• Journal of The Korean Society of Grassland and Forage Science
• /
• v.25 no.4
• /
• pp.297-306
• /
• 2005

This study was conducted to compare and evaluate fermentable and nutritional characteristics of brewery meal-based fermented feedstuffs supplemented with Aspergillus oryzae (AO) and Saccharomyces cerevisiae (SC). Experiments were divided into three treatment groups; fermented feedstuff supplemented with $1\%$ of AO(FFAO), fermented feedstuff supplemented with $1\%$ of SC(FFSC), and fermented feedstuff supplemented with $0.5\%$ of AO and $0.5\%$ of SC(FFAS). For changes of crude protein contents by 48 h fermentation, there were no significant differences among treatments. Ether extract(EE) contents were significantly increased by 48 h fermentation (p<0.05). Neutral detergent fiber(NDF) contents of FFAO, FFSC and FFAS were significantly decreased by 48 h fermentation(p<0.05), but acid detergent fiber(ADF) and acid detergent lignin (ADL) contents were not different. The pH of FFAO and FFAS was decreased more rapidly than that of FFSC(p<0.05), reaching a plateau after 24 h. Alcohol content was increased rapidly until 18 h in FFAO and was increased rapidly until 12 h in FFSC and FFAS, and alcohol content of FFAO, FFSC and FFAS was maintained constantly after 24 h. The ammonia N content of FFAO, FFSC and FFAS was 0.022, 0.073 and $0.040\%$ at 48 h, respectively, and then ammonia N was over twice higher in FFSC than in FFAO and FFAS(p<0.05). Dextrose content was increased until 6 h in FFAO but was rapidly decreased in FFSC and FFAS until 6 h(p<0.05). Lactate content was higher in FFAO and FFAS than in FFSC(p<0.05). Consequently, when we added AO in formulation of fermented feedstuff with brewery meal which moisture content was high, EE, alcohol, and lactate contents were increased, but NDF and ammonia N contents were reduced. Therefore, it is expected that AO will be effective to increase the feed value and the preservation of fermented feedstuff with a high moisture content.

• Applied Chemistry for Engineering
• /
• v.31 no.2
• /
• pp.115-124
• /
• 2020

Sustainable plastics can be mainly categorized into (1) biodegradable plastics decomposed into water and carbon dioxide after use, and (2) biomass-derived plastics possessing the carbon neutrality by utilizing raw materials converted from atmospheric carbon dioxide to biomass. Recently, biomass-derived engineering plastics (EP) and natural nanofiber-reinforced nanocomposites are emerging as a new direction of the industry. In addition to the eco-friendliness of natural resources, these materials are competitive over petroleum-based plastics in the high value-added plastics market. Polyesters and polycarbonates synthesized from isosorbide and 2,5-furandicarboxylic acid, which are representative biomass-derived monomers, are at the forefront of industrialization due to their higher transparency, mechanical properties, thermal stability, and gas barrier properties. Moreover, isosorbide has potential to be applied to super EP material with continuous service temperature over 150 ℃. In situ polymerization utilizing surface hydrophilicity and multi-functionality of natural nanofibers such as nanocellulose and nanochitin achieves remarkable improvements of mechanical properties with the minimal dose of nanofillers. Biomass-derived tough-plastics covered in this review are expected to replace petroleum-based plastics by satisfying the carbon neutrality required by the environment, the high functionality by the consumer, and the accessibility by the industry.

• Journal of Life Science
• /
• v.28 no.11
• /
• pp.1339-1346
• /
• 2018

In Korea, edible mushrooms are produced largely on commercial artificial media, so the annual production of spent mushroom substrate (SMS), as a by-product of the mushroom industry, is estimated at over 200 million tons. This SMS is assumed to contain abundant fungal mycelia and pre-fruiting bodies, as well as various nutritive and bioactive compounds that are presently discarded. This study examined the physico-chemical, nutritional, and enzymatic characteristics of uninoculated sterilized medium (USM) and SMS of shiitake mushrooms with the aim of developing a high-value added product from SMS. The contents of crude protein, crude lipid, and ash were higher after the third SMS harvest ($SMS-A-3^{rd}$) than in USM or $SMS-A-1^{st}$. The contents of Ca, Mg, and P in $SMS-A-3^{rd}$ were 2.95, 2.35, and 2.1-fold higher compared than in USM. No As or Cd was detected in USM or SMS. The pH, Brix, and acidity were 4.6, 20.0, and 1.4, respectively in $SMS-A-3^{rd}$, but 5.6, 6.0, and 0.0, respectively, in USM. These results suggest a highly active production of soluble components and organic acids in $SMS-A-3^{rd}$. The distinct color differences noted for USM, $SMS-A-1^{st}$, and $SMS-A-3^{rd}$ could be used as a mycelial growth indicator. Enzyme activity assays using the APIZYM system showed that SMS is a potent source of hydrolysis-related enzymes, especially esterase (C4) and ${\beta}$-glucuronidase. Our results suggested that the SMS of shiitake has a high potential for use in environmental, agricultural, and stock-breeding industries, for example, as active ingredients for sewage treatment, waste-polymer degradation, and feed additives.

• KIPS Transactions on Computer and Communication Systems
• /
• v.10 no.10
• /
• pp.261-268
• /
• 2021

Cloud computing is a computing paradigm in which users can utilize computing resources in a pay-as-you-go manner. In a cloud system, resources can be dynamically scaled up and down to the user's on-demand so that the total cost of ownership can be reduced. The Modeling and Simulation (M&S) technology is a renowned simulation-based method to obtain engineering analysis and results through CAE software without actual experimental action. In general, M&S technology is utilized in Finite Element Analysis (FEA), Computational Fluid Dynamics (CFD), Multibody dynamics (MBD), and optimization fields. The work procedure through M&S is divided into pre-processing, analysis, and post-processing steps. The pre/post-processing are GPU-intensive job that consists of 3D modeling jobs via CAE software, whereas analysis is CPU or GPU intensive. Because a general-purpose desktop needs plenty of time to analyze complicated 3D models, CAE software requires a high-end CPU and GPU-based workstation that can work fluently. In other words, for executing M&S, it is absolutely required to utilize high-performance computing resources. To mitigate the cost issue from equipping such tremendous computing resources, we propose HEMOS-Cloud service, an integrated cloud and cluster computing environment. The HEMOS-Cloud service provides CAE software and computing resources to users who want to experience M&S in business sectors or academics. In this paper, the economic ripple effect of HEMOS-Cloud service was analyzed by using industry-related analysis. The estimated results of using the experts-guided coefficients are the production inducement effect of KRW 7.4 billion, the value-added effect of KRW 4.1 billion, and the employment-inducing effect of 50 persons per KRW 1 billion.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.2
• /
• pp.200-211
• /
• 2022

The celadon stools with an openwork ring design which consist of four items as one collection were excavated from Gaeseong, Gyeonggi-do Province. The celadon stools were designated and managed as treasures due to their high arthistorical value in the form of demonstrating the excellence of celadon manufacturing techniques and the fanciful lifestyles during the Goryeo Dynasty. However, one of the items, which appeared to have been repaired and restored in the past, suffered a decline in aesthetic value due to the aging of the treatment materials and the lack of skill on the part of the conservator, raising the need for re-treatment as a result of structural instability. An examination of the conservation condition prior to conservation treatment found structural vulnerabilities because physical damage had been artificially inflicted throughout the area that was rendered defective at the time of manufacturing. The bonded surfaces for the cracked areas and detached fragments did not fit, and these areas and fragments had deteriorated because the adhesive trickled down onto the celadon surface or secondary contaminants, such as dust, were on the adhesive surface. The study identified the position, scope, and conditions of the bonded areas at the cracks UV rays and microscopy in order to investigate the condition of repair and restoration. By conducting Fourier-transform infrared spectroscopy(FT-IR) and portable x-ray fluorescence spectroscopy on the materials used for the former conservation treatment, the study confirmed the use of cellulose resins and epoxy resins as adhesives. Furthermore, the analysis revealed the addition of gypsum(CaSO₄·2H₂O) and bone meal(Ca₁₀ (PO₄)₆(OH)₂) to the adhesive to increase the bonding strength of some of the bonded areas that sustained force. Based on the results of the investigation, the conservation treatment for the artifact would focus on completely dismantling the existing bonded areas and then consolidating vulnerable areas through bonding and restoration. After removing and dismantling the prior adhesive used, the celadon stool was separated into 6 large fragments including the top and bottom, the curved legs, and some of the ring design. After dismantling, the remaining adhesive and contaminants were chemically and physically removed, and a steam cleaner was used to clean the fractured surfaces to increase the bonding efficacy of the re-bonding. The bonding of the artifact involved applying the adhesive differently depending on the bonding area and size. The cyanoacrylate resin Loctite 401 was used on the bonding area that held the positions of the fragments, while the acrylic resin Paraloid B-72 20%(in xylene) was treated on cross sections for reversibility in the areas that provided structural stability before bonding the fragments using the epoxy resin Epo-tek 301-2. For areas that would sustain force, as in the top and bottom, kaolin was added to Epo-tek 301-2 in order to reinforce the bonding strength. For the missing parts of the ring design where a continuous pattern could be assumed, a frame was made using SN-sheets, and the ring design was then modeled and restored by connecting the damaged cross section with Wood epos. Other restoration areas that occurred during bonding were treated by being filled with Wood epos for aesthetic and structural stabilization. Restored and filled areas were color-matched to avoid the feeling of disharmony from differences of texture in case of exhibitions in the future. The investigation and treatment process involving a variety of scientific technology was systematically documented so as to be utilized as basic data for the conservation and maintenance.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.13
• /
• pp.869-895
• /
• 2000

The US supports the Information and Communication (IC) industry as a strategic one to wield a complete power over the World Market. However, several other countries are also eager to have the support for the IC industry because the industry produces a high added value and has a significant effect on other industries. Korea is not an exception. Korea recently succeeded in the commercialization of CDMA for the first time in the world, after the successful development of TDX. Hence, it is highly likely to get tracked by the US. Although the IC industry is a specific sector of IT, there is a concern that there might be a trade friction between the US and Korea due to a possible competition. It will be very important to prepare a solution in advance so that Korea could prevent the friction and at the same time increase its share domestically and globally. It will be our important task to solve the problem with the minimum cost if the conflict arises unfortunately in the IT area. The parties that have a strong influence on the US trade policy are the think tank group and the IT-related interest group. Therefore, it would be important to have a close relationship with them. We found some implications by analyzing the case of Japan, which has experienced trade frictions with the US over the long period of time in the high tech industry. In order to get rid of those conflicts with the US, the Japanese did the following things : (1) The Japanese government developed supporting theories and also resorted to international support so that the world could support the Japanese theories. (2) Through continual dialogue with the US business people, the Japanese business people sought after solutions to share profits among the Japanese and the US both in the domestic and in the worldwide markets. They focused on lobbying activities to influence the US public opinion to support the Japanese. The specific implementation plan was first to open culture lobby toward opinion leaders who were leaders about the US opinion. The institution, Japan Society, were formed to deliver a high quality lobbying activities. The second plan is economic lobby. They have established Japanese Economic Institute at Washington. They provide information about Japan regularly or irregularly to the US government, research institution, universities, etc., that are interested in Japan. The main objective behind these activities though is to advertise the validity of Japanese policy. Japanese top executives, practical interest groups on international trade, are trying to justify their position by direct contact with the US policy makers. The third one is political lobby. Japan is very careful about this political lobby. It is doing its best not to give impression that Japan is trying to shape the US policy making. It is collecting a vast amount of information to make a correct judgment on situation. It is not tilted toward one political party or the other, and is rather developing a long-term network of people who understand and support the Japanese policy. The following implications were drawn from the experience of Japan. First, the Korean government should develop a long-term plan and execute it to improve the Korean image perceived by American people. Second, the Korean government should begin public relation activities toward the US elite group. It is inevitable to make an effort to advertise Korea to this elite group because this group leads public opinion in the USA. Third, the Korean government needs the development of a relevant policy to elevate the positive atmosphere for advertising toward the US. For example, we need information about to whom and how to about lobbying activities, personnel network who immediately respond to wrong articles about Korea in the US press, and lastly the most recent data bank of Korean support group inside the USA. Fourth, the Korean government should create an atmosphere to facilitate the advertising toward the US. Examples include provision of incentives in tax on the expenses for the advertising toward the US and provision of rewards to those who significantly contribute to the advertising activities. Fifth, the Korean government should perform the role of a bridge between Korean and the US business people. Sixth, the government should promptly analyze the policy of IT industry, a strategic area, and timely distribute information to industries in Korea. Since the Korean government is the only institution that has formal contact with the US government, it is highly likely to provide information of a high quality. The followings are some implications for business institutions. First, Korean business organization should carefully analyze and observe the business policy and managerial conditions of US companies. It is very important to do so because all the trade frictions arise at the business level. Second, it is also very important that the top management of Korean firms contact the opinion leaders of the US. Third, it is critically needed that Korean business people sent to the USA do their part for PR activities. Fourth, it is very important to advertise to American employees in Korean companies. If we cannot convince our American employees, it would be a lot harder to convince regular American. Therefore, it is very important to make the American employees the support group for Korean ways. Fifth, it should try to get much information as early as possible about the US firms policy in the IT area. It should give an enormous effort on early collection of information because by doing so it has more time to respond. Sixth, it should research on the PR cases of foreign enterprise or non-American companies inside the USA. The research needs to identify the success factors and the failure factors. Finally, the business firm will get more valuable information if it analyzes and responds to, according to each medium.

• Korean Journal of Food Science and Technology
• /
• v.48 no.2
• /
• pp.178-186
• /
• 2016

The present study was conducted to investigate the effect of whole wheat bread with added Lindera obtusiloba (LO) and Capsosiphon fulvescens (CF) ethanol extracts on serum glucose and lipid levels in Sprague Dawley rats. Rats were divided into five groups depending on the diet administered: normal bread (NC), whole wheat bread (W), whole wheat bread with LO leaves extract (WL), whole wheat bread with CF extract (WC), and whole wheat bread with freeze-drying CF (WDC). After 4 weeks of consuming the experimental diet, the blood glucose level and hemoglobin A1c contents were found to be significantly lower in the W, WL, WC, and WDC groups than in the NC group. The high-density lipoprotein-cholesterol levels increased in the WL group when compared to those in the NC group and triglycerides levels decreased in all wheat groups compared to those in the NC group. These results suggest that wheat breads containing LO and CF extracts are effective for preventing hypercholesterolemia and obesity.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.790-798
• /
• 2014

The nutritional compositions and antioxidative activities of the Kimcheon lowbush and Pyungtaek highbush blueberries cultivated in South Korea were investigated. The approximate compositions, pH, and soluble-solid and mineral contents of P, Ca, Mg, Na, and Zn were determined. Both blueberry cultivars had mainly fructose and glucose as free sugars while disaccharides such as sucrose, maltose, and lactose were not detected in both. Oleic, linoleic, and linolenic fatty acids were the major fatty acids in both types of blueberries. The total of 16 free amino acids, including seven essential and nine non-essential amino acids, were higher in the Pyungtaek highbush blueberry. Among the amino acids, arginine was especially much higher in the Pyungtaek highbush blueberry. The anthocyanin, resveratrol, and polyphenol compounds, which are the important biologically active compounds in blueberries, were found. The anthocyanin contents of the Kimcheon lowbush and Pyungtaek highbush blueberries were 22.0 and 18.1 mg/100 g, respectively; the resveratrol contents by HPLC, 0.12 and 0.11 mg/100 g; and the total polyphenol contents, 141.3 and 138.4 mg/100 g. The electron-donating ability determined based on the DPPH radical scavenging activity was increased in a concentration-dependent manner, and it was higher than that of the Pyungtaek highbush blueberries, which implies that it is highly correlated with the higher amounts of total polyphenol, anthocyanin, and resveratrol in it. In conclusion, the two varieties of Korean blueberries can be suggested as potential sources of high-value-added functional foods.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.45 no.5
• /
• pp.680-689
• /
• 2016

The present study evaluated the validation method for isoflavone contents of fermented soybean extracts by bioconversion as well as their antioxidant activities. Our results show that the total isoflavone contents of non-fermented and fermented soybean extract ranged between 119.8 to $637.7{\mu}g/g$ and between 567.3 to $2,074.6{\mu}g/g$, respectively. Moreover, fermented soybean extracts had higher contents of isoflavone aglycones, including daidzein, glycitein, and genistein than non-fermented soybean extracts as well as lower contents of isoflavone glucosides such as daidzin, glycitin, and genistin. FRAP and ORAC values ranged between 0.15 to 0.22 and between 195.24 to $753.79{\mu}M$ Trolox equivalents/g in non-fermented and fermented soybean extracts, respectively. These results indicate that fermented soybean extracts had higher total isoflavone contents and antioxidant activities than non-fermented soybean extracts. Bioconversion process in this study may have the potential to produce isoflavone-enriched natural antioxidant agents with high added value from soybean matrices.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.4
• /
• pp.550-556
• /
• 2014

Rice bran contains both excellent nutritional value and functional advantages. Its utilization is limited due to reducing texture and low storage. To satisfy various tastes, Bacillus spp. having high amylase and protease activities were selected. Using the strains, we made whole grain soybean Meju with a reduced manufacturing period by increasing the concentration of total nitrogen. We made soy sauces with mashing ratios of soy bean and rice bran at 10:0, 9:1, 7:3, and 5:5, and then compared their physiochemical properties. After 2 weeks of fermentation, the sugar content increased from 21~22% to 30~32%. However, pH and salinity showed no differences. At a ratio of 9:1, total nitrogen, amino nitrogen content, and total free amino acid contents were the highest at 1.62%, 652.52 mg%, and 8,804.03 mg/kg, respectively, compared to other mashing ratios of soy bean and rice bran. Especially, the contents of aspartic and glutamic acid, which increase delicate flavoring, were higher in our soy sauce compared to those of general traditional soy sauce and brewed soy sauce, which were 504.25 and 1,262.25 mg/kg, respectively. Serine and alanine, which are related to sweet taste, were present at 49.50 and 518.75 mg/kg, respectively, which were the highest among all mixing ratios, at a ratio of 9:1. Compared to general traditional soy sauce and brewed soy sauce, the contents of histamine and tyramine among biogenic amines decreased to 35.85 and 41.04 mg/kg, respectively. Finally, a soy bean and rice bran mixing ratio of 9:1 was determined to be the optimal mixing ratio in the sensory evaluation.