• 콘크리트학회지
• /
• 제13권3호
• /
• pp.61-68
• /
• 2001

• Membrane and Water Treatment
• /
• 제6권2호
• /
• pp.103-112
• /
• 2015

In India, recycling of treated effluent plays a major role in the industry. Particularly in copper industry, recycling techniques for treated effluents adopt conventional technologies which are not energy efficient and recovery of high quality process water, free flowing salts and sludge's is very low. This paper presents an overview of enhanced modern technology for treated effluents in copper industry making it more efficient with high recovery of high quality process water and free flowing salts. Life cycle cost (LCC) would be 15-20% lower than the conventional technologies. The conventional technology can be replaced with this proposed technique in the existing and upcoming copper industries.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2010년도 춘계 학술대회 제22권1호
• /
• pp.425-426
• /
• 2010

고유동 자기충전 콘크리트와 일반 콘크리트의 균열특성을 비교 분석 하였다. 고유동 자기충전 콘크리트는 유동성 및 점성으로 인하여 콘크리트와 철근의 계면을 밀실하게 채워 부착력을 향상시킴으로 일반 콘크리트에 비해 균열에 대한 저항성이 높은 것을 알 수 있다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.99-102
• /
• 2002

This paper discusses the estimation of construction cost of high fluidity concrete using segregation reducing type superplasicizer with 350kgf/cm2 of design strength and 60$\pm$5cm of slump flow in order to verify the cost down effect of high fluidity concrete compared with that of plain concrete with 350kgf/cm2 of design strength and 18cm of slump and with 210kgf/cm2 of design strength and 15cm of slump. According to research, under same strength levels, although material cost of high fluidity concrete is somewhat higher than that of plain concrete due to segregation reducing type superplasticizer, labor cost and equipment cost of high fluidity concrete is cheaper than that of plain concrete. However, based on the strength differences, high fluidity concrete shows lower material cost, labor cost and equipment cost than that of plain concrete due to decreasing in size of member and re-bar caused by high strength development of concrete.

• 대한건축학회논문집:구조계
• /
• 제35권9호
• /
• pp.143-150
• /
• 2019

본 연구는 고무경도계인 Durometer를 사용하여 콘크리트의 표면마감 작업시간 결정과 관련있는 응결시간을 판정하는 방법에 대하여 제안하고자 하였다. 연구의 결과로 Durometer 사용시 모르타르와 콘크리트의 두가지 요소 모두에서 Proctor 관입저항기와 높은 상관성이 있는 것으로 분석되어 Durometer를 사용한다면 콘크리트의 과학적이고 정량적인 응결시간을 확인 할수 있을 것이라 판단된다. 따라서 Durometer C 타입의 경우는 초결 측정으로 40 HD로 하여 마감작업 가능 시간결정에, D 타입의 경우는 10 HD로 하여 종결시간 측정으로 마감작업의 한계시간, 양생개시 시간 확인 등에 유용하게 활용될 수 있는 것으로 판단된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.176-179
• /
• 1990

In this paper, the pheonmena of flowing electrification is experimently studied in the model transformer of a super high voltage transformer. The current of natural terminal which is flowed by the flowing electrification is increased according to oil flow, but according to the oil temperature the current is decreased and the direction of the current is changed.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.21.2-274
• /
• 1999

This study aims to examine the influence of the unit powder content of concrete and the fine aggregate ration of high flowing concrete after the improvement of grain shape of the coarse aggregate. According to the experimental results, flowbility and compating of concrete presents the best states in the S/a which has the smallest void ratio. The coarse aggregate after improvement of grain shape has been changed from 0.68 circular ratio of disc shape to 0.73 circular shape. It lead to be down 6% of fine aggregate ratio (from 47% to 41%), which is satisfactory to compacting. Also, the improvement of grain shape of the coarse aggregate lead the lowest unit powder content to be down 60kg/㎥ from (530kg/㎥ to 470kg/㎥). And about 11% unit water content can be reduced as unit powder conent is down.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.757-762
• /
• 2001

CFT concrete has high flowing, high strength and resistance to material separation to use skyscraper structure. It is considered that concrete could fill the lower part of Diaphragm up. This kinds of CFT concrete hardly apply to building below 20 stories. Using the common use strength concrete to building below 20 stories brings to reduce construction cost. This concrete is needed that valid fluidity and packing ability with unit cement content as common use strength concrete. Offering a fundamental data and proportioning in CFT concrete of below 20 stories, it is executed basic property test, analysis of proportioning and mock up test.

• Journal of Welding and Joining
• /
• 제13권4호
• /
• pp.113-121
• /
• 1995

This study deals with the quality and the optimum range of laser cutting process. Cold rolled steel sheets for automobile application were cut by a high power CO$_{2}$ laser system with beam quality of TEM$_{\infty}$ mode. Both process parameters such as travel speed and assist gas pressure, and quality factors were considered to optimize the laser cutting. It was revealed that the thinner the sheet thickness, the less effect of oxidation energy for contributing the cutting process. High speed photographs demonstrated that molten spot on the cut surface moved in a random and vigorous manner according to its viscosity and the flowing direction of assist gas, which resulted in so called striation. Laser cutting produced a very smooth surface of average roughness(Ra) about less than 1.5.mu.m at the optimum range. It was also shown that the characteristics of dross formation was influenced by the flowing durection of assist gas and the fluidity of molten metal drop..

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.247-248
• /
• 2009

고유동 콘크리트는 국내 외 시험성능 규정을 통하여 고유동 콘크리트의 슬럼프 플로 및 500mm 도달시간에 대한 실험 방법이 제시되었다. 하지만 고유동 콘크리트의 유동성능 측정 방법인 슬럼프 플로 시험방법은 사람 개개인 마다 인식 하는 능력이 상이함에 따라 오차가 발생한다. 본 연구에서는 이러한 실험방법에 대한 오차를 보다 정밀화하기 위하여 레이져 다이오드를 통한 실험값의 오차를 없애고자 한다.