• Korean Chemical Engineering Research
• /
• v.61 no.1
• /
• pp.1-7
• /
• 2023

Gas separation technology becomes more useful because key gases such as H₂ and CO₂ regarding renewable energy resources and environmental pollutant can be effectively extracted in mixed gases. For reducing energy consumption on gas separation, membrane and adsorption processes are widely used. In both processes, porous materials are needed as membrane and adsorbent. In particular, metal-organic frameworks (MOFs), one class of the porous materials, have been developed for the purpose of gas adsorption and separation. While the number of the MOF structures is increasing due to chemical and structural tunability, good MOF membranes and adsorbents have been rarely reported by trial-and-error experiments. To accelerate the discovery of high-performing porous materials that can separate H₂ and CO₂, a high-throughput computational screening technique was used as efficient skill. This review introduces crucial studies of porous materials and the high-throughput computational screening works focusing on gas separation of H₂ and CO₂.

• Journal of Communications and Networks
• /
• v.17 no.1
• /
• pp.58-66
• /
• 2015

Aeronautical communication networks (ACN) is an emerging concept in which aeronautical stations (AS) are considered as a part of multi-tier network for the future wireless communication system. An AS could be a commercial plane, helicopter, or any other low orbit station, i.e., Unmanned air vehicle, high altitude platform. The goal of ACN is to provide high throughput and cost effective communication network for aeronautical applications (i.e., Air traffic control (ATC), air traffic management (ATM) communications, and commercial in-flight Internet activities), and terrestrial networks by using aeronautical platforms as a backbone. In this paper, we investigate the issues about connectivity, throughput, and delay in ACN. First, topology of ACN is presented as a simple mobile ad hoc network and connectivity analysis is provided. Then, by using information obtained from connectivity analysis, we investigate two communication models, i.e., single-hop and two-hop, in which each source AS is communicating with its destination AS with or without the help of intermediate relay AS, respectively. In our throughput analysis, we use the method of finding the maximum number of concurrent successful transmissions to derive ACN throughput upper bounds for the two communication models. We conclude that the two-hop model achieves greater throughput scaling than the single-hop model for ACN and multi-hop models cannot achieve better throughput scaling than two-hop model. Furthermore, since delay issue is more salient in two-hop communication, we characterize the delay performance and derive the closed-form average end-to-end delay for the two-hop model. Finally, computer simulations are performed and it is shown that ACN is robust in terms of throughput and delay performances.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.spc1
• /
• pp.269-273
• /
• 2006

The study of molecular markers to improve crops largely depends on the availability of rapid and of efficient DNA extraction methods. Here we developed a cheap and convenient method to isolate genomic DNA from rice grains suitable for large-scale microsatellite analysis. We confirmed that the isolated rice DNA is suitable for PCR analysis with STS marker and SNP marker, as well as microsatellite marker. Further, we established high-throughput DNA extraction system in a 96-well plate format which make it possible high-throughput analysis of microsatellite markers with rice grains. This implies that the new method could be a useful tool for other types of marker analysis in large scale.

• Journal of Life Science
• /
• v.18 no.9
• /
• pp.1312-1315
• /
• 2008

High throughput-drug screening plays a pivotal role for early stage of drug discovery process. In the course of assay development for screening of cell death-inducing agents, a protocol that is simple, time-saving, and high throughput-compatible was designed which was confirmed that the protocol can be worked by a HTS-compatible machine. In 96-well format, PC-3 cancer cells (1${\times}10^{4}$ cells/ml) were cultured for 24 hr. After 24 h-incubation with various medicinal plants extracts, the cells were then stained with DAPI for 30 min. The fluorescence intensity of the stained cells was measured semi-automatically with a multilabel counter. To test whether the present assay system effectively works, we screened about 850 medicinal plant extracts, and selected 1 positive crude extracts that contained cell death-inducing activity. These results suggest that the protocol is highly amenable to HTS implementation for a cell death-inducing agent(s).

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.7
• /
• pp.9-16
• /
• 2011

In this paper, various kinds of high throughput turbo decoding schemes are introduced, and a new turbo decoding scheme using the advantages of each scheme is proposed. The proposed scheme uses the decoding structure of double flow scheme, sliding window scheme and shuffled turbo decoding scheme. Simulation results show that the proposed scheme offers a BER performance equivalent to those of existing turbo decoding schemes with less clock cycles. We also show that the required memory can be reduced by choosing proper size of sliding window. Consequently, we can design a high throughput turbo decoder requiring low power and low area.

• Mass Spectrometry Letters
• /
• v.4 no.2
• /
• pp.25-29
• /
• 2013

Proteomics for biomarker validation needs high throughput instrumentation to analyze huge set of clinical samples for quantitative and reproducible analysis at a minimum time without manual experimental errors. Sample preparation, a vital step in proteomics plays a major role in identification and quantification of proteins from biological samples. Tryptic digestion a major check point in sample preparation for mass spectrometry based proteomics needs to be more accurate with rapid processing time. The present study focuses on establishing a high throughput automated online system for proteolytic digestion and desalting of proteins from biological samples quantitatively and qualitatively in a reproducible manner. The present study compares online protein digestion and desalting of BSA with conventional off-line (in-solution) method and validated for real time sample for reproducibility. Proteins were identified using SEQUEST data base search engine and the data were quantified using IDEALQ software. The present study shows that the online system capable of handling high throughput samples in 96 well formats carries out protein digestion and peptide desalting efficiently in a reproducible and quantitative manner. Label free quantification showed clear increase of peptide quantities with increase in concentration with much linearity compared to off line method. Hence we would like to suggest that inclusion of this online system in proteomic pipeline will be effective in quantification of proteins in comparative proteomics were the quantification is really very crucial.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.10
• /
• pp.1460-1468
• /
• 2015

As the number of IoT service increases, the interest of lightweight block cipher algorithm, which consists of simple operations with low-power and high speed, is growing. LEA(Leightweight Encryption Algorithm) is recently adopted as one of lightweight encryption standards in Korea. In this paper a pipeline LEA architecture is proposed to process large amounts of data with high throughput. The proposed pipeline LEA can communicate with external modules in the 32-bit I/O interface. It consists of input, output and encryption pipeline stages which take 4 cycles using a muti-cycle pipeline technique. The experimental results showed that the proposed pipeline LEA achieved more than 7.5 Gbps even though the key length was varied. Compared with the previous high speed LEA in accordance with key length of 128, 192, and 256 bits, the throughput of the pipeline LEA was improved 6.45, 7.52, and 8.6 times. Also the throughput per area was improved 2, 1.82, and 2.1 times better than the previous one.

• Journal of Microbiology and Biotechnology
• /
• v.32 no.8
• /
• pp.1026-1033
• /
• 2022

This study presents a novel DNA part characterization technique that increases throughput by combinatorial DNA part assembly, solid plate-based quantitative fluorescence assay for phenotyping, and barcode tagging-based long-read sequencing for genotyping. We confirmed that the fluorescence intensities of colonies on plates were comparable to fluorescence at the single-cell level from a high-end, flow-cytometry device and developed a high-throughput image analysis pipeline. The barcode tagging-based long-read sequencing technique enabled rapid identification of all DNA parts and their combinations with a single sequencing experiment. Using our techniques, forty-four DNA parts (21 promoters and 23 RBSs) were successfully characterized in 72 h without any automated equipment. We anticipate that this high-throughput and easy-to-use part characterization technique will contribute to increasing part diversity and be useful for building genetic circuits and metabolic pathways in synthetic biology.

• Journal of Korea Multimedia Society
• /
• v.23 no.2
• /
• pp.227-240
• /
• 2020

This paper proposes a novel CTC technology, CB-sense. The CB-sense guarantees a dedicated period for the CTC that results in low duty cycle of the receiver device. In addition, it send a lot of information explosively during the dedicated CTC period. Thus, it can achieve high throughput. The CB-sense uses Clear to Send (CTS) packets to transmit information bits to the heterogeneous wireless technologies. The CTS packets block the neighboring node transmissions, so it reduces co-channel interference. In experiment results, CB-sense represents 20 times more throughput than FreeBee and below 5% symbol error rate in the interference environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.34-43
• /
• 2007

In the IEEE 802.15.3 Medium Access Control (MAC) protocol, Simultaneously Operating Piconets (SOPs) are linked by the parent/child (P/C) or parent/neighbor (P/N) configuration, which work on a Time Division Multiple Access (TDMA) basis. This provides interference mitigation but the overall throughput is limited because the SOPs share the channel time exclusively. The protocol is not efficient for SOPs if we focus on the combination of interference mitigation and high throughput maintenance. In this paper Public Channel Time Allocation (Public CTA) is proposed, which is able to greatly reduce the inter-piconet interference (IPI) and achieve greater throughput without much loss of link success probability (LSP) in the SOPs. The simulation results based on the SOPs of Direct Sequence Ultra Wideband (DS-UWB) system demonstrate that the proposed scheme effectively supports the coexistence of SOPs, and it can not only significantly improve the overall throughput of SOPs but also maintain high LSP.