• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.8
• /
• pp.737-742
• /
• 2015

Course correction munition are a weapson system for precision attacks and are assembled by applying a ballistic control system to existing projectiles. The roll control system is a subsystem of the ballistic control system and is placed between the guidance and control units inside of the projectile, which undergoes a 5000g lateral acceleration. Thus, it is very important to design the system to endure this load. Many developed countries evaluate the performance and safety of course correction munitions' parts using live-fire gun launch tests or a soft recovery system. However, these methods are expensive and slow. Thus, in this study, we develop impact analysis model of the roll control system using CAE. We apply the code to simulate impact phenomenon and use Johnson-Cook material model for modeling the high strain rate effect on the materials. We also design bearings in detail to analyze their behavior and verify the reliability of CAE model through gas-gun impact tests of the roll control system.

• Journal of Korea Spatial Information System Society
• /
• v.12 no.1
• /
• pp.18-27
• /
• 2010

In u-GIS environment, GeoSensor environment requires that dynamic data captured from various sensors and static information in terms of features in 2D or 3D are fused together. GeoSensors, the core of this environment, are distributed over a wide area sporadically, and are collected in any size constantly. As a result, storage space could be exceeded because of restricted memory in DSMS. To solve this kind of problems, a lot of related studies are being researched actively. There are typically 3 different methods - Random Load Shedding, Semantic Load Shedding, and Sampling. Random Load Shedding chooses and deletes data in random. Semantic Load Shedding prioritizes data, then deletes it first which has lower priority. Sampling uses statistical operation, computes sampling rate, and sheds load. However, they are not high accuracy because traditional ones do not consider spatial characteristics. In this paper 'Pre-Filtering based Post Load Shedding' are suggested to improve the accuracy of spatial query and to restrict load shedding in DSMS. This method, at first, limits unnecessarily increased loads in stream queue with 'Pre-Filtering'. And then, it processes 'Post-Load Shedding', considering data and spatial status to guarantee the accuracy of result. The suggested method effectively reduces the number of the performance of load shedding, and improves the accuracy of spatial query.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1104-1109
• /
• 2003

Response surface methodology (RSM) was used to investigate the effects of the processing parameters on supercritical $CO_2\;(SC-CO_2)$. extraction of total carotenoids and ${\beta}$-cyptoxanthin from Citrus unshiu press cake. The parameters tested were $SC-CO_2$ pressure, dynamic extraction time, and concentration of ethanol added as the modifier to $CO_2$. Experimental data correlated well with the processing parameters (p<0.01), and there was a high statistically significant multiple regression relationship for the extraction of total carotenoids and ${\beta}-cyrptoxanthin$ ($R^2=0.9789$ and 0.9796, respectively). The optimal processing conditions were extraction pressure 33.4 and 37.3 MPa, extraction time 39.6 and 41.0 min, ethanol concentration 18.6 and 17.0% for total carotenoids and ${\beta}-cryptozanthin$, respectively. Maximum extraction yields predicted by RSM were 61.1 and 95.8% ppm, respectively. The extraction yield of total carotenoids increased asymptotically with the increase of the extraction pressure. It increased in proportion to extraction time and concentration of the cosolvent. The extraction yield of ${\beta}-cryptoxanthin$ increased with extraction pressure, extraction time, and concentration of the cosolvent. The extraction time and the concentration of the cosolvent, and the interaction between extraction time and the concentration of the cosolvent significantly affected the extraction yields of carotenoids from C. unshiu press cake.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.187-187
• /
• 2009

Opening of fractures induced by shear dilation or normal deformation can be a significant source of fracture permeability change in fractured rock, which is important for the performance assessment of geological repositories for spent nuclear fuel. As the repository generates heat and later cools the fluid-carrying ability of the rocks becomes a dynamic variable during the lifespan of the repository. Heating causes expansion of the rock close to the repository and, at the same time, contraction close to the surface. During the cooling phase of the repository, the opposite takes place. Heating and cooling together with the, virgin stress can induce shear dilation of fractures and deformation zones and change the flow field around the repository. The objectives of this work are to examine the contribution of thermal stress to the shear slip of fracture in mid- and far-field around a KBS-3 type of repository and to investigate the effect of evolution of stress on the rock mass permeability. In the first part of this study, zones of fracture shear slip were examined by conducting a three-dimensional, thermo-mechanical analysis of a spent fuel repository model in the size of 2 km $\times$ 2 km $\times$ 800 m. Stress evolutions of importance for fracture shear slip are: (1) comparatively high horizontal compressive thermal stress at the repository level, (2) generation of vertical tensile thermal stress right above the repository, (3) horizontal tensile stress near the surface, which can induce tensile failure, and generation of shear stresses at the comers of the repository. In the second part of the study, fracture data from Forsmark, Sweden is used to establish fracture network models (DFN). Stress paths obtained from the thermo-mechanical analysis were used as boundary conditions in DFN-DEM (Discrete Element Method) analysis of six DFN models at the repository level. Increases of permeability up to a factor of four were observed during thermal loading history and shear dilation of fractures was not recovered after cooling of the repository. An understanding of the stress path and potential areas of slip induced shear dilation and related permeability changes during the lifetime of a repository for spent nuclear fuel is of utmost importance for analysing long-term safety. The result of this study will assist in identifying critical areas around a repository where fracture shear slip is likely to develop. The presentation also includes a brief introduction to the ongoing site investigation on two candidate sites for geological repository in Sweden.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1349-1354
• /
• 2013

Sealing structure to prevent flowing hot gas into the driving device, located between the driving shaft and the liner of On-Off valve for controlling the hot gas flow path was studied. Wear occurs due to the constant movement of the driving shaft controlled by actuator on graphite as the sealing material. In this paper, the dynamic wear behavior in high temperature of graphite(HK-6) to be used as sealing material was evaluated. Reciprocating wear test was carried out for the graphite(HK-6) to the relative motion between shaft materials(W-25Re). The results of friction coefficient and specific wear rate according to contact load, sliding speed at room temperature and $485^{\circ}C$ considering the actual operating environment were evaluated. Through the SEM analysis of the worn surface, third body as lubricant films were observed and lubricant effect of third body was considered.

• Korean Journal of Community Nutrition
• /
• v.3 no.5
• /
• pp.729-738
• /
• 1998

In order to investigate the types of enteral nutrition formulas currently used in hospitals and evaluate and categorize the commercially prepared enteral nutrition formulas formulas available in the domestic market, we asked dietitians working in 6 hospitals in Seoul to complete the questionnaire and obtained compositional characteristics of 12 commercially prepared enteral nutrition formulas. The average proportion of patients receiving the commercially prepared enteral nutrition formulas(60.6%) was greater than that of patients receiving the in-hospital preparations(31.9%). In the group of patients receiving the in-hospital prepared formulas, the enteral feeding was mainly administered orally, whereas, in the group of patients receiving the commercially prepared formulas, tube feeding was the primary route of formula administration. In both groups, however, a greater proportion of patients received the formulas as total replacements of their meals and for the purpose of dietary supplementation. On the basis of major criteria for evaluation of the commercially prepared enteral nutrition formulas, the 6 products out of the 9 nutritionally complete products formulated for the purpose of dietary supplementation were grouped into the same category(standard protein, caloric density of 1kcal/ml, and tube/oral), so they were considered therapeutically comparable. However, the remaining 3 products were different in protein content(high protein) or route of administration(tube only). Of the 3 nutritionally complete products formulated specifically for the purpose of dietary therapy, 2 products were formulated for patients with renal disease, and the one product was formulated for diabetic patients. Therefore, the data in this study showed that the commercially prepared enteral nutriton formulas became an important part of the enteral nutrition for hospitalized patients in Korea, but the domestic market has not yet generated a wide variety of the formulas, not providing many choices for clinicians to manage the diets for their patients. The results of this study would be helpful for clinicians in choosing appropriate products for their patients, for manufactures in developing new products, and for regulatory authorities to establish the regulation for the broad group of heterogeneous products that are marketed and will be developed as medical foods. In addition, the process of maintaining the categories for evaluation of the commercially prepared enteral nutrition formulas should be dynamic because new products may not reasonably fit any of the existing categories.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2012.05a
• /
• pp.82.1-82.1
• /
• 2012

란타늄 산화물 ($La_2O_3$) 박막은 하프늄 산화물 ($HfO_2$) 박막보다 높은 유전 상수와 높은 밴드 오프셋으로 인해 dynamic random access memory(DRAM)에서 유전체 재료로써 연구되어 왔다. 그리고 Lanthanum이 도핑된 HfO2이 더 높은 유전 상수와 낮은 누설 전류 밀도를 갖는 다는 사실이 이전에 보고 된 바 있다. 본 연구에서 우리는 ALD를 이용하여, TiN 하부 전극 위에 $La_2O_3$의 위치를 달리하는 $La_2O_3/HfO_2$의 나노 층상조직 구조(두께 10 nm)를 금속 - 절연체 - 금속 (MIM) 구조로 제작 하였다. ALD는 좋은 comformality와 넓은 지역 균일성을 가지며, 원자수준의 두께를 조절할 수 있다는 장점을 갖고 있다. 또한, 다양한 화학 물질들을 이용한 복합적 계층구조를 만들 수 있는 점과 $HfO_2$ 및 $La_2O_3$ 계층의 수직 위치를 정확하게 조절할 수 있는 점으로 본 연구에 적합한 증착 방법이다. HfO2 속에 $La_2O_3$ 층을 깊이에 따라 삽입함으로써 $HfO_2$ 계층에 La 도핑의 효과와 더불어 TiN 하부 전극 위의 $La_2O_3$과 $HfO_2$의 차이점을 확인 하였다. $HfO_2$은 $250^{\circ}C$에서 TDMAH와 물을 사용하여, $La_2O_3$은 동일한 온도에서 $La(iPrCp)_3$와 물을 사용하여 제작되었다. 화학적 구성 및 binding 구조는 X선 광전자 분광법 (XPS)을 통해 분석하였다. 전기적 특성(유전 상수 및 누설 전류)은 Capacitance-Voltage (CV)와 Current-Voltage (IV) 측정으로 확인하였다. 결과적으로, $La_2O_3$ 또는 $HfO_2$을 한 종류만 사용한 절연층의 전기적 특성보다, $La_2O_3/HfO_2$의 나노 층상조직 구조가 더 나은 특성 (누설 전류 밀도 : $5.5{\times}10^{-7}\;A/cm^2$ @-1MV/cm, EOT : 14.6)을 갖는다는 것을 확인했고, 더불어 $La_2O_3$의 흡습 성질로 인한 화학 구조와 전기적 특성의 일부 차이를 확인하였다. 본 연구에서는 $HfO_2$ 속에 $La_2O_3$층이 TiN 하부 전극 바로 위에 위치할 때, 즉, 공기 중에 노출되지 않은 $La_2O_3/HfO_2$ 구조에서 가장 좋은 특성의 MIM capacitor를 얻을 수 있었다.

• Journal of Fashion Business
• /
• v.15 no.5
• /
• pp.69-86
• /
• 2011

The objective of this research is to unveil the dynamic changes of the trends in wedding dresses during the 20th Century. The studies were carried out in two forms; firstly by observing the actual wedding dresses worn by people at that time, and secondly by conducting formative comparisons between those dresses with the ones appeared in movies corresponding to that period. Movies provide an invaluable insight into the era's wedding dresses fashion trends since they function as intimate bridges in connection with the time's audience, and the visible imageries accurately reflect the characteristics embedded within that time frame. As there are no precedent studies regarding this topic, this thesis can serve as vital research data for the wedding dress industry. Research data regarding the actual wedding dresses were collected from books and museum web sites. The object of movies were films produced before World War II that contained both the background settings of the 20th Century and wedding dresses, of which photographic imageries were captured. Research analysis was then conducted by merging these data with findings from relevant books and internet materials. The results of the thesis are as the following: The 1900s was an extension of the 19th Century's popular fashion trend which can be characterized as the S curve silhouettes of the Edwardian period when long trains and long veils symbolized wealth and social power. In the 1910s, high waist silhouettes with soft wrinkles were prevalent as attire suitable for active mobility with practical functionality were highly regarded. During the 1920s, the flapper style became the dominant trend. Hem lines of the skirts were curled in the form of the scallop and laces were the most widely used raw materials. By the 1930s, wedding dresses that reinterpreted the glamorous sheath lines, practical two piece styles, and retro-styles became predominant. The 1940s saw the advent of ready-made wedding dresses made of synthesized materials; practical military style suits and casuals sometimes substituted the wedding dresses. And although the wedding dresses in the movies were primarily costumes to express the personalities of the characters, they were also reinterpreted as manifestations of the formative characteristics of each relative period that pursued very distinct and diverse features.

• Applied Chemistry for Engineering
• /
• v.19 no.4
• /
• pp.388-396
• /
• 2008

2 Components polyurethane coatings are widely used for the industrial coating in general because of its excellent film performance and the workability which were brought by the 3 dimensional cross linked chain structures being formed after the reaction between polyol and polyisocyanate. 2 components polyurethane can be classified into alkyd polyol, polyester polyol, acrylic polyol and polyester modified acrylic polyol depending on where it is used. This research was conducted under the conditions below; different chemical compositions of resin for paint, set the same conditions of viscosity, thinner and acid value, set alternative polyols, OH values and catalysts, set alternative polyisocyanate hardeners of the paint, measure the reaction rates and dynamic mechanical characteristics using RPT-3000, Rotation Rheometer, DMA and FTIR. The research found that the reactivity between polyol and isocyanate influences the film performance and workability depending on the catalysts, OH values and chemical compositions. We find out that different reaction rate of acrylic polyol and polyester modified acrylic polyol with poly-isocyanate is not influenced on temperature and catalyst. In addition, reaction speed of high hydroxyl content polyol is faster than low hydroxyl equivalent. These results can improve difficult working condition to apply urethane coating.

• Korean System Dynamics Review
• /
• v.1 no.2
• /
• pp.5-31
• /
• 2000

The summit meeting of the South North Korean leaders was a turning point in the relationships between the two countries. It was followed by the Red-Cross Meeting, Minister-Level Meeting, economic agreements, which have increased the relationship more colorful in both quantities and qualities. However, the half-century period for separation was too long to overcome all the problems by only one event. The two countries have quite different social systems; one politically strong person is governing the North, while many interest groups are involved in political decision making processes in the South. In short, it would take a long time to settle down all the problems residing between the two countries. A system dynamics model is developed to describe the long term dynamics of the relations between the South and North Koreas. As a first attempt, the model focuses only on the diplomatic meeting issues between the South and North. The model aggregates diplomatic issues into 5 categories; economic issues, security issues, infrastructure, cultural issues, and past problems. It assumes that there would not be any dramatic changes between the two countries. It is a conceptual model composed of around 200 variables, and should not be used as a forecast tool. However, it captures most of the logics discussed in the papers and conferences concerning the South and North Korea relations. Many sensitivity studies and Monte Carlo simulations have shown that the simulation results matches with mental models of experts; that is the model can be used as a learning tool or as a secondary opinion until the data required by the model is collected. In order to analyze the current situation, five scenarios are simulated and analyzed; the functional approach, the conditional approach, the balanced approach, the circumstantial approach, and the strategic approach. The functional approach represents that the South makes efforts in the area where the possibility of agreement is high for the next 10 years. The conditional approach is a scenario where the South impose all difficult issues as conditions for resolving other diplomatic issues. The balanced approach is resolving the five issues with the same priorities, while the circumstantial approach is resolving issues which seem to be resolved easily. Finally, another optimum approach has been seek using the system dynamics model developed. The optimum strategy (it is named as the strategic approach) was strikingly different from other four approaches. The optimum strategy is so complicated that no one could find it with mental model(or by just insights). Considering that the system dynamic model used to find the optimum is a simplifind (maybe over simplified) version of the reality, it is concluded that a well designed system dynamics model would be of great help to resolving the complicated diplomatic problems in any kind.