• 소성∙가공
• /
• 제7권5호
• /
• pp.450-458
• /
• 1998

The high temperature deformation behavior of Al 5083 alloy has been studied in the temperature range of 350 to 520 ${\circ}C$ and strain rate range of 0.2 to 3.0/sec by torsion test. The strain rate sensitivity(m) of the material was evaluated and used for estabilishing power dissipation maps following the dynamic material model. These maps show the variation of efficiency of power dissipation(${\eta}$=2m/(2m+1)) with temperature and strain rate. Hot restoration of dynamic recrystallization (DRX) was analyzed from the flow curve, deformed microstructure, and processing maps during hot deformation. Also, the effect of deformation strain on the efficiency of power dissipation of the alloy was analysed using the processing maps. Moreover relationship between the hot-ductility and efficiency of power dissipation of the alloy depending on thmperature and strain rate was studied using the Zener-Hollomon parameter(Z=${\varepsilon}$exp(Q/RT) It is found that the maximum efficiency of power dissipation for DRX in Al 5083 alloy is about 74.6 pct at the strain of 0.2. The strain rate and temperature at which the efficiency peak occurred in the DRX domain is found to be ∼0.1/sec and ∼450${\circ}C$ respectively.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1772-1782
• /
• 1993

The characteristics of metal matrix composite under dynamic tension at high strain rates up to the order of $10^3/sec$ is studied by using newly developed apparatus. The composite material processed in this research is aluminum-alumina metal matrix composites, arid fabricated by compocasting with the fiber volume fraction from 5 to 20%. The whisker and matrix material used in this paper were ${\delta}-Al_2O_3$ and Al-6061, respectively. The mechanical tests performed in this research are low and high strain rate tensile test. At low strain-rate tensile test, the modulus of elasticity and the ultimate tensile strength of the composites were improved about 77 pct. and 55 pct., respectively comparing with the unreinforced materials. At strain-rate from $10^{-3}\;to\;10^3/s$, the effect of strain-rate on the modulus, ultimate strength, flow stress is determined. Also the effect of strain rate on the modulus, ultimate tensile strength, flow stress and elongation to failures were investigated.

• Nuclear Engineering and Technology
• /
• 제43권1호
• /
• pp.83-88
• /
• 2011

To define the effect of strain rate variation from 0.04% to 0.004%/s on environmental fatigue of CF8M cast stainless steel, which is used as a primary piping material in nuclear power plants, low-cycle fatigue tests were conducted at operating pressure and temperature condition of a pressurized water reactor, 15 MPa and $315^{\circ}C$, respectively. A high-pressure and high-temperature autoclave and cylindrical solid fatigue specimens were used for the strain-controlled low-cycle environmental fatigue tests. It was observed that the fatigue life of CF8M stainless steel is shortened as the strain rate decreases. Due to the effect of test temperature, the fatigue data of NUREG-6909 appears a slightly shorter than that obtained by KEPRI at the same stress amplitude of $1{\times}10^3$ MPa. The environmental fatigue correction factor $F_{en}$'s calculated with inputs of the test data increases with high strain amplitude, while the $F_{en}$'s of NUREG-6909 remain constant regardless of strain amplitude.

• Mycobiology
• /
• 제51권3호
• /
• pp.169-177
• /
• 2023

To further explore the molecular mechanism of triterpenoid biosynthesis and acquire high-value strain of Sanghuangporus baumii, the Agrobacterium tumefaciens-mediated transformation (ATMT) system was studied. The key triterpenoid biosynthesis-associated gene isopentenyl diphosphate isomerase (IDI) was transformed into S. baumii by ATMT system. Then, the qRT-PCR technique was used to analyze gene transcript level, and the widely targeted metabolomics was used to investigate individual triterpenoid content. Total triterpenoid content and anti-oxidant activity were determined by spectrophotometer. In this study, we for the first time established an efficient ATMT system and transferred the IDI gene into S. baumii. Relative to the wild-type (WT) strain, the IDI-transformant (IT) strain showed significantly higher transcript levels of IDI and total triterpenoid content. We then investigated individual triterpenoids in S. baumii, which led to the identification of 10 distinct triterpenoids. The contents of individual triterpenoids produced by the IT2 strain were 1.76-10.03 times higher than those produced by the WT strain. The triterpenoid production showed a significant positive correlation with the IDI gene expression. Besides, IT2 strain showed better anti-oxidant activity. The findings provide valuable information about the biosynthetic pathway of triterpenoids and provide a strategy for cultivating high-value S. baumii strains.

• Structural Monitoring and Maintenance
• /
• 제10권2호
• /
• pp.155-174
• /
• 2023

High performance concrete (HPC) has been extensively used in thin overlay for repair purpose due to its excellent strength and durability. This paper presents an experiment, where the sensor-instrumented HPC overlays have been followed by dynamic strain and moisture content monitoring for 1 year, under normal traffic. The vibrating wire and soil moisture sensors were embedded in overlay before construction. Four given HPC mixes (2 original mixes and their shrinkage-modified mixes) were used for overlays to contrast the strain and moisture results. A calibration method to accurately measure the moisture content for a given concrete mixture using soil moisture sensor was established. The monitoring results indicated that the modified mixes performed much better than the original mixes in shrinkage cracking control. Weather condition and concrete maturity at early age greatly affected the strain in concrete. The strain in HPC overlay was primarily in longitudinal direction, leading to transverse cracks. Additionally, the most moisture loss in concrete occurred at early age. Its rate was very dependent on weather. After one year, cracking survey was carried out by vision to verify the strain direction and no cracks observed in shrinkage modified mixes.

• 한국균학회지
• /
• 제34권2호
• /
• pp.88-91
• /
• 2006

가평에서 낮은 생산성을 보이는 저온성 품종과 고온성 품종의 균사상태 및 골목 표면에 형성된 해균에 대한 조사를 시도했다. 순수배지에서의 균사생장력을 조사한 결과, 저온성 균주는 분리균에 비해 보존균의 생장력이 1.1% 정도 떨어지는 것으로 나타났으며, 고온성 균주는 분리균의 생장력이 보존균의 생장력에 비해 8.0% 정도 떨어지는 것으로 나타났다. 톱밥배지에서의 균사생장력을 조사한 결과, 고온성 분리균은 보존균에 비해 10.8%정도 생장력이 떨어졌으며, 저온성 분리균은 보존균에 비해 25.1% 떨어지는 것으로 나타났다. 중량감소율 조사결과, 고온성 분리균은 보존균에 비해 20.1% 정도 중량감소율이 낮았으며, 저온성 분리균도 보존균에 비해 19.0%정도 낮은 것으로 나타났다. 무처리에 비해서는 고온성 보존균이 107.0%, 고온성 분리균이 49.5%, 저온성 보존균이 85.4%,저온성 분리균이 50.0% 더 감소된 것으로 나타났다. 대치배양한 결과, 고온성 분리균과 저온성 분리균 모두 각각의 해당 보존균들과 동일한 균주임을 확인할 수 있었다. 또한 골목에서 검은혹버섯(Hypoxylon truncatum), 구름버섯(Coriolus versicolor), 기와층버섯(Inonotus xeranticus), 삼색도장버섯(Daedaleopsis tricolor), 이중껍질버섯(Graphostroma platystoma), 점균류(Myxomycetes) 2종, 푸른 곰팡이(Trichoderma sp.), Hypoxylon fragiforme, Hypoxylon howeianum, Nitschkia confertula 등 총 11종의 해균이 발견되었으며, 골목들의 상태는 좋지 않았다.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.167-174
• /
• 2003

Fatigue damage of 2.2Ni-1Cr-0.5Mo steel used fir high strength pressure tubes and vessels was evaluated using uniaxial specimens subjected to strain-controlled fatigue loading. Based on the fatigue test results from different strain ratios of -2. -i 0, 0.5, 0.75, the fatigue damage of the steel was represented by using a cyclic strain energy density. Mean stress relaxation depended on the magnitude of the applied strain amplitude. The high pressure vessel steel exhibited the cyclic softening behavior. Total strain energy density consisting of the plastic strain energy density and the elastic tensile strain energy density described fairly well the fatigue life of the steel, taking the mean stress effects into account. Compared to other fatigue damage parameters, fatigue life prediction by the cyclic strain energy density showed a good correlation with the experimental fatigue lift within a factor of 3.

• 미생물학회지
• /
• 제10권1호
• /
• pp.9-28
• /
• 1972

1. To get the suitable yeasts for the tratment of waste liquor from pulp and paper industries, the 162 yeasts were isolated from the waste liquor, decayed trees and sewage (1, 7, 8, 9, 1971). 17 species were chosen by its ability to assimilate the carbon compounds and indentified. 2. All of the strain was increased its growing ability by agitation. In particular, the strain 912, strain 613, strain 100, strain 732 showed excellent high productive ratio(A/$A_{0}$). 3. The optimum temperature of the strains rangel $27^{\circ}C$ and $30^{\circ}C$. 4. Most of the strain was grown actively in 10C/5N-composition and strain 113, strain 432, strain 735, strain 936, and strain 912 showed its optimum growing in 15C/5N-composition and 5C/5N-composition, respectively. 5. The optimum pH of the strains lay within range pH 4.5-6. Effect of the variation of pH on the growth was nearly negligible within this range. 6. The strain 912, strain 100, strain 613, strain 311, strain 235, and strain 732 were expected for the utilization to the treatment of the waste liquor from pulp and paper industries.

• 소성∙가공
• /
• 제32권5호
• /
• pp.268-275
• /
• 2023

ISO 21029 cryogenic vessel is used to transport cryogenic fluids. High-manganese steel (High-Mn steel) is widely regarded as suitable for use at cryogenic temperatures. The conventional way of manufacturing an ellipsoidal vessel head involves incremental stretching, followed by a spinning process. In this study, an alternative method for forming an ellipsoidal vessel head was proposed. Finite element analysis (FEA) was used to theoretically examine the strain evolution during a multi-stage forming process, which involved progressive stretching, deep drawing, and spinning of High-Mn steel. The distribution of effective strain and strain components were analyzed at different regions of the formed part. The FEA results revealed that only normal strains were evident in the dished region of the vessel head due to the stretching process. However, the flange region experienced complex strain evolution during the subsequent deep drawing and spinning process.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 추계 학술발표회 논문집
• /
• pp.865-868
• /
• 2006

An experimental investigation was carried out to evaluate the transient strain of concrete at high temperature. Two level of W/B ratio were selected as 46% and 32%. Four level of preload were adopted as 0, 15, 30, 45% of compressive strength. The entire temperature range was between room temperature and $700^{\circ}C$. Based on the test results, transient strain of concrete at high temperature was affected by the compressive strength as well as the preload level.