• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.66-69
• /
• 2006

Three reinforced concrete rigid frames and infilled rigid frames with new retrofitting system were tested under both vertical and cyclic loadings, Experimental programs were carried out to evaluate and improve the seismic performance of such test specimens, such as the hysteretic behavior, the maximum horizontal strength, crack propagation, and ductility etc. under load reversals. All the specimens were modeled in one-third scale size. For specimens(RFHPC, RFAR) designed by the improving of seismic performance of the rigid frame using the high ductile fiber composite PC panel and ALC panel system, load-carrying capacities were increased $1.45{\sim}2.28$ times, and hysteretic behavior was very stable during the final tests in comparison with the standard specimen(SRF).

• Journal of the Earthquake Engineering Society of Korea
• /
• v.21 no.4
• /
• pp.197-204
• /
• 2017

This paper aims to analyze the economic feasibility and investigate the possibility of elastic seismic design of wind-designed highrise concentrically braced frames considering change of mechanical properties of Korean steel under the strong wind and the low seismicity in Korea. To this end, first, highrise concentrically braced frames were designed considering strong wind load. And then, analyses of the economics of them were performed. The seismic performance evaluation of wind-designed highrise buildings was conducted using the response spectrum analysis procedure. Analysis results show that it is possible to save up to approximately 90% of the amount of steel on the 10% increase in steel strength without serviceability. However, with serviceability, the design sectional area of the steel with relatively high strength tends to increment considerably because of the lateral stiffness due to reduction of the inertia moment and so on. This point might apply to limitation of the steel with high tensile yield strength.

• International Journal of High-Rise Buildings
• /
• v.5 no.4
• /
• pp.305-318
• /
• 2016

In the design of super-tall towers, engineers often find the conventional frame systems used in countless buildings in the past decades incapable of providing the required form, performance and constructability demanded by super-tall heights. The strength of the diagrid as a structural system in high-rise towers is the total flexibility it affords the designer as an adaptable, efficient and buildable scheme. Using fundamental engineering principles combined with modern computational tools, designers can take minimum load path forms to create rationalized diagrid geometries to create optimized, highly efficient towers. The use of diagrid frames at SOM has evolved as a structural typology beginning with the large braced frames on the John Hancock Center and continued in modern applications proving to be a powerful system in meeting the demands of supertall buildings.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.145-150
• /
• 2003

The objective of this study is to investigate the effect of torsional eccentricity on the seismic response of high-rise RC bearing-wall structures with vertical irregularity. For this purpose, two 1:12 scale 17-story RC model structures, the one has concentric shear wall and the other has eccentric shear wall, were constructed and then subjected to a series of earthquake excitations. The test result shows the followings: 1) the layout of shear wall has the negligible effect on the natural period and the base shear coefficient, 2) the eccentric model behaves in the first and second mode while the concentric model has the first mode predominantly, 3) the stiff frame in the eccentric model resists most of overturning moment in the severe earthquake though both frames (the stiff and flexible frames) resist almost equally in the design earthquake.

• Steel and Composite Structures
• /
• v.39 no.1
• /
• pp.35-50
• /
• 2021

Eccentrically braced frames (EBFs) are utilized as a lateral resisting system in high seismic zones. Links are the primary source of energy dissipation and they are exposed to high deformation, which may lead to buckling. Web stiffeners were introduced to prevent buckling of shear link. AISC 341 provides the required vertical stiffeners for a shear link. In this study, different stiffener configurations were examined. The main objective is to improve the behavior of short links using different stiffener configurations. Pursuant to this goal, a comprehensive numerical study is conducted using ABAQUS. Shear links with different stiffener configurations were subjected to cyclic loading using loading protocol mandated by AISC 341. The results are compared in terms of energy dissipation and shear capacities and rupture index. The proposed stiffener configurations were further verified with different link length ratios, I-shapes and thickness of stiffener. Based on the results, the stiffener configuration with two vertical and two diagonal stiffeners perpendicular to each other is recommended. The proposed stiffener configuration can increase the shear capacity, energy dissipation capacity and the ratio of energy/weight up to 27%, 38% and 30%, respectively. Detailing of the proposed stiffener configuration is presented.

• Proceedings of the Korea Society of Design Studies Conference
• /
• 2001.10a
• /
• pp.43.2-43
• /
• 2001

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 1999.04a
• /
• pp.129-134
• /
• 1999

• Steel and Composite Structures
• /
• v.24 no.4
• /
• pp.441-453
• /
• 2017

In Y-shaped eccentrically braced frame fabricated with high strength steel (Y-HSS-EBF), link uses conventional steel while other structural members use high strength steel. Cyclic test for a 1:2 length scaled one-bay and one-story Y-HSS-EBF specimen and shake table test for a 1:2 length scaled three-story Y-HSS-EBF specimen were carried out to research the seismic performance of Y-HSS-EBF. These include the failure mode, load-bearing capacity, ductility, energy dissipation capacity, dynamic properties, acceleration responses, displacement responses, and dynamic strain responses. The test results indicated that the one-bay and one-story Y-HSS-EBF specimen had good load-bearing capacity and ductility capacity. The three-story specimen cumulative structural damage and deformation increased, while its stiffness decreased. There was no plastic deformation observed in the braces, beams, or columns in the three-story Y-HSS-EBF specimen, and there was no danger of collapse during the seismic loads. The designed shear link dissipated the energy via shear deformation during the seismic loads. When the specimen was fractured, the maximum link plastic rotation angle was higher than 0.08 rad for the shear link in AISC341-10. The Y-HSS-EBF is a safe dual system with reliable hysteretic behaviors and seismic performance.

• The KIPS Transactions:PartC
• /
• v.15C no.6
• /
• pp.547-556
• /
• 2008

Recently, with the advance of computing and networking technique, the high speed internet becomes widespread, however, it is still hard job to do streaming the media which requires high network bandwidth over the internet. Previous researches for streaming over the internet mainly proposed techniques that controls the QoS(Quality of Service) of the media in proportion to the network status. Though, this could be the solution for the service provider while the service user who wants constant QoS may not satisfy with variable QoS. In the paper, we propose a network adaptive prefetching technique, NAP, for guarantee of constant QoS. The NAP prefetches frames by increasing the frame transmission rate while the available network bandwidth is high. The NAP uses the prefetched frames to guarantee the QoS while the available network bandwidth is low. The experiment result shows that the proposed NAP could guarantee the constant QoS by prefetching the frames adaptively to the network bandwidth with the characteristic of video stream.

• The KIPS Transactions:PartA
• /
• v.16A no.5
• /
• pp.327-338
• /
• 2009

Recently, with the advance of computing and networking technique, the high speed internet becomes widespread, however, it is still hard job to do streaming the media which requires high network bandwidth over the internet. Previous researches for streaming over the internet mainly proposed techniques that controls the QoS(Quality of Service) of the media in proportion to the network status. Though, this could be the solution for the service provider while the service user who wants constant QoS may not satisfy with variable QoS. In the paper, we propose a network adaptive prefetching technique, PAP, for guarantee of constant QoS. The PAP prefetches frames by increasing the frame transmission rate while the available network bandwidth is high. The PAP uses the prefetched frames to guarantee the QoS while the available network bandwidth is low and increases the playout interval to prevent buffer underflow. The experiment result shows that the proposed PAP could guarantee the constant QoS by prefetching the frames adaptively to the network bandwidth with the characteristic of video stream.