• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.6
• /
• pp.189-196
• /
• 1996

We have studied sngle-frequency yield of 1.55${\mu}$m DFB lasers with uniform sinusoidal grating using an effective index transfer matrix method considering both threshold gain difference and spatial hole-burning effect. Optimum grating height and mirror reflectivities that maximize the single-frequency yield are found for a low-reflection (LR)/high-reflection(HR) mirror structure and a LR/as-cleaved miror structure for an assumed basic waveguide structure. LR/HR structure has a high yield of about 80% in a narrow range of grating height while LR/as-cleaved mirror structure has a low yield of about 50% in a relatively wide range of grating height. The effect of the low-reflection facet reflectivity is also studied.

• Structural Engineering and Mechanics
• /
• v.58 no.4
• /
• pp.661-676
• /
• 2016

This paper presents an elastic/plastic model that neglects strain hardening during loading, but accounts for the Bauschinger effect. These mathematical features of the model represent reasonably well the actual behavior of several materials such as high strength steels. Previous attempts to describe the behavior of this kind of materials have been restricted to a class of boundary value problems in which the state of stress in the plastic region is completely controlled by the yield stress in tension or torsion. In particular, the yield stress is supposed to be constant during loading and the forward plastic strain reduces the yield stress to be used to describe reversed yielding. The new model generalizes this approach on plane stress problems assuming that the material obeys the von Mises yield criterion during loading. Then, the model is adopted to describe reversed yielding in thin hollow discs subject to external pressure.

• Journal of Environmental Science International
• /
• v.22 no.2
• /
• pp.235-242
• /
• 2013

The purpose of this article is analyzing the impacts of climate change on winter chinese cabbage yield in Korea, with employing a panel data regression model. Our results show that there is a negative impacts of high temperature and precipitation amount on winter chinese cabbage yields. Especially high temperature and rainfall in September cause serious damage to winter chinese cabbage yield. According to the reduction schedule on greenhouse gas emission(RCP 4.5 scenario.), winter chinese cabbage yield would be 7.7% lower than it is, for reasons of high temperature and rainfall damages by the end of 21st century.

• Steel and Composite Structures
• /
• v.18 no.6
• /
• pp.1517-1539
• /
• 2015

Eccentrically braced frames (EBFs) often use conventional steel with medium yield strength. This system requires structural members with large cross-sections for well seismic behavior, which leads to increased material costs. In eccentrically braced frames with high strength steel combination (HSS-EBFs), links use Q345 steel (specified nominal yield strength 345 MPa), braces use Q345 steel or high strength steel while other structural members use high strength steel (e.g., steel Q460 with the nominal yield strength of 460 MPa or steel Q690 with the nominal yield strength of 690 MPa). For this approach can result in reduced steel consumption and increased economic efficiency. Several finite element models of both HSS-EBFs and EBFs are established in this paper. Nonlinear hysteretic analyses and nonlinear time history analyses are conducted to compare seismic performance and economy of HSS-EBFs versus EBFs. Results indicate that the seismic performance of HSS-EBFs is slightly poorer than that of EBFs under the same design conditions, and HSS-EBFs satisfy seismic design codes and reduce material costs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.4
• /
• pp.1-9
• /
• 2001

The soot yield has been studied by a premixed propane-oxygen-inert gas combustion in a specially designed disk-type constant-volume combustion chamber to investigate the effects of pressure, temperature and turbulence on soot formation. Premixtures are simultaneously ignited by eight spark plugs located on the circumference of chamber at 45 degree intervals in order to observe the soot formation under high pressures. The eight flames converged compress the end gases to a high pressure. The laser schlieren and direct flame photographs for observation field with 10 mm in diameter are taken to examine into the behaviors of flame front and gas flow in laminar and turbulent combustion. The soot volume fraction in the chamber center during the final stage of combustion at the highest pressure is measured by the in situ laser extinction technique and simultaneously the corresponding burnt gas temperature by the two-color pyrometry method. The pressure and temperature during soot formation are changed by varying the initial charge pressure and the volume fraction of inert gas compositions, respectively. It is found that the soot yield increases with dropping temperature and rising pressure at constant equivalence ratio, and that the soot yield of turbulent combustion decreases in comparison with that of laminar combustion because the burnt gas temperature increases with the drop of heat loss.

• KSBB Journal
• /
• v.29 no.1
• /
• pp.22-28
• /
• 2014

In this study, we investigate the effect of pretreatment method on lipid extraction from Enteromorpha intestinalis using physical, thermo-chemical, and enzymatic process such as ultrasonication, high temperature treatment, freezing, microwave irradiation, osmotic shock, pH shock, homogenizing, and enzymatic treatment. In pretreatment with separated lipid extraction, the high extraction yield was obtained by high temperature treatment ($121^{\circ}C$ for 5 min) with 0.1 N HCl, which is 1.4 times higher than that of control. In pretreatment with direct lipid extraction, the high extraction yields were obtained by 0.1 N HCl pretreatment, microwave irradiation (700W, 1 min with twice), and 10% NaCl pretreatment, which is 1.45 times higher than that of control. In the result of enzymatic pretreatment with 17 kinds of enzymes, Cellic CTec II showed the high extraction yield of 5.3%, and which is 1.9 times higher than that of control. Moreover, the extraction yield was increased by the increase of enzyme amounts. In 10% enzyme amount, about 5.8% yield was obtained.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.37 no.5 s.113
• /
• pp.41-49
• /
• 2005

This paper deals the effect of anthraquinone (AQ) on the contribution of sulphidity in kraft pulping of sapwood. The pulping conditions namely- active alkali concentration, pulpingtime, temperature and liquor ratio were varied in low ($15\%$) and high ($30\%$) sulphidity. $0.1\%$ AQ was added in the low and high sulphidity pulping with varying active alkali concentration and cooking time. At optimum conditions, low sulphidity kraft process produced about $44\%$ pulp yield with kappa number of about 23. But in high sulphidity kraft process kappa number was reduced to about 20 at the same yield. An addition of AQ reduced alkali requirement by $2\%$ on oven dried raw material and cooking time by 1 hour to produce pulp yield of about $44\%$ at kappa number 20. AQ is more effective in low sulphidity pulping than the high sulphidity pulping. The breaking length of kraft-AQ pulp was slightly higher than that of kraft pulp.

• Nuclear Engineering and Technology
• /
• v.49 no.3
• /
• pp.569-575
• /
• 2017

One of the important requirements for the application of reduced-activation ferritic/martensitic (RAFM) steel is to retain proper mechanical properties under irradiation and high-temperature conditions. To simulate the yield strength and stress-strain curve of steels during high-temperature and irradiation conditions, a multiscale simulation method consisting of both microstructure and strengthening simulations was established. The simulation results of microstructure parameters were added to a superposition strengthening model, which consisted of constitutive models of different strengthening methods. Based on the simulation results, the strength contribution for different strengthening methods at both room temperature and high-temperature conditions was analyzed. The simulation results of the yield strength in irradiation and high-temperature conditions were mainly consistent with the experimental results. The optimal application field of this multiscale model was 9Cr series (7-9 wt.%Cr) RAFM steels in a condition characterized by 0.1-5 dpa (or 0 dpa) and a temperature range of $25-500^{\circ}C$.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.1
• /
• pp.69-74
• /
• 1996

This experiment was carried out to investigate to adaptability of forage rape(Brassica napus oleifera) and the determine its proper sowing time for a second cropping on the fallow field after sweet corn yield in the Hongchon area The forage rape, Ramon was sown at intervals of about ten days given eight different sowing times as treatments the early August to the middle October 1988. Plant height and DM yield were significantly higher for the early August(P<0.05) than for the other sowing times. Crude protein contents of the early August, mid August, mid September and late September were higher(P<0.05) 26.5, 24.3, 27.1 and 30.9% as much as that of the late August(l4.9%), respectively. Sowing time having high content of crude fiber shown low content of crude protein. Yields of crude protein were 3.52, 2.36, IAltha in the early, mid and late August, respectively. The highest crude protein yield was shown in the early August(P<0.05). Crude fiber yield was higher in early, mid and late August than in the other sowing times. These results indicate that forage rape sown in the early August as a second cmpping on the fallow field after sweet corn yield in Hongchon area, could be used as the high quality forage.

• Earthquakes and Structures
• /
• v.12 no.2
• /
• pp.201-211
• /
• 2017

This paper experimentally investigates the effect of yield strength of reinforcing bars and stirrups on the seismic performance of reinforced concrete (RC) circular piers. Reversed cyclic loading tests of nine-large scale specimens with longitudinal and transverse reinforcement of different yield strengths (varying between HRB335, HRB500E and HRB600 rebars) were conducted. The test parameters include the yield strength and amount of longitudinal and transverse reinforcement. The results indicate that the adoption of high-strength steel (HSS) reinforcement HRB500E and HRB600 (to replace HRB335) as longitudinal bars without reducing the steel area (i.e., equal volume replacement) is found to increase the moment resistance (as expected) and the total deformation capacity while reducing the residual displacement, ductility and energy dissipation capacity to some extent. Higher strength stirrups enhance the ductility and energy dissipation capacity of RC bridge piers. While the product of steel yield strength and reinforcement ratio ($f_y{\rho}_s$) is kept constant (i.e., equal strength replacement), the piers with higher yield strength longitudinal bars are found to achieve as good seismic performance as when lower strength bars are used. When higher yield strength transverse reinforcement is to be used to maintain equal strength, reducing bar diameter is found to be a better approach than increasing the tie spacing.