• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.353.2-353
• /
• 2002

The attenuation of waves transmitted through non-conservative joints that are shown in many practical structures, is affected by the impedance and the orientation of the joint. In this paper, the joints between plate structures are assumed to be modeled as linear spring-dashpot systems and the transmission and reflection of vibration energy in the medium to high frequency ranges are investigated. (omitted)

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.372-375
• /
• 1999

This paper proposes a bit allocation algorithm using adaptive bandwidth for ADSL that uses the DMT technology. In certain cases for high attenuation loops the conventional algorithms are unable to assign data bits to the higher frequency tones, due to the power spectrum mask limitation recommended by ANSI Standard, even if the total power budget is not expended. In the proposed bit allocation algorithm, adjacent empty tones that would not be used merge into single tone, then additional bits is assigned to the merged empty tones. Because additional bits is allocated, most of the available power is used. The proposed algorithm show that total bit increase in about 2~9% bits more than about conventional "water-filling" and "bit removal" algorithms and that is able to use about 93% of the available budget Power

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1904-1906
• /
• 1996

Transient voltage distribution tests are carried out to evaluate effects of a high frequency oscillating voltage generated in a superconducting magnet as a result of the arc discharge extinction. Especially, the effects of temperature and conduction state of the magnet conductor on surge behavior are carefully investigated. Based on the results of simulation tests, it is shown that internal voltage waveforms are influenced by its transmission along the superconducting wire and reflection at the terminal and that attenuation process of the waveforms depends considerably on the conductor resistance which decreases with lowering the temperature.

• Smart Structures and Systems
• /
• 제19권5호
• /
• pp.577-585
• /
• 2017

In this paper, an adaptive fuzzy sliding mode controller (AFSMC) is designed to reduce dynamic responses of seismically excited structures. In the conventional sliding mode control (SMC), direct implementation of switching-type control law leads to chattering phenomenon which may excite unmodeled high frequency dynamics and may cause vibration in control force. Attenuation of chattering and its harmful effects are done by using fuzzy controller to approximate discontinuous part of the sliding mode control law. In order to prevent time-consuming obtaining of membership functions and reduce complexity of the fuzzy rule bases, adaptive law based on Lyapunov function is designed. To demonstrate the performance of AFSMC method and to compare with that of SMC and fuzzy control, a linear three-story scaled building is investigated for numerical simulation based on the proposed method. The results indicate satisfactory performance of the proposed method superior to those of SMC and fuzzy control.

• 한국소음진동공학회논문집
• /
• 제20권9호
• /
• pp.856-862
• /
• 2010

In this paper, the power flow analysis(PFA) method was developed to predict the vibrational responses of coupled co-planar orthotropic plates in frequencies ranging from medium to high. To cover the power transmission and reflection at the joint of the orthotropic plates, the wave transmission approach is applied with the assumption that all the incident waves are normal to the joint. Through numerical analyses, the power flow energy density and intensity fields of coupled co-planar orthotropic plates were compared with those of classical modal solutions by changing the frequency and internal loss factor, and they show good agreement in terms of the global decay and the attenuation patterns of the energy density.

• 한국통신학회논문지
• /
• 제33권10C호
• /
• pp.844-850
• /
• 2008

본 논문에서는 지하 암반을 타고 전달된 인공발파음 특성을 규명하기 위해 제안한 알고리즘에 대해 기술한다. 지하 암반 매질을 통과한 인공발파음은 다중전달경로 현상과 지질의 불균일 등으로 인해서 거리증가에 따라 고주파 대역에서 감쇠가 발생한다. 본 논문에서는 제안한 알고리즘 성능검증을 위해 지하터널에서 발파 실험을 하였고 수집한 데이터를 가지고 지하암반을 통과한 채널에서 특징 파라미터를 추출하여 수치적으로 정량화함으로써 인공발파음 특성을 규명하였다.

• Journal of electromagnetic engineering and science
• /
• 제11권2호
• /
• pp.91-96
• /
• 2011

In this paper, we propose a microstrip bandpass filter using stepped-impedance coupled-line hairpin resonators. The stepped-impedance coupled-line hairpin resonator has extended harmonic suppression in comparison with a conventional hairpin resonator due to transmission zero and the movement of harmonic frequencies resulting from the stepped-impedance characteristic. A high-pass type impedance/admittance inverter is employed in order to improve the lower frequency skirt characteristics of the passband. A 4-pole bandpass filter is designed and fabricated at 1.8 GHz. The measured results show the excellent attenuation performance at the stopband which is greater than 30 dB up to 10 GHz.

• 한국음향학회지
• /
• 제6권4호
• /
• pp.64-73
• /
• 1987

비균질한 천해에서의 저주파 수중음파의 전파 특성을 수치모델을 이용 분석하였다. 특히 전파매질의 비균질성이 독특한 대한해협의 겨울철 해수특성을 고려하여 음속의 수평변화, 저질두께 및 감쇠계수의 변화, 수심의 변화등 천혜의 독특한 환경 변화요인을 거의 망라한 경우를 모델로 삼았다. 음원과 수신기의 수심을 수면가까이에 둔 경우소위Mode function의 수심에 따른 특성에 의한 손실이 일반적인 손실원인보다 크게 나타났으며 Adiabatic approximation을 이용한 Mode coupling효과는 High Mode의 감쇠특성에 의해 천해에서의 모델 적용 가능성을 보여주었다.

• 대한기계학회논문집A
• /
• 제29권10호
• /
• pp.1430-1437
• /
• 2005

It is very important to achieve a high reproducibility in the ultrasonic measurement of bone mineral density. In this study, we examined number of sampling waveform, control of temperature, diameter of region of interest as factors to improve reproducibility. We decided the optimal number of waveforms to be converted to frequency domain as period of 1. We have minimized the effects of variable temperature and constrained generation of micro bubble by keeping temperature within a range of $32\pm0.5^{\circ}C$ with a precise temperature controlling algorithm. We also found the optimal diameter of region of interest to be 13mm. In this paper, we demonstrated the improved reproducibility by controlling various factors affecting the ultrasonic measurement of bone mineral density.

• 대한전자공학회논문지
• /
• 제10권5호
• /
• pp.21-30
• /
• 1973

X-Band용으로 높은 이득을 갖는 스네이크라인 선열안테나의 감쇠상수와 복사모양에 관하여 논한다. 등가적으로 폭사저항에 상당한 감쇠상수는 대략 스네이크라인의 굴곡크기를 뜻하는 Sin θa의 자승함수로 변화한다. 선열의 지향성은 스네이크라인의 수와 각 라인의 고유수에 의해서 결정된다.