• 제목/요약/키워드: High force

검색결과 5,624건 처리시간 0.038초

파랑-지반-해안구조물의 상호작용에 기인하는 해저지반과 구조물의 동적응답에 관한 수치시뮬레이션 (Numerical Simulation on Seabed-Structure Dynamic Responses due to the Interaction between Waves, Seabed and Coastal Structure)

  • 이광호;백동진;김도삼;김태형;배기성
    • 한국해안·해양공학회논문집
    • /
    • 제26권1호
    • /
    • pp.49-64
    • /
    • 2014
  • 해안 및 해양구조물 하부의 해저지반에 고파랑이 장시간 작용하는 경우 과잉간극수압(진동과잉간극수압과 잔류과잉간극수압의 합)이 크게 발생할 수 있고, 이어지는 유효응력의 감소에 따라 해저지반에 액상화가 발생될 수 있다. 일단, 지반액상화가 발생 및 진행되면 구조물의 침하 혹은 전도에 의해 종국적으로 구조물이 파괴될 가능성이 높아진다. 특히, 중력식구조물이 설치된 하부지반내에서는 파작용에 의한 큰 과잉간극수압과 작은 유효응력으로 부터 발생되는 지반액상화의 여부를 정확히 예측할 필요가 있고, 이러한 지반의 동적거동 특성은 설계에 충분히 반영되어야 한다. 본 연구에서는 2차원수치파동수로를 불규칙파동장으로 확장한 수치해석법을 적용하여 해저지반상 및 구조물의 표면상에서 시간변동의 동파압과 유속에 의한 전단응력을 산정하고, 그 결과를 지반의 동적거동을 정밀하게 재현할 수 있는 해저지반응답용의 수치해석프로그램 FLIP(Finite element analysis LIquefaction Program)에 입력치로 적용하여 해저지반내에서 과잉간극수압 및 유효응력의 시공간적인 변화, 이로 인한 액상화, 그리고 지반의 시간변형과 구조물의 시간변위를 정량적으로 평가한다. 이로부터 해저면상에서 전단응력을 고려한 경우 구조물 전면의 하부해저지반에서 액상화 가능성을 확인할 수 있었고, 액상화된 토립자는 흐름에 저항력을 상실하므로 세굴로 이어질 것으로 판단된다. 따라서, 태풍시 고파랑의 작용이 장시간 지속되는 경우 구조물의 전면에서는 지반액상화로 인한 지반강도의 현저한 저하로 구조물의 진동변위가 더욱 크게 발생되고, 더불어 구조물의 안정성에 영향을 미칠 것으로 예상된다.

지르코니아 표면 처리와 시멘트 종류에 따른 치면과의 전단 결합 강도 비교 연구 (In Vitro Evaluation of Shear Bond Strengths of Zirconia Cerami with Various Types of Cement after Thermocycling on Bovine Dentin Surface)

  • 조수현;조인호;이종혁;남기영;김종배;황상희
    • 구강회복응용과학지
    • /
    • 제23권3호
    • /
    • pp.249-257
    • /
    • 2007
  • State of problem : The use of zirconium oxide all-ceramic material provides several advantages, including a high flexural strength(>1000MPa) and desirable optical properties, such as shading adaptation to the basic shades and a reduction in the layer thickness. Along with the strength of the materials, the cementation technique is also important to the clinical success of a restoration. Nevertheless, little information is available on the effect of different surface treatments on the bonding of zirconium high-crystalline ceramics and resin luting agents. Purpose : The aim of this study was to test the effects of surface treatments of zirconium on shear bond strengths between bovine teeth and a zirconia ceramic and evaluate differences among cements Material and methods : 54 sound bovine teeth extracted within a 1 months, were used. They were frozen in distilled water. These were rinsed by tap water to confirm that no granulation tissues have left. These were kept refrigerated at $4^{\circ}C$ until tested. Each tooth was placed horizontally at a plastic cylinder (diameter 20mm), and embedded in epoxy resin. Teeth were sectioned with diamond burs to expose dentin and grinded with #600 silicon carbide paper. To make sure there was no enamel left, each was observed under an optical microscope. 54 prefabricated zirconium oxide ceramic copings(Lava, 3M ESPE, USA) were assigned into 3 groups ; control, airborne-abraded with $110{\mu}m$ $Al_2O_3$ and scratched with diamond burs at 4 directions. They were cemented with a seating force of 10 ㎏ per tooth, using resin luting cement(Panavia $F^{(R)}$), resin cement(Superbond $C&B^{(R)}$), and resin modified GI cement(Rely X $Luting^{(R)}$). Those were thermocycled at $5^{\circ}C$ and $55^{\circ}C$ for 5000 cycles with a 30 second dwell time, and then shear bond strength was determined in a universal test machine(Model 4200, Instron Co., Canton, USA). The crosshead speed was 1 mm/min. The result was analyzed with one-way analysis of variance(ANOVA) and the Tukey test at a significance level of P<0.05. Results : Superbond $C&B^{(R)}$ at scratching with diamond burs showed the highest shear bond strength than others (p<.05). For Panavia $F^{(R)}$, groups of scratching and sandblasting showed significantly higher shear bond strength than control group(p<.05). For Rely X $Luting^{(R)}$, only between scratching & control group, significantly different shear bond strength was observed(p<.05). Conclusion : Within the limitation of this study, Superbond $C&B^{(R)}$ showed clinically acceptable shear bond between bovine teeth & zirconia ceramics regardless of surface treatments. For the surface treatment, scratching increased shear bond strength. Increase of shear bond strength by sandblasting with $110{\mu}m$ $Al_2O_3$ was not statistically different.

영공(領空)과 우주공간(宇宙空間)의 한계(限界)에 관한 법적(法的) 고찰(考察) ("Legal Study on Boundary between Airspace and Outer Space")

  • 최완식
    • 항공우주정책ㆍ법학회지
    • /
    • 제2권
    • /
    • pp.31-67
    • /
    • 1990
  • One of the first issues which arose in the evolution of air law was the determination of the vertical limits of airspace over private property. In 1959 the UN in its Ad Hoc Committee on the Peaceful Uses of Outer Space, started to give attention to the question of the meaning of the term "outer space". Discussions in the United Nations regarding the delimitation issue were often divided between those in favour of a functional approach ("functionalists"), and those seeking the delineation of a boundary ("spatialists"). The functionalists, backed initially by both major space powers, which viewed any boundary as possibly restricting their access to space(Whether for peaceful or military purposes), won the first rounds, starting with the 1959 Report of the Ad Hoc Committee on the Peaceful Uses of Outer Space which did not consider that the topic called for priority consideration. In 1966, however, the spatialists, were able to place the issue on the agenda of the Outer Sapce Committee pursuant to Resolution 2222 (xxx1). However, the spatialists were not able to present a common position since there existed a variety of propositions for delineation of a boundary. Over the years, the funtionalists have seemed to be losing ground. As the element of location is a decisive factor for the choice of the legal regime to be applied, a purely functional approach to the regulation of activities in the space above the Earth does not offer a solution. It is therefore to be welcomed that there is clear evidence of a growing recognition of the defect inherent to such an approach and that a spatial approach to the problem is gaining support both by a growing number of States as well as by publicists. The search for a solution of the problem of demarcating the two different legal regimes governing the space above the Earth has undoubtedly been facilitated, and a number of countries, among them Argentina, Belgium, France, Italy and Mexico have already advocated the acceptance of the lower boundary of outer space at a height of 100km. The adoption of the principle of sovereignty at that height does not mean that States would not be allowed to take protective measures against space activities above that height which constitute a threat to their security. A parallel can be drawn with the defence of the State's security on the high seas. Measures taken by States in their own protection on the high seas outside the territorial waters-provided that they are proportionate to the danger-are not considered to infringe the principle of international law. The most important issue in this context relates to the problem of a right of passage for space craft through foreign air space in order to reach outer space. In the reports to former ILA Conferences an explanation was given of the reasons why no customary rule of freedom of passage for aircraft through foreign territorial air space could as yet be said to exist. It was suggested, however, that though the essential elements for the creation of a rule of customary international law allowing such passage were still lacking, developments apperaed to point to a steady growth of a feeling of necessity for such a rule. A definite treaty solution of the demarcation problem would require further study which should be carried out by the UN Outer Space Committee in close co-operation with other interested international organizations, including ICAO. If a limit between air space and outer space were established, air space would automatically come under the regime of the Chicago Convention alone. The use of the word "recognize" in Art. I of chicago convention is an acknowledgement of sovereignty over airspace existing as a general principle of law, the binding force of which exists independently of the Convention. Further it is important to note that the Aricle recognizes this sovereignty, as existing for every state, holding it immaterial whether the state is or is not a contracting state. The functional criteria having been created by reference to either the nature of activity or the nature of the space object, the next hurdle would be to provide methods of verification. With regard to the question of international verification the establishment of an International Satelite Monitoring Agency is required. The path towards the successful delimitation of outer space from territorial space is doubtless narrow and stony but the establishment of a precise legal framework, consonant with the basic principles of international law, for the future activities of states in outer space will, it is still believed, remove a source of potentially dangerous conflicts between states, and furthermore afford some safeguard of the rights and interests of non-space powers which otherwise are likely to be eroded by incipient customs based on at present almost complete freedom of action of the space powers.

  • PDF

유아 영재의 판별과 역동적 평가 (Early Identification of Gifted Young Children and Dynamic assessment)

  • 장영숙
    • 영재교육연구
    • /
    • 제11권3호
    • /
    • pp.131-153
    • /
    • 2001
  • 유아기에 영재를 판별하여 유아 영재의 흥미와 능력에 적합한 교육 프로그램을 제공하면, 유아영재의 잠재력은 극대화될 수 있다. 유아기에는 다른 연령에 비해 특히 실제의 발달과 잠재적 발달간의 차이가 특히 많기 때문에, 혼자 해결하도록 할 때보다 적절한 교육적 개입을 해주었을 때 더 많은 잠재적 능력을 발휘할 수 있다. 유아가 가진 영재성을 사장시키지 않기 위해서는 유아의 영재성을 조기에 판별하여 그들에게 적절한 교육적 프로그램을 제공하는 것이 필요하다. 본 연구의 목적은 역동적 평가방법을 적용한 유아 영재 판별방법을 제시하고자 하는 것이다. 이를 위해. 본 연구에서는 기존의 유아 영재 판별 방법들을 검토하고 이에 대한 문제점을 살펴보았다. 그런 후에 역동적 평가의 특징과 유형을 살펴보고, 마지막으로, 역동적 평가가 유아 영재를 판별하고자 할 때 어떻게 적용될 수 있는지를 탐색해 보았다. 유아기에 역동적 평가방법을 이용해 영재를 판별하면 다음과 같은 점에서 유용성이 있다. 첫째, 유아 영재의 판별에 역동적 평가방법을 사용하면 표준화 검사에 능력을 보이지 않는 잠재력이 있는 유아를 판별할 수 있다. 둘째, 역동적 평가방법은 학습에 대한 산출물보다 학습에 대한 과정을 평가할 수 있다. 셋째, 역동적 검사는 유아 영재를 조기에 발견하고 이에 적절한 교육적 처치를 할 수 있는 정보를 제공받을 수 있어 개별화교육이 가능하도록 해준다. 넷째, 역동적 평가는 진단과 교수를 연결시킴으로써 유아의 잠재력을 더욱 정확하게 측정할 수 있도록 해주며, 유아 영재들이 계속적인 성장을 할 수 있도록 교육적인 환경을 제공해 줄 수 있다.ject-orientation. For the convenience of input, output analysis, GUI(Graphic User Interface) of menu, window, dialog box, etc. are provided to the user, For the execution of DADSim, Silicon Graphic IRIX 6.3 or high version is required. DADSim can be used for the effectiveness analysis of­defence systems. Some illustrative examples will be shown in this paper.s, namely resources of military force planing requirement for 15 years, is given already for the accomplishment of military strategy. The purpose of this study is to seek a direction of the ROK′s military build-up policy in a viewpoint of capability-based military build-up.group, no difference was found in its fragrance. And, no difference was found in brightness and viscosity between samples. As a result of conducting the palatability test,

  • PDF

양념으로 사전 숙성하여 진공포장한 사슴고기의 냉장저장 중 품질 변화 (Changes of in Vacuum Packed Pre-aged Venison with Seasoning during Chilled Storage)

  • 김일석;진상근;하경희;박석태;곽경락;박정권;강양수;정구용
    • 한국축산식품학회지
    • /
    • 제25권4호
    • /
    • pp.442-448
    • /
    • 2005
  • 사슴 뒷다리 부위를 채취하여 일정한 크기로 자른 후 동일한 비율의 소스(T1 고추장 소스, T2 간장 소스)에 혼합하고 이를 플라스틱 박스에 넣어 $0\pm1^{\circ}C$에서 10일간 사전 숙성 처리한 후 진공 포장하여 $0\pm1^{\circ}C$에서 28까지 저장하면서 품질 특성을 조사하였다. pH는 두 처리구 모두 저장기간이 길어짐에 따라 유의적으로 감소하였다(p<0.05). T1의 염도는 저장 전 기간 동안 유의적인 차이가 없었고(p>0.05), T2는 저장 28일에는 $1.33\%$로 유의적으로 높았다(p<0.05). 당도는 T1이 T2보다 저장 전 기간 동안 유의적으로 높았다(p<0.05). 저장 기간이 길어짐에 따라 T1에서 $L^*$값과 $b^*$값은 증가하는 반면 T2는 감소하였다. $b^*$값과 전단가$(g/cm^2)$는 저장 기간이 경과함에 따라 모두 증가하였다. 관능검사 결과, 저장 28일 차까지 전체적인 기호도는 $6.75(T1)\~7.00(T2)$ 수준으로 비교적 높은 점수를 얻었다. 본 연구에서 양념으로 사전 숙성 처리하여 진공포장한 양념 사슴육은 새로운 메뉴로서의 가치가 있을 것으로 여겨진다.

자궁암 치료용 다채널 초음파 온열치료기 (Multi-element Ultrasound Applicator for the Treatment of Cancer in Uterus and Cervix)

  • 이레나
    • 한국의학물리학회지:의학물리
    • /
    • 제16권1호
    • /
    • pp.16-23
    • /
    • 2005
  • 본 연구에서는 자궁경부암 및 질암 치료 시 고선량률 강내 근접치료기와 병행하여 사용가능한 다채널 초음파 온열 치료 기구를 제작하였다. 텐덤형의 경우 자궁 내에 삽입이 용이하도록 외부직경 4 mm, 두께 0.7 mm, 길이 24.5 mm인 원통형 plezo-ceramic crystal transducer (PZT-5A) 물질이 초음파 발생원으로 사용되었다. 질벽 또는 질 천정치료에 이용될 치료기는 질에 삽입되어야 하므로 질의 크기와 비슷한 직경 24.5 mm, 두께 1.3 mm, 길이 15.2 mm인 원통형 PZT-8 물질이 이용되었다. 임피던스와 phase 측정결과에 따라 외부직경이 4 mm인 PZT-5A의 작동주파수는 3.2 MHz 로 결정되었고 외부직경이 24.5 mm인 PZT-8 물질의 작동 주파수는 1.7 MHz로 결정되었다. Radiation force 방법으로 측정된 초음파 발생효율은 텐덤형 초음파원은 33%이고 원통형 초음파원은 61%이다. 원통형 초음파 발생물질로부터 발생되는 초음파 분포도를 MATLAB을 이용하여 계산하였고 실제 물 팬텀 내에서 열전대를 이용하여 측정하였다. 계산을 통해 얻어진 radial 한 방향으로 방사된 초음파압은 자궁내로 삽입되는 텐덤형 트랜스듀서의 경우 표면에서 5 mm 되는 점을 기준으로 10 mm 에서는 58%이고 20 mm에서는 45%이다. 질 치료에 사용될 트랜스듀서의 세기는 표면으로부터 5 mm에서의 세기를 기준으로 15 mm 거리에서는 78%, 25 mm 거리에서는 66%로 감소하였다. 특성분석 결과 직경 4 mm인 PZT-5A 와 24.5 mm인 PZT8 물질은 온열치료의 초음파원으로 사용가능함이 입증되었다. 따라서 직경 4 mm인 PZT-5A 트랜스듀서 3개를 연결하여 치료길이가 75 mm인 텐덤형 온열치료기구를 제작하였고 직경 24.5 mm인 PZT-8 트랜스듀서 4개를 연결하여 치료길이가 61 mm인 질암 치료용 온열치료기구를 제작하였다.

  • PDF

Holstein과 교잡종 거세우 및 처녀우의 성장발육, 사료이용성 및 도체특성 비교 연구 (Study on Comparison of Growth Performance, Feed Efficiency and Carcass Characteristics for Holstein and F1(Holstein ♀ x Hanwoo ♂) Steers and Heifers)

  • 강수원;오영균;김경훈;최창원;손용석
    • Journal of Animal Science and Technology
    • /
    • 제47권4호
    • /
    • pp.593-606
    • /
    • 2005
  • Holstein 및 교잡종(Holstein♀×한우♂)의 거세우 및 처녀우 각 8두씩 총 32두(평균체중, Holstein 거세우:196.9±25.2kg, Holstein 처녀우:163.4±11.3kg, 교잡종 거세우:169.6±24.9kg, 교잡종 처녀우 156.9±15.6kg)를 대상으로 7개월령부터 24개월령까지 비육시험을 실시한 결과를 요약하면 다음과 같다. 성장단계별 일당증체량은 육성기, 비육전기, 비육중기 및 비육후기에 각각 0.733~1.018(평균 0.869), 0.994~1.255(평균 1.094), 0.947~1.259(평균 1.122) 및 0.736~0.824kg(평균 0.790kg)으로 비육중기>비육전기>육성기>비육후기의 순으로 높았다. 그러나 전 비육기간의 일당증체량은 0.882~1.061kg(평균 0.957kg)으로 순종이 교잡종보다 0.072kg(7.3%), 그리고 성별로는 거세우가 처녀우에 비해 0.106kg(10.5%)이 더 증체되었다. 전 비육기간의 농후사료 급여수준은 체중의 1.9% 내외이고, 볏짚은 농후사료 급여량의 25% 수준이 바람직한 것으로 나타났다. 그리고 1kg 증체에 소요된 농후사료 및 TDN량은 순종이 교잡종보다 4.6%가 많았으며, 처녀우가 거세우보다 7.3%가 많아 순종보다는 교잡종이, 그리고 처녀우보다 거세우의 사료이용성이 높았다. 도체조사 결과, 등지방두께는 순종이 교잡종보다 엷었고, 등심단면적은 순종이 교잡종보다 적었다. 도체중 1kg에 대한 등심단면적은 순종보다 교잡종이, 그리고 거세우보다 처녀우가 넓었다. 그리고 육색은 교잡종보다 순종이 우수하였으나 성별에 따른 뚜렷한 차이는 없었다. 쇠고기의 물리화학적 특성에서 전단력, 가열감량 및 보수력 등과 관능검사 결과의 다즙성, 연도 및 향미 등은 순종보다 교잡종이, 그리고 거세우보다 처녀우가 우수하였다. 이상과 같은 결과들을 종합해 볼 때, 고급육생산은 순종보다 교잡종이, 그리고 거세우보다 처녀우가 유리하고, Holstein 및 교잡종의 거세우 및 처녀우 비육시 농후사료는 체중의 1.9%, 볏짚은 농후사료 량의 25% 수준에서 결정하는 것이 바람직 할 것으로 판단된다.

Wearable Computers

  • Cho, Gil-Soo;Barfield, Woodrow;Baird, Kevin
    • 섬유기술과 산업
    • /
    • 제2권4호
    • /
    • pp.490-508
    • /
    • 1998
  • One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

  • PDF

짧은 티타늄 지대주에 합착된 CAD/CAM 금속 코핑의 시멘트 종류에 따른 유지력 비교 (Retention of CAD/CAM Metal Copings Cemented on Short Titanium Abutments with Different Cements)

  • 김효정;송은영;윤지영;이시호;이용근;오남식
    • 구강회복응용과학지
    • /
    • 제28권2호
    • /
    • pp.119-126
    • /
    • 2012
  • 시멘트 유지 임플란트 지지 수복물은 치과 치료에 일상적으로 사용된다. 임플란트와 지대주 나사연결의 안정적인 견고함과 골유합 임플란트의 높은 생존율로 인해 높은 강도를 가진 시멘트의 사용이 점차 늘어나고 있다. 그러나 CAD/CAM을 이용하여 제작한 금속 코핑의 유지력에 대해 이용할 수 있는 임상 자료가 없다. 네 종류의 시멘트를 이용하여 티타늄 지대주와 CAD/CAM을 이용하여 제작한 금속 코핑의 유지력을 평가하는 것과 시멘트 유지력에 대한 sandblasting의 효과를 알아보고자 함이다. 40개의 티타늄 지대주 블록(Innovium, 세라젬바이오시스, 대한민국)을 제작하여 네 그룹으로 나누었다. 40개의 금속 코핑을 CAD/CAM을 이용하여 제작하고 금속 코핑의 교합면 상방부에 유지력 테스트를 위해 구멍을 형성하였다. 네 종류의 시멘트는 Fujicem(Fuji, Japan), Maxcem Elite(Kerr, USA), Panavia F2.0(Kurarary, Japan), Superbond C&B(Sunmedical, Japan)이다. 금속 코핑과 티타늄 지대주를 제조사의 지시대로 시멘트 혼합하여 합착하고 100% 습도 하에 37도에서 24시간 동안 보관 후 유지력 테스트하였다. 유지 실패가 발생하는 힘을 newton으로 기록하고 실패의 양상 또한 기록하였다. 유지력의 평균과 표준 편차를 ANOVA와 Paired t-test 로 통계분석하였다. Panavia F2.0이 Fujicem과 Maxcem Elite보다 통계적으로 유의하게 높은 유지력을 보였다(p<0.05). Sandblasting이 모든 시멘트에서 유의하게 유지력을 증가시켰다(p<0.05). 유지력 실패의 양상은 대부분의 시멘트가 금속 코핑 내부에 남아있는 접착성 실패였다. 본 연구의 한계 내에서 Panavia F2.0이 Fujicem이나 Maxcem Elite보다 통계적으로 유의하게 큰 유지력을 보였고(p<0.05), Fujicem과 Maxcem Elite는 유지력의 차이를 보이지 않았다. Sandblasting처리는 모든 실험군에서 유지력의 향상을 보였다. 따라서 임플란트 지대주에 합착된 금속 코핑의 유지력은 표면 거칠기와 시멘트의 종류에 영향을 받는다.

원심펌프 회전차 Modification시 성능개선에 관한 유동해석 연구 (A Fluid Analysis Study on Centrifugal Pump Performance Improvement by Impeller Modification)

  • 이아영;장현준;이진우;조원정
    • 한국가스학회지
    • /
    • 제24권2호
    • /
    • pp.1-8
    • /
    • 2020
  • 원심펌프는 통상적으로 임펠러를 고속으로 회전시켜 원심력을 통해 유체 에너지를 전달하는 설비로서 기화용 해수펌프, 공업용수 및 해수를 사용하는 소화펌프 등 많은 LNG 생산기지에서 사용하고 있는 주요 프로세스 설비이다. 현재 LNG 플랜트 현장에서의 펌프는 장기간 수요처가 원하는 공급량에 따라 운전조건이 변동되어 펌프의 성능이 저하되고 있다. 특히 펌프는 플랜트 현장에서 소비 전략량의 많은 부분을 차지하고 있어, 최적의 운전조건을 찾지 못한다면 장기간 플랜트 운영 시 막대한 에너지 손실비용을 발생할 수 있다. 이러한 문제점을 해결하기 위해 펌프의 운전조건별 변동에 따른 유동해석 및 결과분석을 통하여 성능저하 요인을 파악하고 최적의 운전조건을 확인하는 기술이 필요하다. 실험기법을 통해 운전 효율성 평가를 하기 위해서는 현장의 운전조건과 실험장비 제작 등 상당한 시간과 비용이 발생되기 때문에 신속하고 정확한 전산유체역학(CFD) 기법을 활용하여 본 연구에서 결과를 도출하였다. 펌프의 성능이 현장의 사정에 맞지 않아 펌프 성능을 줄일 필요가 있는 경우, 회전수에 변화를 주거나 고점도 혹은 고형물이 함유된 특수액을 사용하는 방법 등이 사용된다. 특히 LNG 생산기지의 설비운영에 차질이 발생하지 않도록 하기 위해 단시간 내에 펌프의 기존 임펠러를 가공하여 필요한 성능 조건을 만족시키는 기술이 필요하다. 따라서 본 연구에서는 펌프의 기존 회전차를 가공한 3D 모델링 형상을 적용하여 ANSYS CFX 프로그램으로 유동해석을 수행하였다. 유동해석 결과와 MATLAB 프로그램의 Curve Fitting Toolbox를 활용하여 수치 해석적으로 분석하여 회전차 외경수정 이론식을 검증하였다.