• 제목/요약/키워드: High Place Working Vehicle

검색결과 8건 처리시간 0.022초

다관절 고소작업 차량의 구조해석 (Structural Analysis of Multi-Linked High Place Working Vehicle)

  • 방승옥;조재웅
    • 한국산학기술학회논문지
    • /
    • 제12권2호
    • /
    • pp.617-622
    • /
    • 2011
  • 본 논문에서는 고소작업 차량의 플랫폼에 수직하중 조건을 주어 구조해석을 수행한다. 해석모델은 실제 크기의 1:10으로 축소한다. 붐의 각도에 따른 응력분포 및 변형량 분석을 통하여 취약부분을 파악한다. 해석결과를 보면 대부분 붐의 연결부분에서 응력이 집중되는 것을 볼 수 있다. 이러한 해석결과를 통하여 다른 부분에 비하여 상대적으로 취약한 연결부분을 보완함으로서 안전성을 증진시킨다.

Experience with an On-board Weighing System Solution for Heavy Vehicles

  • Radoicic, Goran;Jovanovic, Miomir;Arsic, Miodrag
    • ETRI Journal
    • /
    • 제38권4호
    • /
    • pp.787-797
    • /
    • 2016
  • Mining, construction, and other special vehicles for heavy use are designed to work under high-performance and off-road working conditions. The driving and executive mechanisms of the support structures and superstructures of these vehicles frequently operate under high loads. Such high loads place the equipment under constant risk of an accident and can jeopardize the dynamic stability of the machinery. An experimental investigation was conducted on a refuse collection vehicle. The aim of this research was to determine the working conditions of a real vehicle: the kinematics of the waste container, that is, a hydraulic rotate drum for waste collection; the dynamics of the load manipulator (superstructure); the vibrations of the vehicle mass; and the strain (stress) of the elements responsible for the supporting structure. For an examination of the force (weight) on the rear axle of a heavy vehicle, caused by its own weight and additional load, a universal measurement system is proposed. As a result of this investigation, we propose an alternative system for continuous vehicle weighing during waste collection while in motion, that is, an on-board weighing system, and provide suggestions for measuring equipment designs.

Occupational Accidents and Injuries for Moving Helpers

  • Park, Myoung Hwan;Jeong, Byung Yong;Kim, Sook-Hyun
    • 대한인간공학회지
    • /
    • 제34권4호
    • /
    • pp.353-362
    • /
    • 2015
  • Objective: This study aims to analyze occupational accidents of moving helpers by work place type which means the type of residence where moving operation is done. Background: Most efforts have been focused on the industry base comprising various occupational spectrum and provided industry general preventative policies. But occupation specific policies are required for the workers involved and will reduce the occurrences of occupational accidents for the workers subject to similar working environment and process. Method: This study analyzes 208 non-motor vehicle collision related occupational accidents of moving helpers working for used household and office goods moving industry occurring from 2010 to 2012. Accident Type, agencies, event or exposure, parts of body affected are characterized by work places according to the work environment. Results: Accidents characteristics showed the difference between high-rise type and low-rise type on the size of enterprise, age, gender and work experience of the injured. Also the accident type, source of accident and parts of body affected are different between the two work place types. Finally, Accidents occurred on the specific operational processes of moving service also showed different characteristic between the two types. Conclusion and Application: The findings of accident characteristics according to workplace types and operational process of moving service can be used as baseline data for establishing systemized preventative policies for occupational accidents of moving helpers.

우리나라 대표적(代表的) 표본인구(標本人口)의 연간(年間) 손상(損傷) 및 중독발생율(中毒發生率)과 역학적(疫學的) 특성(特性) (National Survey of Injury and Poisoning on a Representative Sample Population of Koreans)

  • 김정순;김성수;장성칠
    • Journal of Preventive Medicine and Public Health
    • /
    • 제27권3호
    • /
    • pp.447-463
    • /
    • 1994
  • Despite the public health importance of injury and poisoning in terms of its high mortality and incidence, epidemiologic information to be utilized are scarce in Korea. This study was carried out in 1990 on a representative sample population (about 55,000 persons) along with the 6th National Tuberculosis Prevalence Survey in order to estimate the magnitude of injury and poisoning occurrence and to identify its epidemiologic characteristics which can be aided for establishing preventive strategy. Pre-tested and structured Questionnaire was used by trained interviewer to collect data including general information of the person, various information on the injury and poisoning during the past one year such as time and place of its occurrence, its nature and external causes, type of medical institute attended, duration of treatment and outcome of the accident occured. In analysis of the data collected incidence rates per 1000 persons by sex, age group and its nature as well as external causes, and relative frequencies were calculated. The result obtained are as followings; 1. The incidence rate per 1000 was 30 for both sexes, 39 for male and 22 for female, male being 1.8 times more frequent than female. Age adjusted incidences were not much different from the crude rates. Age group specific rate curve showed bimodal shape in both sexes, small peaks in preschool children and higher peaks in older ages. The incidence rate per 1000 people by area was highest in Jeon-bug province (57/1000) and the lowest in Daegu city(11/1000). 2. The place where the injuries occured were road in 46%, within the boundary of house in 25%, and working place in 12% The injuries and poisoning had occured more frequently during the months from March to August of the year than other months. 3. The relatively frequent injuries by its nature were contusion with intact skin surface (19%), fracture of upper limb (13%), open wound of head, neck and trunk (12%) and fracture of lower limb (11%) among males; contusion with intact skin surface (28%), sprains and strains of joints and adjacent muscle (14%), fracture of upper limb (10%) and fracture of lower limb (9%) among females. Higher incidence rate among males than females were fracture of skull (4.5 times), open wound and fractures of limbs ($2{\sim}3$ times). Age specific rate of injuries and poisoning by its nature showed increasing pattern by age in fractures of upper and lower limbs and sprains & strains of joints whereas the age group of 30's showed highest incidence in open wounds of upper limb. Fractures of radius and ulna in upper limb, fractures of tibia & fibula and ankle in lower limb were most frequent among fractures of upper and lower limbs. The frequent injuries among sprains and strains of joints and adjacent muscles were that of ankle, foot and back, and among open wound were that of head and fingers. 4. Relative frequency of injuries and poisoning by external causes showed following order : other accidents (25%), accidental falls (23%), motor vehicle accident (22%) and other road vehicle accident (14%) among males and accidental falls (37%), motor vehicle accident (24%) and other accident (18%) among females. The external causes revealing higher incidences among males than females, were other road vehicle accident (4.8 times), vehicle accident not elsewhere classifiable (4.4 times), accidental poisoning (4.4 times), accidents due to natural and environmental factors (2.8 times), and sucide & self-inflicted injuries (2.8 times). Age specific incidence by external causes for frequent injuries showed that incidence of other accident steadily increased from 10's till age 50's; motor vehicle traffic accident increased from age 20's and dropped after age 60's; on the other hand accidental fall increased strikingly by age. The most frequent external causes among motor vehicle traffic accidents was motor vehicle traffic accident involving collision with pedstrain (69%), pedal cycle accident (30%) and other road vehicle accident (71%) among other road vehicle accidents; falls on same level from slipping, tripping or standing (44%) and other falls from one level to another among accidental falls; accidents caused by machinary (32%) for male and striking against or struck accidentally by objects or person for female among other accidents. 5. Seventy nine percent of the injuries and poisonings were treated in general hospital or hospital/clinic. The duration of treatment ranged from a few days to 123 weeks; the majority(52%) took under 2 weeks, 36% for $3{\sim}8$ weeks and 4% over 21 weeks. 6. The accident resulted in full recovery of normal healthy state in 62%, residual functional defects in 21% and on process of treatment in 16%.

  • PDF

Hazardous Factors and Accident Severity of Cabling Work in Telecommunications Industry

  • Kim, Yang Rae;Park, Myoung Hwan;Jeong, Byung Yong
    • 대한인간공학회지
    • /
    • 제35권3호
    • /
    • pp.155-163
    • /
    • 2016
  • Objective: This study aims to draw the characteristics of occupational accidents occurred in cabling work, and assess accident severity based on occupational injury data. Background: Accident factors and accident risk are different by the place of work in cabling work. Field managers require information on accident prevention that can be easily understood by workers. However, there has been a lack of studies that focus on cabling work in Korea. Method: This study classifies 450 injured persons caused in cabling work by process, and analyzes the characteristics of occupational injuries from the aspects of age, work experience and accident type. This study also analyzes accident frequency and severity of injury. Results: Results show that preparing/finishing (33.3%) was the most common type of cabling process in injuries, followed by maintenance (28.4%), routing/income (23.1%) and wiring/installation (15.1%) process. The critical incidents in the level of risk management were falls from height in the routing/incoming process, and falls from height in the maintenance process. And, incidents ranked as 'High' level of risk management were slips and trips, fall from height and vehicle incident in the preparing/finishing process, and fall from height in the wiring/installation process. Conclusion and Application: The relative frequency of accident and its severity by working process serve as important information for accident prevention, and are critical for determining priorities in preventive measures.

크레인 LMTT용 이동체의 구조최적설계 (Structural Optimization for LMTT-mover of a Crane)

  • 민경암;이권희;한동섭;한근조
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2004년도 추계학술대회
    • /
    • pp.311-316
    • /
    • 2004
  • LMTT는 항만 자동화를 위한 수평 이송이 가능하도록 설계된 셔틀카(shuttle car)와 격자구조의 레인에 부착된 스테이터 모듈 (stator module)로 구성된 PMLSM(Permanent Magnetic Linear Synchronous Motor)에 의해 구동된다 본 논문에서는 강도기준을 고려하고 경량화 설계를 위하여 셸(shell) 요소로 유한요소 모델링된 이동체(mover)의 구조최적설계를 수행하였다. 설계변수로는 가로 빔, 세로 빔, 휠 빔의 두께와 높이 방향의 치수를 결정하는 형상 변수를 포함시켰다. 목적함수로는 중량, 제한조건 함수로는 안전율이 고려된 응력으로 실정하였다.

  • PDF

RFID를 활용한 항만출입체계 개선방안 (Improvement of Port Entrance System using RFID)

  • 최형림;김현수;홍순구;박용성;김희윤;신중조;최성필;이병하;최기남;하정수
    • 한국산학기술학회논문지
    • /
    • 제11권2호
    • /
    • pp.709-719
    • /
    • 2010
  • 본 논문은 항만의 보안수준을 높이기 위하여 항만출입대상 중 인원과 일반차량에 대한 보안체계를 마련하고자 하는 것이다. 국제기구 등에서 시행하는 물류보안제도 중 항만과 관련된 동향을 파악하여 그동안 항만보안에서 주목받지 못하였던 인원과 일반차량에 대한 중요성을 강조하고 기존 문헌과 설문 및 현장방문조사를 통한 문제점을 지적하여 RFID 기술의 적용을 통해 이를 개선할 수 있는 방안을 업무 프로세스 관점에서 제시하고자 한다. 이를 통해 항만출입체계의 개선을 위해 선행되어야 하지만 연구되지 못했던 인원과 일반차량에 대한 업무 프로세스를 정리함으로써 향후 진행되는 관련 연구에 기초자료로 활용될 수 있을 것이며, RFID 기술을 도입하기 위해 고려되어야 하는 여러 가지 요인을 정리함으로써 가이드라인 역할을 할 수 있을 것으로 기대된다.

터널 내 돌발상황 오탐지 영상의 반복 학습을 통한 딥러닝 추론 성능의 자가 성장 효과 (Effect on self-enhancement of deep-learning inference by repeated training of false detection cases in tunnel accident image detection)

  • 이규범;신휴성
    • 한국터널지하공간학회 논문집
    • /
    • 제21권3호
    • /
    • pp.419-432
    • /
    • 2019
  • 대부분 딥러닝 모델의 학습은 입력값과 입력값에 따른 출력값이 포함된 레이블링 데이터(labeling data)를 학습하는 지도 학습(supervised learning)으로 진행된다. 레이블링 데이터는 인간이 직접 제작하므로 데이터의 정확도가 높다는 장점이 있지만 비용과 시간의 문제로 인해 데이터의 확보에 많은 노력이 소요된다. 그리고 지도 학습의 목표는 정탐지 데이터(true positive data)의 인식 성능 향상에 초점이 맞추어져 있으며, 오탐지 데이터(false positive data)의 발생에 대한 대처는 미흡한 실정이다. 본 논문은 터널 관제센터에 투입된 딥러닝 모델 기반 영상유고 시스템의 모니터링을 통해 정탐지와 레이블링 데이터의 학습으로 예측하기 힘든 오탐지의 발생을 확인하였다. 오탐지의 유형은 작업차량의 경광등, 터널 입구부에서 반사되는 햇빛, 차선과 차량의 일부에서 발생하는 길쭉한 검은 음영 등이 화재와 보행자로 오탐지되고 있었다. 이러한 문제를 해결하기 위해 현장에서 발생한 오탐지 데이터와 레이블링 데이터를 동시에 학습하여 딥러닝 모델을 개발하였으며, 그 결과 기존 레이블링 데이터만 학습한 모델과 비교하면 레이블링 데이터에 대한 재추론 성능이 향상됨을 알 수 있었다. 그리고 오탐지 데이터에 대한 재추론을 한 결과 오탐지 데이터를 많이 포함하여 학습한 모델일 경우 보행자의 오탐지 개수가 훨씬 줄었으며, 오탐지 데이터의 학습을 통해 딥러닝 모델의 현장 적용성을 향상시킬 수 있었다.