• Tribology and Lubricants
• /
• 제10권3호
• /
• pp.29-38
• /
• 1994

The friction and wear of mild steel at dry sliding surfaces under different vacuum conditions have been investigated to understand the wear mechanisms. For the test, a ball-ondisk typed wear-rig has been built and implemented, allowing control of sliding speed, load and vacuum. Results show that, at a high sliding velocity, friction of low carbon steel (SS41) under a high vacuum is much higher than that of ambient condition and wear is much severer. It is due to lack of effective oxidation film formation on which steel surfaces could protect themselves against the severe wear. It has been shown, however, that there is a critical regime with contact conditions (at a low sliding velocity, a low load, and under a medium vacuum) at which effective, protective films of low carbon steel have been built on the surfaces in a friction process with a self-regulating way, resulting in both very low coefficients of friction (about 0.3) and mild wear. In order to investigate the protective films on steel surfaces, the worn surfaces and the wear debris have been experimentally analyzed with SEM, AES/SAM and XRD. A theoretical analysis of frictional heating at sliding surfaces, and an experimental analysis of the influence of oxidation wear under various vacuum conditions are described. The important variables on which self-formations of protective films at dry sliding surfaces depend, and the wear mechanisms are also investigated.

• 대한지리학회지
• /
• 제38권2호
• /
• pp.156-172
• /
• 2003

정동진, 대진 지역에는 규모가 큰 해안단구 고위면이 형성되어 있을 뿐 아니라. 우리나라 중부 동해안에서 처음으로 구정선고도의 해발고도가 고위면보다 높은 고고위면이 확인되었다. 해안단구의 구정선고도는 고고위 I면(HH I) 해발고도 140m. 고고위 II교면(HH II) 110m, 고위 I면 90m, 고위 II면 70m, 중위면 40m, 저위 I면 25m, 저위 II면dl 10m이다. 그리고 홀로세에 형성된 것으로 추정되는 해발고도 5~6m의 가장 낮은 해안단구가 연구지역 전체에서 나타난다. 고고위면은 인근의 삼척 오십천 해면변동단구와 남동해안 감포지역에서 확인되는 고고위 면과 같은 시기에 형성된 것으로 볼 수 있다. 이것은 연구 지역의 해안단구 형성체계가 이들 지역의 그것과 거의 같은 데서 추론할 수 있다. 해안단구 형성시기는 최종간빙기인 MIS 5시기로 확인된 저위 I면을 단서로 중위면은 MIS 7. 고위 II면은 MIS 9, 고위 I면은 MIS 11로 판단된다. 고고위 II면은 산소동위체 MIS 13, 고고위 I면은 산소 동위체 MIS 15에 형성되었을 것이다. 고위면이 한반도 남동부 지역과 유사하게 큰 규모로 남아있는 것은 이것을 형성한 Holsteinian Interglacial의 기간이 매우 길고, 이 시기의 해면 위치에 기반암의 완사면이 넓게 형성되어 있었으므로 파식대가 비교적 용이하게 만들어진데 기인하는 것으로 생각된다.

• 대한지리학회지
• /
• 제37권3호
• /
• pp.222-236
• /
• 2002

태백산맥 동사면을 흘러 직접 동해로 유입하는 삼척 오십천의 중.하류부 하안단구는 기후단구와 해면변동단구로 구분된다. 기후단구는 5단이 확인되며, 해면변동단구는 해발고도 145-150m까지 7단의 지형면이 20-30m 간격으로 분포한다. 이와 같은 해면변동단구의 수직적 분포특징은 지반의 지속적인 융기와 기후변화에 의한 빙기와 간빙기의 해면승강작용의 결과이다. 해면변동단구 고고위면은 한반도에서 현재까지 보고된 가장 높은 해안단구보다 해발고도가 더 높다. 해발고도 40m에 분포하는 해면변동단구는 marine oxygen isotope stage 7, 해발고도 70m인 해면변동단구는 stage 9, 해발고도 90m인 해면변동단구는 stage 11, 해발고도 110m 지형면은 stage 13, 해발고도 150m 지형면은 stage 15의 간빙기에 형성된 것으로 추정된다. 중위면, 고위면과 고고위면에는 doline와 함께 uvala와 같은 카르스트지형이 발달하고 있으므로 토지이용과 지형경관이 특징적이다.

• 분석과학
• /
• 제30권1호
• /
• pp.49-56
• /
• 2017

Here, we demonstrate surface functionalization of Au chips with 4-(carboxymethyl)aniline (CMA) and amine-terminated polyamidoamine (PAMAM) dendrimers for immobilization of antibodies on the Au surfaces. Use of the functionalization strategy led to high surface density of the immobilized antibodies on the Au chips. Specifically, we found that the functionalization of Au chips with CMA and amine-terminated $6^{th}$ generation PAMAM dendrimers allowed immobilization of immunoglobulin (IgG) antibodies with high surface density, which is 5 times higher than that obtained with Au surfaces functionalized with CMA and ethylenediamine.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권4호
• /
• pp.563-569
• /
• 2008

During braking operation, the surfaces of disk have severe contact conditions and high frictional heat would be generated between disk and pad surfaces. The heat makes high temperature gradient on disk surfaces and results in thermal deformation. To enhance the frictional heat dissipation, heat pipes are embedded in the ventilated type disk along the radial direction. The temperatures of the inner vent type disk and the brake disk with heat pipes are compared at the same operating conditions. By comparison a brake disk with heat pipes has higher cooling performance than the inner vent type disk.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.141-141
• /
• 2013

Shape control of metal nanocrystals has broad applications, including catalysis, plasmonics, and sensing. It was found that controlling the atomic arrangement on metal nanocrystal surfaces affects many properties, including the electronic dipole or work function. Tuning the surface structure of exposed facets of metal nanocrystals was enabled by shape control. We investigated the effect of shape on nanomechanical properties, including friction and adhesion forces. Two nanoparticles systems, high-index {321} and low-index {100}, were used as model nanoparticle surfaces. Scanning force microscopy was used to probe nanoscale friction and adhesion. Because of the abundant presence of high-density atomic steps and kinks, high-index faceted nanoparticles have a higher surface energy than low-index faceted cubic nanoparticles. Due to this high surface energy, high-index faceted particles have shown stronger adhesion and higher friction than low-index nanoparticles. We discuss the results in light of the differences in surface energy as well as the effect of capping layers in the measurement.

• 한국정밀공학회지
• /
• 제24권3호
• /
• pp.140-146
• /
• 2007

To understand adhesive phenomena, we need to get force curve between two surfaces. And it is said that high stiffness force analysis system is needed to get precise force curve and more information of the surfaces. Usually the stiffness of the force measurement system is under the order of 10N/m. The stiffer force measurement system, however, results in more information on the surface, because higher stiffness lead to the wider range of force curves, secondly because the force curve obtained through the stiffer one describes more precise relationship between relative tip-sample separation and interaction force. In this paper, considering for stiffness and resolution, the cantilever was designed and we made adhesion force measurement apparatus with high stiffness and high resolution, so we measured adhesive force between Ag-ball and wafer.

• 한국분무공학회지
• /
• 제16권2호
• /
• pp.104-109
• /
• 2011

The present study investigated experimentally the spreading characteristics of a single liquid impinging on the inclined micro-textured aluminum (Al 6061) surfaces manufactured by using a micro computerized numerical control (${\mu}$-CNC) milling machine. The textured surfaces were composed of patterned micro-holes (diameter of $125\;{\mu}m$ and depth of $125\;{\mu}m$). In our experiment, the de-ionized (DI) water droplet of $4.3\;{\mu}l$ was impinged normally on the non-textured and textured surfaces at two different Weber numbers, and the droplet impinged on the inclined surfaces with different angles. A high speed camera was used to capture sequential digital images for measurement of the maximum spreading distance. It was found that for the textured surface, the measured apparent equilibrium contact angle (ECA) increased up to $105.8^{\circ}$, higher than the measured ECA of $87.6^{\circ}$ for the non-textured (bare) surface. In addition, it is conjectured that the spreading distance decreased because of a liquid penetration during droplet spreading through the holes, the increase in hydrophobicity, and viscous dissipation during impact process.

• 분석과학
• /
• 제36권3호
• /
• pp.121-127
• /
• 2023

범죄 현장에서 혈액을 찾아 식별하는 것은 신원 확인 및 사건 재구성을 하기 위해 중요한 과정이다. 하지만, 혈액은 어둡거나 다양한 색상의 표면에서 육안으로 관찰하기 어려울 수 있다. Acidic hydrogen peroxide (AHP)는 최근에 발표된 혈액 증강 시약으로, 카메라의 장노출 기능을 사용하면 혈액을 높은 감도로 관찰할 수 있다. 그러나 어둡거나 다양한 색상의 표면에서 기존에 알려진 기법과 비교된 바는 없다. 이를 위해, 어둡거나 다양한 색상의 표면 8 종류에 혈흔족적을 남기고 UV나 IR을 비추면서 관찰/촬영하는 방법, alginate 전사법, leuco rhodamine 6G (LR6G), AHP를 적용하여 비교하였다. 그 결과, AHP는 UV 및 IR 촬영법보다 증강한 혈액과 표면의 contrast가 높았고, alginate 전사법과 달리 모든 표면에서 적용이 가능했다. 또한 LR6G와 마찬가지로 AHP 역시 어둡거나 다양한 색상의 표면에 부착된 혈액을 성공적으로 증강하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.350-353
• /
• 2001

Aligning capabilities for nematic liquid crystal (NLC) using a in-situ photodimerization method on various photo-crosslinkable polyimide (PI) based polymer and blending photopolymer surfaces were stuided. High pretilt angle of the NLC can be measured by obliquely polarized UV exposure on a photo-crosslinkable polyirnide based polymer surface containing biphenyl (BP), decyl (de), and cholesteryl (chol) group, respectively, However, the low pretilt angle of the NLC was measured by obliquely polarized UV exposure on the blending photopolymer (PI and cinnamate materials) surfaces. Consequently, the pretilt angle of the NLC generated on the photo-crosslinkable polyimide based polymer surfaces using the in-situ photodimerization method was higher than that of the blending photopolymers.