• Fire Science and Engineering
• /
• v.25 no.3
• /
• pp.78-84
• /
• 2011

In this study, we have measured the charring rate of solid sawn timber as a preceding step for develop performance based fire safety design method of wood framed building structures. The follows are the summary of fire test results carried out with $400{\times}400$ mm cross-section Douglas-fir in varied of thickness and grain directions. I) When the timber thickness increase under same dimension, the charring rate decreases gradually. It is seemed the charring layer up on a thickness roles as a insulation, gives combustion delaying time to specimen. 2) The charring rates measured at different depths (10, 20, 30, 40 mm) in timber which varying thickness (20, 40, 80, 120 mm) when exposed maximum 1 hour standard fire increase by 30 mm depth, but decrease at 40 mm. It is seemed the minimum charr layer should be 30 mm for having role of insulation. 3) The charring rate of cross section surface (direction of perpendicular to grain) was more high than that of grain direction. It can be explained by the cracks and gaps from greater charr contraction made more heat flux incident into timber.

• Journal of Arbitration Studies
• /
• v.21 no.2
• /
• pp.85-112
• /
• 2011

These days utilization of copyright in daily life and economic activities is becoming more important than ever, and IT technology is developing day by day. Along with those fact, copyright infringement and dispute is naturally increasing. This thesis dealt with the 3 different issues of ADR on copyright. The First part, introduce ADR system that was performed by Korea Copyright Committee according to Copyright law. This paper evaluate the committee's efforts to provide resolution of copyright disputes via conciliation was effective. So it needs to be look over several countries' ADR, beside conventional judicial remedy. And Korea's copyright conciliation system which is successfully operating also introduced. Second, In many countries, including South Korea are take advantage of conciliation as the way to settle down the dispute over copyright. Furthermore, looked over if we can use arbitration as tool to settle dispute or not. Currently in Korea, patent dispute is handled by Industrial Property Dispute Conciliation Committee(The Invention Promotion Act Ch.5) and Layout-design Review and Mediation Committee(The Act on the Layout-designs of Semiconductor Integrated Circuits Art.29-34), but using performance of those two committee is still too low. In comparison, the copyright committee, a affiliation organization of the ministry of culture, sports and tourism has much more result in conciliation compare with patent dispute. Copyright disputes has arbitrability of it's subject-matter and many regulating organs are interested in it. (especially, binding of arbitral award and final resolution). Take advantage of both conciliation and arbitration could be good way to resolve copyright disputes. Third, the writer look at the proposal on the creation of Northeast Regional Center for Intellectual Property ADR. Because of the nature of copyright and rapid development of internet technology, international use of work become more frequent and accordingly infringement cases are increasing. The role of commercial arbitration regimes and institutions which has progressed significantly worldwide level, but which has only just begun in the intellectual property ADR area, leads also to a clash of often very different legal cultures and protection in a market economy. International cooperation in regional area with conflict interests becomes an important alternative. But it will depend on the building of regional institutions and mechanisms. The feasibility of this proposal and preconditions were examined. Establishment of new international organization requires a lot of time, cost and efforts. And risk of failure is much too high. Therefore factual, statistical review should be preceded. In addition, technical measures, such as on-line arbitration is necessary to review also. Furthermore in order to establish new organization, the relative law, legal environment, public sentiment and international compliance must be carefully considered with factual review about the needs and economic benefits of each country Yet on complex regulatory matters such as IP and ADR, a great deal of the potential benefits from international standards arises not from the international legal framework nor even the formal content of national legislation, but from the informed and effective use made of the possibilities within the system, including by policymakers and regulators.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.2
• /
• pp.185-196
• /
• 1997

By considering the definition and application of resolution as well as the concept and theory of SAR, the essential contents of the SAR design and analysis are described. This paper is to compare and analyze the resolution performance capability of three techniques for achieving azimuth resolution such as the real aperture, the unfocused and the focused techniques, through the simulation. Simulation is performed to make the restricted conditions for the unfocused technique that can be implemented by the less commputing load of signal processingand the lower cost. Through the mission analysis, the use of SAR image can be applied for estimation of whole situation at the regional area in the field of military demands for tactical purpose as well as civilian demands for the damage of disaster. RPV and sall or medium aircraft are selected to carry the SAR for these purposes and the proper resolution turns ou 5~15 m. The trade-off study of variables through the simulations results in the proper conditions such that range is less 3, 000 m, Wavelength is 1~10 m, and the raw signals and results processed by three techniques for two point targets are exhibited undr such conditions. Therefore, at some points, the result of this paper si proposed for useful applications of unforcused technique in the restricted conditions except the identification of the small target at a long range re- quired for high resolution.

• Journal of Bio-Environment Control
• /
• v.26 no.3
• /
• pp.215-220
• /
• 2017

This study was conducted to improve the insufficiency of fruit vegetable grafting system developed by National Institute of Agricultural Sciences, Rural Development Administration. When the rotary blade cut the stem of scions and rootstocks, the grafting failure at curved cutting surfaces happened. The cutting depth of a tomato seedling by a rotated cutter was calculated 0.11 mm even when the cutting arm length and the maximum stem diameter were 50 mm and 5 mm, respectively. Mathematical analysis and high-speed photography showed that there was no problem by cutting in straight the stem of scions and rootstocks. The compression test of seedling stems to design the optimal shape of gripper showed that stems were not completely restored when they were compressed above 0.8 mm and 0.6 mm in case of rootstocks and scion, respectively. This study found that the bending angle of stem of tomato seedlings at the grafting period was 10 degree on average. The optimal gripper finger was the edge finger type which could be precisely set center point by adjusting the distance between fingers. In addition, it was found that most of seedling could be grasped without damage when the finger-to-finger distances is set to 2.5 mm for scion and 3.0 mm for rootstocks and finger are coated by 1 mm-thick flexible material.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.650-657
• /
• 2002

Two experiments were conducted to evaluate the effects of forage:concentrate ratios and feeding principles on milk yield, milk composition, body weight change, postpartum oestrus and feed cost. A total of 36 crossbred F1 cows (Holstein Friesian${\times}$Local Yellow) in the 8th week of lactation were used. In each experiment, animals were divided into three groups using a randomized block design according to the milk yield of the previous eight weeks. Cows were fed 30, 50 and 70% concentrate in the diet based on DM. In experiment 1 (Fc), cows were given the same amount of DM with constant ratios of forage and concentrate within treatments. In experiment 2 (Fa), cows were given the same constant amounts of concentrate as in experiment 1 and ad libitum forage. The forage consisted of a natural grass mixture based on 5 species of grasses with high nutritive values. There was no difference in total DM intake between treatments within experiments. However, cows fed forage ad libitum had higher DM intakes compared to cows fed constant forage (1.6, 4.5 and 9.5% for cows fed 70, 50 and 30% forage, respectively). Daily milk yield of cows fed forage ad libitum was higher than that of cows fed constant forage:concentrate ratio. Within experiment, milk yield was highest for cows fed 30% DM forage, followed by cows fed 50% and then cows fed 70% forage (11.17, 10.98 and 10.71 for the 30Fc, 50Fc and 70Fc cows; 11.73, 11.16 and 10.81 kg for the 30Fa, 50Fa and 70Fa cows, respectively). Decreased forage ratio in the diets resulted in decreased milk fat content and tended to increase milk protein. Increased concentrate ratio in the diet and feeding forage ad libitum increased body weight gain. The effect of forage:concentrate ratio on postpartum oestrus was not significant. The feed cost per kg milk produced was lowest for the cows fed 70% forage. It is concluded that increased ratio of concentrate resulted in increased body weight gain, milk yield, milk protein, and decreased milk fat. Feeding forage ad libitum increased feed intake, milk yield and body weight gain. The ratio of 50% forage is more suitable for milk production and animal condition, but in terms of feed cost and under the conditions of small dairy farmers, the 70% ad libitum forage feeding is recommended.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.6
• /
• pp.838-843
• /
• 2002

The objectives of this study were to examine growth performance and meat quality by three different feeding patterns in Korean native cattle (KNC). In each of 3 years, fifteen KNC were randomly assigned in a (3 feeding management)${\times}$(3 sex) factorial design experiment; thus, in total, there were 5 animals in each of the 9 treatments. The three feeding management treatments were longterm (24 month) restriction feeding (LTFR), long-term restriction feeding-hormone implant (LTFR-tH), and short-term (18 month) nonrestriction feeding (STFNR). Three sexes were bull, steer, and heifer. Concentrate diet was fed restriction-feeding method based on body weight in LTFR and LTFR-tH. However, the diet was fed ad libitum in STFNR. Hormonal implantation was made three times with M-$PO^{TM}$ for bulls and with F-$TO^{TM}$ for heifers at 18, 20, 22 month of age in LTFR-tH. Animal were purchased from the local cattle market and managed in two local farms and at the university research unit. Animals were slaughtered at 24 months for long-term trial and at 18 month for short-term trial. The growth rate was the highest in bulls and the lowest in heifers. However, the differences were diminished in F-$TO^{TM}$ implanted heifers. The average daily gain was high in STFNR due to ad libitum feeding. The carcass grade was similar among the treatments on percentage bases. Hormonal implants improved significantly the meat quality grade in all sexes. Castration increased body fat content and improved meat quality grade by intramuscular fat deposition. In conclusion, long-term feeding and hormone treatment increased meat quality grade more than short-term feeding. However, ADG was higher in the short-term trial although feedefficiency was lower.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.659-666
• /
• 2006

Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.91-96
• /
• 2005

The National Marine Electronics Association(NMEA) is nonprofit-making cooperation composed with manufacturers, distributors, wholesalers and educational institutions. We use the basic port of equipment in order to process the signal from NMEA signal using equipment. When we don't have enough one, we use the multi-port for processing. However, we need to have module development simulation which could multiplex and provide NMEA related signal that we could solve the problems in multi-port application and exclusive equipment generation for a number of signal. For now, we don't have any case or product using NMEA multiplexer so that we import expensive foreign equipment or embody NMEA signal transmission program like software, using multi-port. These have problems since we have to pay lots ci money and build separate processing part for every application programs. Besides, every equipment generating NMEA signal are from different manufactures and have different platform so that it could cause double waste and loss of recourse. For making up for it, I suggest the NMEA multiplexer embodiment, which could independently move by reliable process and high performance single hardware module, improve the memory efficiency of module by designing the optimized Queue, and keep having reliability for realtime communication among the equipment such as main input sensor equipment Gyrocompass, Echo-sound, and GPS.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.671-674
• /
• 2012

Recently, depending on the development of smart devices, a variable services have been offered to meet user's convenience. Due to these advance, the needs of users are extremely being diversified and more specific. In that situation, the needs for the N-Screen system has been varied and gradually evolved. An existing N-Screen system that use the way of video streaming upload its multimedia contents to their own cloud server so that might take a long play-reaction time and the number of user is limited by the server's performance. Because of the web based protocol adopted by existing N-Screen system, there are many different problems like high delay, overhead and something caused by simplex data communications. Therefore, to solve the problems above, this study proposes an application based on HTML5. This application supports Video tag and Progressive download via HTML5 so that improves the play-reaction time for multimedia contents. This system can also get rid of the chronic problems such as an access limitation for lots of users as per video streaming encoding. Also, through web sockets, this study proposes a system that has lower delay than the existing system and communicates in full duplex to be able to link dynamically.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.5
• /
• pp.45-54
• /
• 2010

Recently more and more construction projects have become high-rise, complex and intelligent. Accordingly, such projects require an integrated management system for tasks, with a lean approach to construction with work processes for management and productivity. In particular, Construction Information Technology (CIT) fields are concerned with Building Information Modeling (BIM), which represents the process of generating and managing building data during its life cycle. Constructability research has progressed for the project goal which is a cost-time-quality of optimization by integrated construction knowledge and experience. However, the current constructability process has not been performed efficiently, as the existing 2D drawings and papers lack consistent and accurate information, it is difficult to share the contents of work, and the use of information is inefficient. This study proposes that the reformation and enhancement of BIM-based constructability work process can lead to brilliant performance in the framework of the construction phase through achieving collaboration between the design team and the workers at the site.