• 생명과학회지
• /
• 제16권2호
• /
• pp.225-230
• /
• 2006

생육온도가 느타리버섯 자실체의 생육 및 조직에 미치는 영향을 검토하기 위하여 온도를 $7^{\circ}C,\;15^{\circ}C,\;23^{\circ}C$로 달리하여 생육시키고, 자실체의 특성 및 조직의 미세구조 변화를 관찰 한 결과, 생육온도가 높을수록 갓의 두께는 얇아지고, 대의 두께 및 대의 길이는 길어졌으며, 버섯의 갓 색깔이 백색에 가깝게 변화하였다. 생육온도에 따른 자실체의 미세구조변화는 생육온도가 높아질수록 주름에 있어서 담자포자의 비산이 빠르고, 노화현상이 두드러졌다. 생육온도별로 느타리버섯 대부위의 물리적 특성을 조사한 결과 생육온도가 높을수록 경도는 낮아졌는데 이는 세포의 노화 및 균사의 밀도가 낮았기 때문으로 생각된다. 또한 대의 세포학적인 특정으로 액포화가 두드러져 생육온도가 높을수록 생육일수는 빨라지나 그만큼 노화가 쉽게 일어남을 확인하였다.

• 대한토목학회논문집
• /
• 제35권1호
• /
• pp.77-84
• /
• 2015

고온에 노출된 GFRP 보강근의 인장실험을 수행하였다. 본 실험을 위한 고온노출조건은 $200^{\circ}C$ 이하의 온도에 3분간 노출하는 것으로 하였다. 이러한 조건은 다른 연구자들의 시험에서 적용한 고온노출조건과 비교하여 경미한 고온노출조건이다. 고온에서와 고온노출 후 GFRP 보강근의 인장강도와 탄성계수를 비교하였다. 실험결과, 고온에서 GFRP 보강근의 인장성능이 감소하는 것으로 나타났으나, 고온노출 후 보강근의 인장성능은 거의 고온노출전의 수준으로 회복되는 것으로 나타났다. 이와 같은 결과는 화재로 손상 받은 GFRP 보강 콘크리트 구조물의 평가를 위하여 중요한 자료가 된다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.170-171
• /
• 2019

When the cement paste in concrete is exposed to high temperatures, the mechanical performance decreases due to a series of reactions inside the cement. In this study, we investigated the change of nanostructure of $C_3S$ when $C_3S$ was exposed to high temperature using pair distribution function (PDF) based on high energy X-ray scattering. As a result of X-ray diffraction, there was no significant difference when $C_3S$ was heated at $300^{\circ}C$, but most of $Ca(OH)_2$ was decomposed into CaO at $500^{\circ}C$. In addition, it was confirmed that CaO is dominant in the nanostructure when $C_3S$ is heated to $500^{\circ}C$.

• Applied Microscopy
• /
• 제26권3호
• /
• pp.379-388
• /
• 1996

Structure of premartensite in $Ti_{50}Ni_{49}Fe_1\;and\;Ti_{50}Ni_{50}$ prepared by self-propagating high temperature synthesis (SHS) method has been investigated by a detailed transmission electron microscopy. $Ti_{50}Ni_{49}Fe_1$ consists of microdomain area and needle type domain area. On the other hand, $Ti_{50}Ni_{50}$ consists of microdomain-free and microdomain area, and needle type domain area. Various types of extra superreflections, such as 1/2<100>, 1/2<110> and 1/4<210> type superreflection have been observed in the selected area electron diffractions from microdomain area. Such extra superreflections are due to transformation from B2 structure to distorted B2 structure or premartensite. The present study shows that incommensurate phase forms as an intermediate phase during martensitic transformation. Particularly, in Fe-free $Ti_{50}Ni_{50}$, two types of matrix phases have been observed, microdomain and microdomain-free area. Types of extra superreflections in $Ti_{50}Ni_{50}$ are different from those in $Ti_{50}Ni_{49}Fe_1$, i.e. 1/7<321> type superreflections have been observed, instead of 1/2<110>, 1/2<100>, 1/4<210> types in $Ti_{50}Ni_{49}Fe_1$.

• Nuclear Engineering and Technology
• /
• 제41권9호
• /
• pp.1171-1180
• /
• 2009

The internal core baffle structure of a French Pressurized Water Reactor (PWR) consists of a collection of baffles and formers that are attached to the barrel. The connections are done thanks to a large number of bolts (about 1500). After inspection, some of the bolts have been found cracked. This has been attributed to the Irradiation Assisted Stress Corrosion Cracking (IASCC). The $Electricit\acute{e}$ De France (EDF) has set up a research program to gain better knowledge of the temperature distribution, which may affect the bolts and the whole structure. The temperature distribution in the structure was calculated thanks to the thermal code SYRTHES that used a finite element approach. The heat transfer between the by-pass flow inside the cavities of the core baffle and the structure was accounted for thanks to a strong thermal coupling between the thermal code SYRTHES and the CFD code named Code_Saturne. The results for the CP0 plant design show that both the high temperature and strong temperature gradients could potentially induce mechanical stresses. The CPY design, where each bolt is individually cooled, had led to a reduction of temperatures inside the structures. A new parallel version of SYRTHES, for calculations on very large meshes and based on MPI, has been developed. A demonstration test on the complete structure that has led to about 1.1 billion linear tetraedra has been calculated on 2048 processors of the EDF Blue Gene computer.

• 콘크리트학회논문집
• /
• 제16권5호
• /
• pp.597-604
• /
• 2004

본 연구는 실리카퓸을 사용한 고강도 콘크리트의 고온하의 압축강도의 저하 및 공극률 변화를 통하여 강도 감소와 공극구조와의 연관성을 검토하였다. 또한, 실리카퓸 혼입의 유무와 각 가열온도에서의 시멘트 수화물의 탈수에 의한 공극특성의 변화에 관한 기초 데이터를 제공하고자 하였다. 연구결과, 실리카퓸의 혼입에 따른 필러효과 및 물-결합재비의 차로 인해 공극률 및 공극분포는 다르게 나타났다. 가열온도가 상승함에 따라 공극률도 점진적으로 증가하는 경향을 보였다. 또한, $600^{\circ}C$ 이상의 고온에서의 경향성은 더욱 현저하였다. 가열온도의 상승에 따라 $0.1{\~}0.5{\mu}m$공극의 증가는 현저하였으며 이는 모세관 공극의 수분의 증발 및 C-S-H계 수화물 및 수산화칼슘이 분해되어 결합수가 탈수한 결과이다. 고열에 의한 신축도 콘크리트 내부의 미세균열을 발생시켜 공극률 증가를 유발한다. 이러한 공극률 증가는 가열온도에 따라 일정한 경향성을 띠므로 화해를 입은 콘크리트의 수열온도 및 국부적인 성능저하를 예측할 수 있을 것으로 기대된다.

• Bulletin of the Korean Chemical Society
• /
• 제34권9호
• /
• pp.2663-2670
• /
• 2013

The purpose of stability testing is to provide evidence about how the quality of a drug varies with time under the influence of a variety of environmental factors. In this study, erythropoietin (EPO) was analyzed under different pH (pH 3 and pH 9) and temperature ($25^{\circ}C$ and $40^{\circ}C$) conditions according to current Good Manufacturing Practice (cGMP) and International Conference on Harmonisation (ICH) guidelines. The molecular weight difference between intact EPO and deglycosylated EPO was determined by SDS-PAGE, and aggregated forms of EPO under thermal stress and high-pH conditions were investigated by size exclusion chromatography. High pH and high temperature induced increases in dimer and high molecular weight aggregate forms of EPO. UPLC-ESI-TOF-MS was applied to analyze the changed modification sites on EPO. Further, normal-phase high-performance liquid chromatography was performed to identify proposed glycan structures and high pH anion exchange chromatography was carried out to investigate any change in carbohydrate composition. The results demonstrated that there were no changes in modification sites or the glycan structure under severe conditions; however, the number of dimers and aggregates increased at $40^{\circ}C$ and pH 9, respectively.

• 한국세라믹학회지
• /
• 제48권6호
• /
• pp.487-492
• /
• 2011

The effect of the application of lanthanum strontrium manganite and yttria-stabilized zirconia (LSM-YSZ) nano-composite fabricated by pulsed laser deposition (PLD) as a cathode of solid oxide fuel cell (SOFC) is studied. A gradient-structure thin-film cathode composed of 1 micron-thick LSM-YSZ deposited at an ambient pressure ($P_{amb}$) of 200 mTorr; 2 micron-thick LSM-YSZ deposited at a $P_{amb}$ of 300 mTorr; and 2 micron-thick lanthanum strontium cobaltite (LSC) current collecting layer was fabricated on an anode-supported SOFC with an ~8 micron-thick YSZ electrolyte. In comparison with a 1 micron-thick nano-structure single-phase LSM cathode fabricated by PLD, it was obviously effective to increase triple phase boundaries (TPB) over the whole thickness of the cathode layer by employing the composite and increasing the physical thickness of the cathode. Both polarization and ohmic resistances of the cell were significantly reduced and the power output of the cell was improved by a factor of 1.6.

• Journal of the Optical Society of Korea
• /
• 제15권4호
• /
• pp.329-334
• /
• 2011

We proposed a poly-dimethylsiloxane (PDMS)-coated fiber Bragg grating (FBG) temperature sensor for enhancing temperature sensitivity. By embedding the bare FBG in a temperature-sensitive elastomeric polymer, the temperature sensitivity of the proposed structure could be effectively improved by 4.2 times higher than those of the conventional bare-type FBG sensors due to the high thermal expansion coefficient of the PDMS. We analyzed the temperature-sensitivity enhancement effect with the increased Bragg wavelength shift in our structure and dependence on the temperature sensitivity with respect to the cross-section area of the PDMS.

• 대한치과기공학회지
• /
• 제27권1호
• /
• pp.65-71
• /
• 2005

Experimental Ti-13%Zr and Ti-13%Zr-5%Cu alloys were made in an argon-arc melting furnace. The grade 2 CP Ti was used to control. The alloys were cast into phosphate bonded $SiO_2$ investment molds using an argon-arc casting machine, and The hardness and microstructures of the castings were investigated in order to reveal their possible use for new dental casting materials and to collect useful data for alloy design. The hardness of the Ti-13%Zr-5%Cu alloy(379Hv) became higher than that of Ti-13%Zr(317Hv) alloy, and the hardness of this alloys became higher than that of CP Ti(247Hv). Increasing in the hardness of the Ti-13%Zr-5%Cu alloy was considered to be solid solution hardening as the Ti-Zr system shows a completely solid solution for both high temperature $\beta$phase and low temperature $\alpha$ phase and also the inclusion of the eutectoid structure($\alpha Ti+Ti_{2}Cu$). No martensitic structures are observed in the specimen made of CP Ti, but Ti-13%Zr and Ti-13%Zr-5%Cu alloys show a kind of martensitic structure. Ti-13%Zr-5%Cu shows the finest microstructure. From these results, it was concluded that new alloys for dental casting materials should be designed as Ti-Zr-Cu based alloys.