• Geomechanics and Engineering
• /
• 제20권6호
• /
• pp.537-546
• /
• 2020

Oil and natural gas reserves have been recognised abundantly in clayey rich rock formations in deep costal reservoirs. It is necessary to understand the sedimentary history of those reservoir rocks to well explore these natural resources. This work designs a group of laboratory experiments to mimic the physical process of the sedimentary clay-rich rock formation. It presents characterisation results of the physical properties of the artificial clayey rocks synthesized from illite clay, quartz sand and brine water by high-pressure consolidation tests. Special focus is given on the effects of illite clay content and high-stress consolidation on the physical properties. Multi-step loaded consolidation experiments were carried out with stress up to 35 MPa on mixtures constituting of the illite clay, quartz sand and brine water with five initial illite clay contents (w=85%, 70%, 55%, 40% and 25%). Compressibility and void ratio were characterised throughout the physical compaction process of the mixtures constituting of five illite clay contents and their water permeability was measured as well. Results show that the applied stress induces a great reduction of clayey rock void ratio. Illite clay contents has a significant influence on the compressibility, void ratio and the permeability of the physically synthesized clayey rocks. There is a critical illite clay content w=70% that induces the minimum void ratio in the physically synthesised clayey rocks. The SEM study indicates, in the high-pressure synthesised clayey rocks with high illite clay contents, the illite clay minerals are located in layers and serve as the material matrix, and the quartz minerals fill in the inter-mineral pores or are embedded in the illite clay matrix. The arrangements of the minerals in microscale originate the structural anisotropy of the high-pressure synthesised clayey rock. The test findings can give an intuitive physical understanding of the deep-buried clayey rock basins in energy reservoirs.

• 한국식품영양학회지
• /
• 제16권4호
• /
• pp.321-327
• /
• 2003

The reaction rates of 4-ethyl pyridine with p-methyl benzylbromide have been measured by conductometry in acetonitrile, and the rate constants of these reactions are determined in accordance with various temperatures (20, 25, 30$^{\circ}C$) and pressures (1, 200, 500, 1000 bar). The rate constants increased with the higher pressure and temperature. The activation energies and activation parameter values of these reactions are calculated by determination of the rate constants the same. The activation volume, activation compressibility coefficient and the activation entropy are all negative. The result of kinetic studies for the pressure show that this reaction proceeds in typical bimolecular nucleophilic substitution reaction.

• 한국인쇄학회지
• /
• 제20권1호
• /
• pp.28-44
• /
• 2002

Wavelet transformation in image compression is to offer higher image compressibility and high-quality by quantization and entropy encoding. More image quality is good that reconstructed image by wavelet calculation than acquire cosine transform. Therefore, wavelet itself is function if it is wavelet's feature, in this function, do processing applying difference scale and resolution. That is, this is not that fixed resolution has been decided like existent compression way, when it regulated scale, damage goes in pixel and picture looks like break without giving damage entirely in reflex even if magnify or curtail Decoding. Therefore, this paper is in Image that using new wavelet application compression way research that see applies comparing In each image noted this time compressing step by step with circle image compression efficiency recognize. Also, estimated quality pass through by printing of compressed image, investigated compression ratio of most suitable that get print of high quality and elevation of transmission speed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.288-291
• /
• 2001

Vehicle evaluation is performed on the proving ground, and durability test and dynamic test cost lots of money and time. Doing replace real vehicle experiment with similar experiment environment, it will take us much more useful advantages. Suspension simulator is required the robust and high-reliability and used widely. But it's natural of high-leveled control technique to manage to be fitted fluid system's property and complex that is for the lack of self-damping, nonlinearity, compressibility. In designing and evaluating simulator, it is important to understand the capability of kinematic and static performances. In this paper, an kinematic modeling and analysis has been presented using ADAMS to design that can reproduce longitudinal, lateral, and vertical force.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.367-374
• /
• 2005

In order to construct the farm road in Shi-Hwa project, coarse soils excavated from hillsides have been used as road materials for reclamation. Suitable borrow pits available in land are now limited and also they bring about environmental problems when soils are excavated at the borrow pits and transported to the site. When using fine and wet materials as fill, however, many engineering problems can be encountered. Usually, the materials have high water contents, low strength, and high compressibility. In order to use them, we need research that can improve the inherent properties of those materials. In order to tackle with the problems, researches on soil improvement involve mixing lime geo-cement to the fine wet soils. A lab model test is necessary to verify effectiveness and comparison of those techniques. A field test is also required to show applicability and to find problems that may exist in the design and construction stages.

• 패션비즈니스
• /
• 제10권3호
• /
• pp.23-30
• /
• 2006

Various high-touch textile products have been developed recently including ultra-fine denier filament yarn fabrics. The touch or hand of high value-added products is of prime importance. Physical and mechanical properties of fabric specimens, ultra-fine denier filament yarn fabric specimen, 100% wool fabric and wool/polyester 50:50 fabric,were measured using the KES. Compressibility of the ultra-fine denier fabric is recommendable, possibly due to the good bulk property of the specimen. Overall, the THV of the ultra-fine denier fabric is positioned between those of the 100% wool fabric and wool/polyester 50:50 fabric. Observed differences in the physical and mechanical properties explain the fabric specimen characteristics reasonably.

• 한국지반공학회지:지반
• /
• 제14권4호
• /
• pp.151-162
• /
• 1998

유기질 지반은 압축성과 투수성이 매우 커서 구조물을 시공하는 데 많은 문제를 발생시켜 토지의 효율적인 이용을 어렵게 한다. 이러한 지반에 특별한 공법을 적용하여 유기물의 함량을 감소시킬 수 있다면, 지반의 공학적 성질을 어느 정도 개선할 수 있을 것이다. 본 연구에서는 유기질 지반내 유기물 함량을 감소시켜 시공후 침하문제를 해결하기 위해 호기성 생분해처리법(aerobic biodegradation)을 이용하여 지반내 유기물의 함량을 감소시키는 방안에 대해 연구하였다. 생분해처리 효과를 높이기 위해 고령토에 톱밥을 심어 조제한 모형 유기질 지반에 산소를 공급하고, 시간 에 따른 용존산소량, 유기물 함량의 변화를 관찰하였다. 산소원으로는 과산화수소 수용액과 산소가 스를 사용하였다. 본 실험을 위해 새로 제작한 직경 130 mm, 높이 300 mm 의 압축시험기로 100 일 동안 모형압축시험을 하였다. 시험결과 산소가스와 영양분을 공급한 시료는 그렇지 않은 경우에 비해 압축량이 30% 정도 더 크게 나타났다. 영양분으로는 $K_2aHPO_4,\; 보다 \;NaNO_2$>, 를 첨가하는 것이 더욱 효과적이었다. 또한 시료에 아지드 나트릅을 사용하여 미생물의 작용을 확인하였다.

• 한국지반환경공학회 논문집
• /
• 제7권3호
• /
• pp.43-54
• /
• 2006

채취된 초기 간극수를 오염물질로 치환시킨 점토시료를 대상으로 일축압축시험, 삼축압축시험, 압밀시험을 수행하여 오염물질 성상에 따른 오염점토의 역학적 특성변화를 분석하였으며, MT3D 해석모델을 이용하여 매립지 성토제방의 점토 차수층을 통한 오염물질의 거동 특성을 파악하였다. NaCl 수용액으로 치환된 시료의 경우, 농도가 증가할수록 강도, 압축성, 투수성이 증가되었다. 침출수로 포화시킨 시료의 경우, NaCl 수용액으로 포화시킨 시료에 비해 강도, 압축성의 증가현상이 크게 나타난 반면 면모화 정도가 큼에도 불구하고 투수계수는 오히려 작게 나타났다. 오염물질 이동 해석결과, 초기 염소이온 농도가 클수록 측정농도도 커지며, 시간경과에 따라 농도는 비선형적으로 증가되었다. 농도감쇄 관계식을 유도하여 이동거리를 예측한 결과, 초기 농도가 클수록 이동거리도 크게 나타났다.

• 펄프종이기술
• /
• 제37권3호
• /
• pp.23-32
• /
• 2005

A change of z-directional structural and surface properties by calendering has a great influence on liquid penetration into a sheet. It could be also important for multi-ply sheet because it contacts liquid dunhg coating or converting process. Therefore, this study was aimed to evaluate of a change of z-directional structure in multi-ply sheet by calendering. To do this, multi-ply sheets were prepared with various raw materials and calendered at the different pressure and temperature conditions. In multi-ply sheet which consisted of one kind of pulp fiber, thickness reductions were higher in top and bottom plies than in middle plies. And in the case of soft nip calender treatment with high temperature, top layer which was in contact with heating roll showed the highest reduction of thickness. Hard nip calender treatment showed U-shaped density profile in z-direction, but compression profile by SNC treatment was dependent on calendering condition. To examine z-directional structure of multi-ply sheet which was composed of different raw material for each layer, CLSM (Confocal Laser Scanning Microscopy) analyses were carried out on cross direction of sheet. It turned out to be a useful tool for investigating z-directional analysis. As a result, variation of thickness reduction in z-direction is dependent on ply structure, compressibility of pulp fiber, and calendering condition.

• Ocean and Polar Research
• /
• 제37권1호
• /
• pp.73-80
• /
• 2015

In order to determine the appropriate volume of the a pressure compensator of deep seabed mining robots, this paper reports on an experimental test for oil volume change in an oil-filled box. At the design stage of underwater robots, it is crucial to determine the capacity of the hydraulic compensator which is replenished as much as the contracted oil volume of the robots. A pilot mining robot, MienRo was designed to work under 6,000 m in the deep sea. The hydraulic actuating oil and pressure compensating oil of MineRo may be exposed at a hydrostatic pressure environment of 600 bar. Although the oil can be assumed to be incompressible, its volume is actually changed under high pressure conditions due to air contained in the oil and oil contraction. To determine the capacity of the pressure compensator, the oil contraction rate should be verified through an experimental test using a hyperbaric chamber.