• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.271-274
• /
• 1998

This paper describes a new method for separation of the Volterra kernels which are identified by use of M-sequence. One of the authors has proposed a method for identification of Volterra kernels of nonlinear systems using M-sequence and correlation technique. When M-sequence are applied to a nonlinear systems, the cross-correlation function between the input and the output of the nonlinear systems includes cross-sections of high-order Volterra kernels. However, if various order Volterra kernels exixt on the obtained cross-correlation function, it is difficult to separate the Volterra kernels. In this paper, the authors show that the magnitude of Volterra kernels is maginified by the amplitude of M-sequence according to the order of Volterra kernels. By use of this property, each order Volterra kernels is obtained by solving linear equations. Simulations are carried out for some nonlinear systems. The results show that Volterra kernels can be separated in each order successfully by the proposed method.

• 수산해양기술연구
• /
• 제19권1호
• /
• pp.71-78
• /
• 1983

선형시불변계에 있어서, 고차의 원시스템과 근사화되는 저차원모델 사이의 출력응답오차의 제곱의 적분을 평가함수로 취하여, 이 값을 최소로 하는 저차원모델의 파라미터를 구하는 하나의 근사화법을 제안하였다. 본 방법은 Astrom의 알고리즘과 Fletcher-Reeves의 공미경사법을 이용하여 저차원파라미터를 구한 것이다. 그 계산예로서는 발전기계통의 부하주파수제어에 이용되고 있는 4차원시스템을 저차원 근사화시켜서, 그 응답들을 비교.고찰하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.1-4
• /
• 1993

This is the study on the feature of mixing method of high strength flowing concrete using the superplasticizing agent which is used to aim considerable reduction effect of water contents in the same level of consistency and workability. It is the aim of this study to compare workability and engineering properties of high strength flowing concrete according to mixing order of materials and the addition time and method of superplssticizing agent.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.215-218
• /
• 2001

To improve the performance of PID controller of high order systems by model reduction, we proposed a new model reduction method in frequency domain. A new model reduction method we proposed, considered four points (${\angle}G(jw)=0$, $-{\pi}/2$, $-{\pi}$, $-3{\pi}/2$) in stead of two points (${\angle}G(jw)=-{\pi}/2$, and $-{\pi}$) in Nyquist curve. And for high order systems that it have not two point (${\angle}G(jw)=-{\pi}/2$, and $-{\pi}$) in Nyquist curve, we proposed a method to annex very small dead time. This method has a annexed very small dead time on the base model for reduction, and we cancel it after to get the reduced model. It is shown that the performance of proposed method is better than any other methods.

• International Journal of Aeronautical and Space Sciences
• /
• 제14권3호
• /
• pp.201-209
• /
• 2013

Much numerical and experimental research has been done for the flow around an oscillating airfoil. The main research topics are vortex shedding, dynamic stall phenomenon, MAV's lift and thrust generation. Until now, researches mainly have been concentrated on analyzing the wake flow for the variation of frequency and amplitude at a low angle of attack. In this study, wake structures and acoustic wave propagation characteristics were studied for a plunging airfoil at high angle of attack. The governing equations are the Navier-Stokes equation with LES turbulence model. OHOC (Optimized High-Order Compact) scheme and 4th order Runge-Kutta method were used. The Mach number is 0.3, the Reynolds number is, and the angle of attack is from $20^{\circ}$ to $50^{\circ}$. The plunging frequency and the amplitude are from 0.05 to 0.15, and from 0.1 to 0.2, respectively. Due to the high resolution numerical method, wake vortex shedding and pressure wave propagation process, as well as the propagation characteristics of acoustic waves can be simulated. The results of frequency analysis show that the flow has the mixed characteristics of the forced plunging frequency and the vortex shedding frequency at high angle of attack.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.102-103
• /
• 2007

In order to apply resistive superconducting fault current limiters into electric power systems, the urgent issues to be settled are as follows, such as initial installation price of SFCL, operation and maintenance cost due to ac loss of superconductor and the life of cryostat, and high voltage and high current problems. The ac loss and high cost of superconductor and cryostat system are main bottlenecks for real application. Furthermore in order to increase voltage and current ratings of SFCL, a lot of superconductor components should be connected in series and parallel which resulted in extreme high cost. Thus, in order to make practical SFCL, we designed novel hybrid SFCL which combines superconductor and conventional electric equipment including vacuum interrupter, power fuse and current limiting reactor. The main purpose of hybrid SFCL is to drastically reduce total usage of superconductor by adopting current commutation method by use of superconductor and high fast switch. Consequently, it was possible to get the satisfactory test results using this method, and further works for practical applications are in the process.

• 전기학회논문지
• /
• 제61권8호
• /
• pp.1123-1129
• /
• 2012

This paper presents the fast steady state analysis using time-stepping finite element method for a high power three-phase transformer. The high power transformer spends huge computational cost of the time-stepping finite element method. It is because that the high power transformer requires a lot of time to reach steady state by its large inductance component. In order to reduce computational cost, in this paper, the adaptive time-step control algorithm combined with the embedded 2nd 4th singly diagonally implicit Runge-Kutta method and the analysis strategy using variation of the winding resistance are studied, and their numerical results are compared with those from the typical time-stepping finite element method.

• Journal of Ship and Ocean Technology
• /
• 제4권1호
• /
• pp.1-10
• /
• 2000

A low-order potential based boundary element method is applied for the prediction of the performance of flapped rudders as well as all-movable rudders in steady inflow. In order to obtain a reasonable solution at large angles of attack, the location of the trailing wake sheet is determined by aligning freely with the local flow. The effect of the wake sheet roll-up is also included with use of a high order panel method. The flow in the gap of a flapped rudder is modeled as Couette flow and its effect is introduced into the kinematic boundary conditions for flux at both the inlet and the outlet of the gap. In order to validate the present method, the method is applied for a series of rudders and the computational results on forces and moments are compared with experimental data. The effect of the gap size on the forces and moments is also presented.

• 한국통신학회논문지
• /
• 제10권5호
• /
• pp.250-257
• /
• 1985

고차 필터는 각 2차 함수를 종속연결함으로써 실현화한다. 본 논문에서는 다원함수의 고차 대여통과와 대역서지 필터 실현화에 있어서 전 동적범위를 향상시키기 위한 방법을 제시하였으며 고역통과 놋치, 저역통과 놋치 그리고 대칭 놋치등 각 2차함수들의 최적배열을 다원함수의 대역통과와 대역저지 필터에 적용하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 춘계학술대회
• /
• pp.45-48
• /
• 1993

High-order field gradients are useful for spatial localization of a volume of interest and dynamic range improvement of signal detection in NMR (Nuclear Magnetic Resonance) spectroscopy and imaging. This paper proposes a design method of shielded high-order gradient coils to reduce tile effect of eddy current on tile spectroscopy and imaging results. According to the experimental results, the shielded gradient coils produce less than 2 % eddy current compared to non-shielded coils. Two shielded $z^2$ gradient coils have been designed and constructed for 1.5 T whole-body and 3.0 T animal NMR imaging systems. Experimental results are in good agreement with the theoretically expected behavior and show the utility of the shielded high-order gradient coils.