• Journal of ILASS-Korea
• /
• v.13 no.4
• /
• pp.173-179
• /
• 2008

The current machinery and tools of secondary channel of the nuclear power plants were produced in the carbon-steel and low-alloy steel. What produced with the carbon-steel occurs wall thinning effect from flow accelerated corrosion by the fluid flow at high temperature, high pressure. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed. Wall thinning by flow accelerated corrosion occurs piping system, the heat exchanger, steam condenser and feedwater heaters etc,. Feedwater heaters of many nuclear power plants have recently experienced sever wall thinning damage, which will increase as operating time progress. This study describes the comparisons between the numerical results using the FLUENT code and experimental data of down scale model.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.12
• /
• pp.821-830
• /
• 2007

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle-installed downstream of the high pressure turbine extraction steam line- inside number 5A and 5B feedwater heaters. At that point, the extracted steam from the high pressure turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows in reverse direction after impinging the impingement baffle, the shell wall of the number 5 high pressure feedwater heater may be affected by flow-accelerated corrosion. This paper describes the comparisons between the numerical results using the FLUENT code and the down scale experimental data on effect of geometry of the impingement baffle plate on the shell wall thinning. Additionally, a new type impingement baffle plate was installed above the impingement baffle plate in the feedwater heater and then the numerical and experimental study were performed in the same progress.

• Korean Journal of Medicinal Crop Science
• /
• v.22 no.2
• /
• pp.134-139
• /
• 2014

This study was to investigate the improvement of immune activities of the extracts from Codonopsis lanceolata by stepwise steaming process and high pressure process. The phenol contents was $8.742{\mu}g/mg$ which was higher than that from conventional extraction using 70% ethyl alcohol at $80^{\circ}C$ for 24 hours. All of extracts at a concentration of $1.0mg/m{\ell}$ showed relatively low cytotoxicity on human normal kidney cell (HEK293) in range of 16 19%. The immune B and T cell growth was improved by extracts using the steamed and high pressure precess of C. lanceolata up to $180{\times}10^4cells/m{\ell}$ and $96{\times}10^4cells/m{\ell}$, respectively. The extract prepared also greatly increased the secretion of both IL-6 and TNF-${\alpha}$ from the stepwise steamed and high pressure process. This results can conclude that stepwise steamed and high pressure process effectively released active biomaterials which could important role in enhancing immune activity in the body.

• Food Science and Preservation
• /
• v.23 no.2
• /
• pp.233-238
• /
• 2016

A effect of extraction methods, including stirrer extraction method (SE), ultrasonification extraction method (USE), reflux extraction method (RE), autoclave extraction (AE) and low temperature high pressure extraction (LE) method on the antioxidative and antimicrobial activities of ethanol extracts of Oenothera biennis was investigated. The extraction yield (46.33%), total polyphenol (463.05 mg GAE/g) and flavonoid (71.71 mg RHE/g) content of Oenothera biennis extract obtained by RE were higher than those from other extraction methods. The antimicrobial activity of Oenothera biennis extract was only observed against Bacillus cereus among other tested organisms (Bacillus cereus, Staphylococcus aureus, Escherichia coli and Salmonella Typhimurium). Oenothera biennis obtained by RE showed the best DPPH radical scavenging ability (74.40%), ABTS radical scavenging ability (65.29%), reducing power (1.370 ($OD_{700}$)) and ferrous ion chelating ability (90.14%) compared with other tested extraction methods tested. The RE method was the most efficient method for extracting crude antioxidant and antimicrobial substances from Oenothera biennis. These results suggested that Oenothera biennis obtained by RE could be used as a bioactive and functional material in the food industry.

• Korean Journal of Medicinal Crop Science
• /
• v.15 no.6
• /
• pp.411-416
• /
• 2007

This study was performed to investigate the reduction of toxicity and improvement of anticancer activities from R. sachalinensis by ultra high pressure extracts process. The cytotoxicity on human kidney cell (HEK293) and human lung cell (HEL299) was showed below 20.4% and 21.6% as compare to normal extracts in adding 1.0 $mg/m{\ell}$ concentration. This showed that toxic materials through ultra high pressure processing is broken or degraded. Because bond such as hydrogen bond, electrostatic bond, Van der waals bond, the hydrophobic bond, can be broken by high pressure. The anticancer activity was also increased in over 7% by high pressure processing in A549, AGS, MCF-7 and Hep3B cells. The result showed that extraction by high pressure have low cytotoxicity and high anticancer activity. So, the high pressure extraction technology can play an important role in eruption of new material with high biological activity.

• Korean Journal of Pharmacognosy
• /
• v.50 no.2
• /
• pp.102-111
• /
• 2019

Inflammation that is considered to be mainly related to pathogenesis of atopic dermatitis (AD) is the biological response of a host to stimuli, such as cellular injury or infection. In this study, we investigated the anti-inflammatory and anti-oxidative activities of white ginseng roots by ultra high pressure extraction (Gin-UHP), fermentation followed by ultra high pressure extraction (Gin-UHPF), and polyol extraction (Gin-POL). As a result, ginseng extracts were able to decrease the secretion of pro-inflammatory cytokines (interleukin-8 and tumor necrosis factor-alpha) and immunoglobulin E. Also, Gin-POL had the highest DPPH radical scavenging activity and when we compared the SOD-like activity, Gin-UHP had the highest. Moreover, we looked into the effect of these ginseng extracts on anti-aging to show the possible usefulness as a raw material of cosmetics. As a result, ginseng extracts were able to reduce the production of melanin, and inhibit the tyrosinase and elastase activities in a dose-dependent manner. The extracts also decreased the expression of MMP-1 and had a significant hyaluronidase inhibitory activity. Taken together, these results demonstrate that ginseng extracts may have an improvement effect on AD by using its anti-inflammatory and antioxidant properties.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.117-124
• /
• 2000

Considering the thermal unstableness of ginseng components, microwave-assisted extraction(MAE) was performed under the atmospheric pressure condition. The monitoring of extraction characteristics and the optimization of extraction conditions were made by response surface methodology. The extraction efficiency of soluble ginseng components was high at lower ethanol concentration and at higher microwave power, while crude saponin content was easily extracted at higher ethanol concentration. Estimated conditions for the maximized extraction of soluble components including crude saponin, total phenolics and electron donating ability were $54{\sim}60%$ in ethanol concentration, $41{\sim}90$ W in microwave power, and within 4 min in extraction time. Predicted values at the optimum condition(60% ethanol, 80 W microwave power and 4 min extraction time) were in good agreement with observed values.

• Journal of the Korean Wood Science and Technology
• /
• v.17 no.2
• /
• pp.65-73
• /
• 1989

Steam explosion process is an efficient pretreatment method for sparating and utilizing wood main components has attracted attention in utilization of ligno-cellulosic biomass. In order to obtain the effective pretreatment condition. this study was made explosion apparatus. examined the composition. extraction of exploded wood. Wood chips of pine(Pinus densiflora oak (Quercus serrata) and birch wood (Belula platyphylla var. japonica) were treated with a high pressure steam(20-30 kg/$cm^2$, 2-6 minutes). The results can be summarized as follow; In analysis of exploded wood(EXW). It was found arabinose residues rapidly decreased with increasing of steaming time and pressure. Extractives of EXW with sodium hydroxide increased with increasing of steaming-time and- pressure especially extractives 1% sodium hydroxide has higher than other extracted method extractives of hard wood(oak, birch) has higher than pine wood. In EXW extracted with sodium hydroxide and methanol lignin was partially delignified alkali extraction was more delignified than methanol extraction hardwood than pine wood.

• Journal of the Korean Chemical Society
• /
• v.48 no.2
• /
• pp.156-160
• /
• 2004

The extraction rates of plasticizer of LPG high pressure rubber are studied. Submerging solvents are composed of propane, n-butane, n-pentane, n-hexane, n-heptane, propylene, 1,3-butadiene, 1-pentene, 1-hexene, ethanethiol, t-butanethiol, dimethyl sulfide, methyl ethyl sulfide. The relationship between the extraction rate of plasticizer and the descriptors of submerging solvent by using multiple linear regression is as follows; PE(wt%) = 7.5193 - 0.58500Carbon${\sharp}$ + 2.3294DB + 2364SH, (N = 13, F = 24.135, R$^2$ = 0.8894, R$_{adj}^2$ = 0.8526, Variance = 7.588) Plasticizer is well extracted by LPG composed of the high vapour pressure and polarity compounds. The mass of extracted plasticizer becomes increasing in proportion to the contents of thiol sulfur compound and unsaturated hydrocarbon such as propylene and 1,3-butadiene in LPG. While the heavier hydrocarbons are, the less the quantities of plasticizer extracted from rubber are.

• Korean Journal of Medicinal Crop Science
• /
• v.19 no.1
• /
• pp.54-65
• /
• 2011

This study was performed to investigate the enhancement of cosmeceutical activities of Berberis koreana bark by different extraction processes. The extracts are WE (water extract at $100^{\circ}C$, control), USE (ultrasonification for 1 hours at $60^{\circ}C$ with water), HPE (high pressure for 5 minutes at $60^{\circ}C$ with water) and USE + HPE (ultrasonification process for 1 hours after high pressure for 5 minutes at $60^{\circ}C$ with water), respectively. The cytotoxicity of the extracts was in the range of 24.02~26.94% at 1.0 mg/ml concentration. The USE + HPE showed the lowest cytotoxicity. Compared to the WE, total phenolic and flavonoid contents in the USE + HPE increased to 121.5% and 154.2%. The USE + HPE showed the highest activity at 1.0 mg/ml concentration in 1,1-diphenyl-2-picryl-hydrazyl (DPPH) radical scavenging, inhibition activity of xanthine oxidase and superoxide dismutase (SOD)-like test, respectively. Tyrosinase inhibition of WE, USE, HPE and USE + HPE at 1.0 mg/ml concentration was measured as 17.72, 19.62, 22.83 and 24.16%, respectively. Hyaluronidase inhibition activities of the USE + HPE were higher than 20.8%~29.5% of the WE. Our results suggested that the extracts from ultrasonification process after high pressure extraction has relatively high cosmeceutical activities, and that the bark of Berberis koreana could be considered as a candidate of new functional cosmetic agents.