• 제목/요약/키워드: High grade concentrate

검색결과 31건 처리시간 0.027초

장군광산(將軍鑛山) 아연정광(亞鉛精鑛) 저품위(低品位) 현상(現象)의 원인(原因)과 품위(品位) 상승(上昇) 방안(方案)에 대(對)한 광물학적(鑛物學的) 연구(硏究) (Mineralogical Study of Zinc Ores and Mill Products from the Janggun Mine (With Emphasis on the Cause of Low-grade Concentrate and the Scheme of Raising Its Grade))

  • 김수진
    • 자원환경지질
    • /
    • 제10권3호
    • /
    • pp.99-105
    • /
    • 1977
  • Mineralogical study of original and crushed zinc ores as well as mill products was made in order to find out the cause of low-grade concentrate and the scheme of raising its grade. Low-grade concentrate is due to 1) the abundance of other independent sulfides (arsenopyrite, pyrrhotite, chalcopyrite, stannite) and silicate (quartz) in the zinc concentrate, 2) the presence of composite grains of sphalerite and other sulfides or silicate, 3) the presence of a lot of very fine-grained particle of stannite and chalcopyrite within the sphalerite grains, and 4) the high content of iron in sphalerite. It is proposed that further crushing and other appropriate processing should be made in order to increase the grade of zinc concentrate.

  • PDF

저품위 리튬운모광의 활용을 위한 부유선별 시스템 개발 (Development of Flotation System for Utilization of Low Grade Lithium Ore)

  • 이광훈;전호석;백상호;김수강
    • 광물과산업
    • /
    • 제25권
    • /
    • pp.1-10
    • /
    • 2012
  • 본 연구에서는 경북 울진 보암광산의 리튬광을 대상으로 고품위 리튬 정광 생산을 위한 부유선별 연구를 수행하였다. 리튬의 근원광물은 Lepidolite (0.99% $Li_2O$)이며, 주요 맥석광물은 $SiO_X$를 포함하는 규산염 광물(quartz, muscovite)과 방해석(Calcite)이 존재하였다. 따라서 음이온포수제를 이용하여 방해석을 먼저 부유시켜 제거하고, 규산염 광물을 억제하고 리튬 광물을 부유시키는 공정을 적용하였다. 리튬광물 부유선별에서 포수제는 아민계통의 양이온 포수제(Armac-T, Armac-C, Armafloat-18, Armafloat-1597) 중 Armac-T가 가장 효과적이었다. 실험결과 최적 조건인 포수제(Armac-T) 100g/t, 기포제(AF65) 50g/t, 억제제($Na_2SiO_3$) 600g/t, (Lactic acid) 100g/t, 광액농도 20%solids, pH 5.5 그리고 정선횟수 2회에서 $Li_2O$의 품위와 회수율이 각각 4.33%와 80.3%인 결과를 얻었다.

  • PDF

몽골 에르덴솜 텅스텐광 개발을 위한 선별시스템 개발 (Mongolia Erden-soum tungsten development)

  • 김수강;전호석;백상호;김병곤
    • 광물과산업
    • /
    • 제28권
    • /
    • pp.1-13
    • /
    • 2015
  • 본 연구에서는 몽골에서 채취한 텅스텐으로 부터 고품위 텅스텐 정광을 생산 할 수 있는 선별공정 개발연구를 수행하였다. 선별비용 절감과 선별효율 향상을 위해 먼저 조립 산물에서 지그선별에 의해 정광산물을 회수한 다음, 단체분리도의 향상을 위해 재 분쇄 하였다. 이것을 가지고 shaking table을 적용하여 비중이 낮은 맥석광물들을 제거하였다. 이때 회수 된 중광물에는 텅스텐과 비중은 비슷하나, 비자성인 주석이 함께 수반되어 있어 이들의 제거를 위하여 건식 자력선별법을 적용하여 최종 텅스텐 정광을 회수하는 공정을 개발하였다. 본 연구에서 개발된 선별공정을 적용한 실험결과, 최적실험 조건에서 $WO_3$의 품위와 회수율이 각각 67.63%와 86.07%인 최종 정광을 얻었다.

  • PDF

고품위 몰리브덴 회수를 위한 컬럼부선 요인설계 (Experimental Design of Column Flotation for Recovery of High Grade Molybdenite)

  • 김현수;푸레브 오윤빌렉;박철현
    • 자원리싸이클링
    • /
    • 제32권6호
    • /
    • pp.34-44
    • /
    • 2023
  • 본 연구에서 고품위 몰리브데나이트 정광회수를 위해 요인설계를 이용한 컬럼부유선별을 수행하였다. 먼저 삼양 마이닝 플랜트의 부유선별 정광의 단체분리 향상을 위해 평균 입도 165, 116, 46.7 및 38.4 ㎛로 각각 재분쇄하였다. 컬럼부선에 영향을 미치는 다양한 변수에 대한 실험을 수행하였으며 MoS2 품위와 회수율이 각각 98.3 %와 95.28 %인 정광을 얻었다. 또한, 고품위에 영향을 미치는 입도 크기, 세척수 속도 및 억제제에 관한 요인설계 및 실험 데이터를 확보하고 통계분석(SPSS 25) 프로그램을 이용해 회귀분석하였다. 결과로부터, 컬럼부선 변수들 간의 상관관계와 품위(MG) 및 회수율(MR)을 예측할 수 있는 모델식을 도출하였다. 억제제 농도+세척수 속도 및 입도 크기+억제제 농도+세척수 속도의 요인들은 유의수준(0.05)보다 작아 종속변수인 품위에 뚜렷한 영향을 주고 있으며 회수율 모형의 경우, 입도 크기와 세척수의 요인만이 종속변수인 회수율에 영향을 주었다.

인도네시아 잠비산 동광석의 부유선별 특성 연구 (Froth Flotation of Copper Ore from Jambi Deposit, Indonesia)

  • 김학순;전호석;김병곤;백상호
    • 한국광물학회지
    • /
    • 제23권3호
    • /
    • pp.243-250
    • /
    • 2010
  • 인도네시아 잠비산 복합 동광석을 대상으로 고품위 동 정광생산을 위한 부유선별 연구를 수행하였다. 본 연구에 사용된 시료는 대부분 탄산염인 공작석으로 이루어져 있으나, 일부 황화동이 존재하여 자연부유도가 높은 황화동을 먼저 부유선별에 의해 회수한 다음, 침강산물로부터 산화동 회수를 위한 공정을 적용하였다. 먼저 황화동 부유선별에서는 잔세이트(xanthate) 계열의 포수제인 AP-211과 AP-242를 1 : 1의 비율로 300 g/t 첨가하고, 광액 pH 6인 조건에서 Cu 품위와 회수율이 각각 57.7%와 9.5%인 동 정광을 얻었다. 그리고 침전된 산물을 대상으로 지방산 포수제인 올레인산을 300 g/t, 기포제 첨가량 50 g/t, 광액 pH 8.0, 그리고 정선횟수 2회인 조건에서 Cu의 품위와 회수율이 각각 30.8%와 92.1%인 결과를 얻었다. 회수된 황화동 및 산화동 정광을 합산한 결과 최종적으로 Cu의 품위와 회수율이 36.1%와 92.7%인 결과를 얻었다.

Waelz Kiln 슬래그로부터 고품위 철 농축산물의 생산을 위한 최적 물리적 처리공정 (The Optimal Physical Treatment Process for Production of High-grade Iron Concentrate from Waelz Kiln Slag)

  • 한요셉;김성민;한성수;김영재
    • 자원리싸이클링
    • /
    • 제32권2호
    • /
    • pp.3-11
    • /
    • 2023
  • 본 연구에서는 Waelz Kiln(WK) 공정에 의해 발생되는 슬래그로부터 물리적 처리에 의해 60% 이상의 품위를 가지는 철 농축산물을 얻고자 하였다. 대상 WK 슬래그는 수 mm 크기의 조립자로서 슬래그의 T-Fe 함량은 40.24%, ZnO 함량은 1.03%으로 확인되었다. WK 슬래그는 실험실 로드밀을 이용하여 다양한 분쇄시간 동안 분쇄하였으며, 분쇄된 시료는 우선 저자력(0.05 T) 세기에서 선별되었다. 그 결과, 10분 분쇄된 시료에서 가장 높은 철 품위를 나타내었으며, 20분 분쇄시료를 대상으로 자력세기에 따라 실험한 결과, 보다 고자력인 0.8 T에서 가장 높은 품위 및 최고 수준의 회수율이 관측되었다. 앞선 결과들을 바탕으로 본 연구에서는 최적의 관련 물리적 처리공정을 제안하였으며, 최적 공정에 의해 얻어진 철 농축산물의 품위 그리고 농축율은 각각 61.34% 그리고 1.52으로 평가되었다.

금속급 실리콘용 고순도 규사 제조를 위한 물리적 정제 특성 (Preparation of High-grade Silica Sand for Metallurgical-grade Si Using a Physical Beneficiation)

  • 양영철;정수복;채영배;김성
    • 한국광물학회지
    • /
    • 제22권3호
    • /
    • pp.191-197
    • /
    • 2009
  • 고순도 금속급 실리콘 제조에서는 원료가 되는 실리카 광물의 $SiO_2$ 품위가 매우 중요한 요소이다. 베트남 규사광에 대한 광물학적 분석결과를 토대로, 석영과 불순광물의 광물학적 특성차이를 이용하는 분급, 비중 및 자력선별을 포함하는 물리적 종합정제공정을 구성하여 적용시켰다. $SiO_2$ 품위 99.8 wt% 이상의 고순도 규사 정광을 93 wt% 이상 회수하였다. 이러한 고순도 규사 정광은 금속급 실리콘의 순도 규격에 적합하였다.

Effects of Black Sugar® and Mineral® Supplementation on Growth performance and Meat Quality of Hamwoo Steers in Fattening Period

  • Kim, Kwan Sik;Lee, Sang Moo
    • 한국초지조사료학회지
    • /
    • 제34권3호
    • /
    • pp.202-208
    • /
    • 2014
  • This study was carried out investigate the effects of dietary addition of mineral and sugar on the dry matter intake, daily gain, yield grade and quality grade of Hanwoo (Bos taurus coreanae) steers. Three diets fed to steers included a control diet (concentrate mix and rice straw : C) and two treatments diet (control diet + black sugar 100 g + mineral 100 g : T1, and control diet + black sugar 150 g + mineral 50 g : T2). The results are summarized as follows; total feeding intake, body weight gain and daily gain did not show significant differences among the three treatments. Cold carcass weight was significantly (p<0.05) higher in T2 than in the other two treatments (C and T1). There was no significant difference in yield traits of back fat thickness, longissimus muscle area and yield grade among the three treatments (C, T1 and T2). Marbling score showed significantly (p<0.05) higher in order of T2 (5.67) > T1 (4.67) > C (3.67). Meat color, fat color, texture and maturity were no significant difference. Quality grade was higher in T2 than in the other two treatments (C and T1), but there was no significant difference. The results show that marbling score and quality grade of Hanwoo can be increased by high dry matter intake with feeding addition of mineral and sugar.

점토광물 급여가 한우교잡우의 산육능력 및 육질에 미치는 영향 (Effect of Scoria, Quartz Porphyry and Oak Charcoal Powder Feeding on the Meat Quantity and Quality of Fattening Cross Bred Hanwoo Bulls)

  • 강수원;손용석;박남건;진신흠;고서봉
    • 한국축산시설환경학회지
    • /
    • 제5권3호
    • /
    • pp.157-170
    • /
    • 1999
  • This study was conducted to investigate the effects of Scoria, Quartz porphyry and Oak charcoal powder feeding by 1% level of concentrate on the fattening cross bred bulls(5/8 Korean Native Cattle, 2/8 Charolais, 1/8 Brahman germ plasma) Feeding trial was conducted with 4 treatment groups which were T1(Full feeding of concentrate and roughage for 12 months), T2(T1 and Scoria addition), T3(T1 and Quartz porphyry addition) and T4(Oak charcoal addition) for 360 days, consisting of 32 heads whose initially weights were about 299.7kg. The results obtained are summarized as follows; 1. During the over-all period, average daily gains by T3, T4, T2 and T1 were 1.024, 0.987, 0.977kg and 0.964, respectively, without a significant difference by treatments. 2. Concentrate intakes per body weight and TDN intakes required per unit of kilogram gain were lower in addition agent groups than in control, and in all the treatments feed efficiency was higher at early stage for 360 fattening day than at end stage. 3. Carcass weight, dressing percent, back-fat thickness and loin eye muscle area by treatments were 330.9 to 348.4kg(average 340.3kg), 55.2~56.2(average 55.8%), 0.41~0.55(average 0.46cm)and 76.0~80.9$\textrm{cm}^2$(average 77.6$\textrm{cm}^2$), respectively, and were improved in addition agent groups than in control. 4. Meat quality grade is higher in addition agent groups than in control, and heads of 1st grade by treatments was 3, 2, 1 and none in T4, T2, T3 and T1, respectively. 5. Incidence heads of diseases by treatment were not apparently different, but diseases of digestive system was decreased in addition agent groups than in control. 6. The nitrate nitrogen content of fattening bull dung which collected in rectum were 0.082~0.089% (average 0.084%), and the content in addition agent groups was smaller than in controll. 7. Income was higher in order of T4, T3, T2, and T1 and incomes of treatment groups were grater than that of control group by 21.4 to 33.5 percent. According to the above results it may be concluded that fattening bulls may be required to feed no more than 1% of Scoria, Quartz porphyry and Oak charcoal powder based on the concentrate feeding level during the fattening period(12 to 24 month of age) to produce high quality meat and increase income.

TMF와 배합사료의 급여방법이 거세한우의 성장 및 도체특성에 미치는 영향 (Comparison of Growth Performance, Carcass and Meat Characteristics According to the Feeding Method of Concentrate and Total Mixed Fermentation in Hanwoo Steers)

  • 박병기;안준상;최장근;권응기;신종서
    • 한국초지조사료학회지
    • /
    • 제39권4호
    • /
    • pp.281-291
    • /
    • 2019
  • 본 연구는 TMF 및 배합사료 급여방법의 차이가 거세한우의 사양성적 및 도체 특성에 미치는 영향을 검토하기 위하여 수행되었다. 공시동물은 거세한우 24두(166.3±34.4kg)를 이용하였으며, 시험구배치는 육성기부터 비육후기까지 배합사료와 볏짚을 급여하는 대조구, 육성기부터 비육전기까지 TMF를 급여하고 비육후기에는 배합 사료와 볏짚을 급여하는 T1 및 육성기부터 비육후기까지 TMF를 급여하는 T2의 3처리로 하였다. 일당증체량 및 건물섭취량은 처리구간 차이는 없었으며, 혈중 cholesterol 및 HDL-cholesterol 농도는 대조구에 T2에서 증가되는 결과를 보였다(p<0.05). TMF 및 배합사료의 급여방법이 거세한우의 육량등급 및 육질등급에 미치는 영양은 없었으며, 등심의 명도는 대조구 및 T2구에 비해 T1구에서 증가되는 결과를 보였다(p<0.05). PUFA 비율은 대조구에 비해 T2에서 증가되는 것으로 나타났다. 따라서, TMF 및 배합사료의 급여 방법은 거세한우의 성장과 도체등급에 미치는 영향 없이 등심의 육색 및 지방산 조성에 긍정적인 영향을 미칠 수 있을 것으로 판단되며, 향후 공시두수 및 사료 배합비 등에 따른 추가 연구가 필요할 것으로 생각된다.