은 암반내의 존재하는 크랙, 절리 등 불연속면의 영향을 크게 받는다. 천부 암반내에 지배적으로 분포하는 것은 절리이지만 그 수가 적은 지하심부에 있어서 지하수 투수성의 가능성을 고려하면 암석자체의 미소크랙의 연결성이 투수성 크랙으로서 충분히 고려되어져야 한다. 이 연구에서는 절리성 암반의 절리분포 및 투수성 해석 모델화 방법을 화강암 공시체의 미소크랙에 응용하여 손상진행에 따른 화강암의 투수 특성을 추정하는 것을 목적으로 하였다. 미소크랙 데이터로부터 투수모델을 작성하여 해석한 결과 평균투수계수에 있어서 실제의 투수시험 값과 잘 일치하는 것으로 나타났다. 또한 3차원 모델의 가시화를 가지고 모델표면에서의 미소크랙과의 비교로부터 손상발달에 의한 미소크랙 발생수와 유출면으로부터 계산한 평균투수계수는 비례관계로 실험결과와 잘 일치하는 것으로 해석되었다.

• 한국의류산업학회지
• /
• 제25권1호
• /
• pp.119-126
• /
• 2023

This study aimed to determine the effects of relative humidity and fiber properties on the moisture permeability of multilayer systems by measuring water vapor transmission in the overlapping condition of various fabrics. The results confirmed that the property of the fabric in contact with the humid environment affects the moisture permeability. If the layer facing the humid environment is hydrophobic and the layer facing the dry environment is superhydrophobic, water vapor transmission increases by up to 17.8% compared to the opposite conditions. Comparing the correction values of the water vapor transmission reflecting the thickness of the specimen under the multilayer condition showed that permeability was higher when the hydrophilic or hydrophobic layer was facing the humid environment. The opposite was true from the "push-pull" effect of absorption mechanism. In the case of moisture permeability, the more hydrophilic the surface facing the humid environment, the more permeable that water vapor diffuses and passes through. It was concluded that the "pull-push" effect, in which water vapor diffuses widely through the hydrophilic facing a humid environment and then passes through the hydrophobic layer, contributes to the improvement of permeability. Permeability differed according to the multilayer overlapping condition. When the relative humidity was high, the "pull-push" effect was insignificant. This is caused by water droplets absorption after the partial migration of water due to condensation. These results suggest that the overlapping conditions and properties of fabrics should vary depending on heavy sweating or not.

• 공업화학
• /
• 제29권5호
• /
• pp.556-564
• /
• 2018

본 연구에서는 PEO [poly(ethylene oxide)]/EVA [poly(ethylene-co-vinyl acetate)]에 MWCNT (multi-walled carbon nanotube)-COOH 1, 2, 3, 5 wt% 첨가하여 PEO/EVA/MWCNT-COOH 복합막을 제조하였다. 그리고 복합막에 대해 $30^{\circ}C$, 4~8 bar의 압력에서 $N_2$, $O_2$, $CO_2$의 기체투과 성질을 조사하였다. 각 PEO/EVA/MWCNT-COOH 복합막들에서 $CO_2$의 투과도는 압력 증가에 따라 증가하였고, $N_2$와 $O_2$는 압력에 거의 변화를 받지 않았다. 그리고 MWCNT-COOH 함량이 증가하면서 $CO_2$ 투과도가 증가하다가 2 wt% MWCNT-COOH 함량이상에서 감소하였는데 2 wt% MWCNT-COOH 복합막은 8 bar에서 $CO_2/N_2$ 선택도 77.8과 $CO_2$ 투과도 84 barrer를 나타내었다. 높은 $CO_2/N_2$ 선택도와 $CO_2$ 투과도는 사극자 $CO_2$와 PEO 내의 극성 에테르기, EVA의 극성 에스터기와 함께 MWCNT 표면의 -COOH기 간의 높은 친화력 때문이다.

• 한국전자파학회논문지
• /
• 제26권1호
• /
• pp.24-29
• /
• 2015

본 논문에서는 고투자율 자성기판을 이용한 광대역 안테나 격리도 특성 개선방법을 제안하였다. 제안된 안테나는 평판형 모노폴 안테나의 근접 자계 분석을 바탕으로 고투자율 자성기판을 안테나에 삽입한 형상이며, 동작주파수에서의 안테나 성능을 유지하고, 차단 주파수에서의 간섭을 최소화하여 근접한 안테나와의 격리도 특성을 개선한다. 격리도 개선을 확인하기 위해 동작주파수 2 GHz인 기준 모노폴 안테나를 설정하여 제안된 안테나와 기준 안테나의 $S_{21}$을 자성기판 삽입 전후로 측정하였다. 그 결과, 기존 안테나의 동작 성능은 유지하며, 2 GHz 이상의 차단 주파수에서 $S_{21}$이 5~10 dB 이상 개선되었으며, 고투자율 자성기판을 이용하여 안테나의 격리도 특성 개선이 가능함을 확인하였다.

• 공업화학
• /
• 제16권1호
• /
• pp.144-149
• /
• 2005

Poly(ether ether ketone)을 설폰화시킨 후 poly(ether sulfone) (PES)과 다양한 조성으로 혼합하여 블렌드 막을 제조하였고, 직접메탄올 연료전지(DMFC; Direct Methanol Fuel Cell)용 고분자 전해질 막으로의 응용 가능성을 살펴보기 위하여 조성의 변화에 따른 메탄올 투과도, 수소 이온 전도도, 이온 교환 용량, 그리고 함수율의 변화를 살펴보았다. Sulfonated poly(ether ether ketone) (SPEEK)의 경우 수소 이온 전도도는 비교적 우수하였으나 메탄올 투과도 역시 비교적 높았다. 그러나, PES의 양이 증가함에 따라 수소 이온 전도도보다 메탄올 투과도가 급격히 감소하여서 PES의 양이 40%일 때 가장 좋은 선택성을 나타내었다.