• 한국정보통신학회논문지
• /
• 제7권2호
• /
• pp.250-254
• /
• 2003

본 논문에서는 2GHz 대역 RF 대역통과 필터 응용을 위한 FBAR 소자에 대한 연구를 발표한다. 본 연구의 FBAR 소자는 크게 상부 및 하부 전극 사이에 압전체(AlN)가 삽입되어 있는 공진부와 SiO2/W이 여러층으로 적층되어 있는 음향반사층 두 부분으로 구성되어 있다. RF sputtering 방법으로 증착된 AlN 박막은 c축이 기판에 수직한 정도가 우수한 c축 우선 배향성을 갖는다. 이때 결정립(grain)은 길고 얇은 주상형(columnar)을 보인다. 뿐만아니라, 우수한 품질계수(4300)와 반사손실(37.19 dB)도 얻어졌다.

• 한국해양공학회지
• /
• 제15권2호
• /
• pp.88-93
• /
• 2001

In this paper, joints of Cu-1Cr-0.1Zr alloy to STS316L were performed by friction welding method. Particularly, Cu-1Cr-0.1Zr alloy is attractive candidate as nuclear power plant material and exibit the best combination of high strength and good electrical and thermal conductivity of any copper alloy examined. The stainless steel is a structural material while copper alloy acts as a heat sink material for the surface heat flux in the first wall. So, in this paper, not only the development of optimizing of friction welding with more reliability and more applicability but also the development of in-process real-time weld quality (such as strength and toughness) evaluation technique by acoustic emission for friction welding of such nuclear reactor component of Cu-1Cr-0.1Zr alloy to STS316L steel sere performed.

• 말소리와 음성과학
• /
• 제4권3호
• /
• pp.151-159
• /
• 2012

The purpose of this study is to evaluate the prevalence of voice disorders and the Korean voice handicap index in the elderly. For this study, 169 elderly performed two types of questionnaires and vowel /a/ prolongation. Self-reported voice symptoms and the Korean voice handicap index were analyzed and acoustic voice evaluation was performed by MDVP. The results showed that the prevalence of voice disorders in the elderly are significantly higher than that of adults in self-reports. In acoustic evaluation, 32.2% of the male elderly and 40.9% of the female elderly exceeded the thresholds of Jitter (%), Shimmer (%) and NHR. In addition, Korean voice handicap index scores of the female elderly are significantly higher than those of female adults. These findings indicate the high frequency of voice disorders in the elderly and the need to focus on this group. Additional studies on the voice related quality of life for the elderly are needed.

• 한국정밀공학회지
• /
• 제22권8호
• /
• pp.182-191
• /
• 2005

It is very important to obtain a high quality of bone image for an accurate ultrasonic measurement of bone mineral density. In this study, we suggested a technique to acquire an optimal image by adapting an acoustic lens and a properly selected ultrasonic probe. Also, we have applied an image processing algorithm with which automatically makes a decision of brightness and contrast of image by generating threshold level, a composition of ultrasonic data, an elimination of noise using modified median filter, and a real time interpolation. We could confirm much improved resolution of bone image with acoustic lens attached to the ultrasonic probe and with the image processing algorithm suggested in this study. Therefore, it became possible to precisely diagnose the osteoprosis using ultrasonic imaging technique.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.42-46
• /
• 2000

In this paper, joints of Cu-1Cr-0.1Zr alloy to STS316L were performed by friction welding method. Cu-1Cr-0.1Zr alloy is attractive candidate as nuclear power plant material and exibit the best combination of high sts good electrical and thermal conductivity of any copper alloy examined. The stainless steel is a structural material who alloy acts as a heat sink material for the surface heat flux in the first wall. So, in this paper, not only the develop optimizing of friction welding with more reliability and more applicabililty but also the development of in-process rear quility(such as strength and toughness) evaluation technique by acoustic emission for friction welding of such nuclear component of Cu-1Cr-0.1Zr alloy to STS316L steel were performed.

• 한국정밀공학회지
• /
• 제22권10호
• /
• pp.90-98
• /
• 2005

A monitoring system is necessary to make the polishing process more reliable in order to ensure the high quality and performance of the final products. Generally, AE (Acoustic Emission) is known to be closely related to the material removal rate (MRR). As the surface becomes rougher, the MRR and AE increase. Therefore, the surface roughness can be indirectly estimated using the AE signal measured during the polishing. In this study, an AE sensor-based monitoring system was fabricated to detect the very small AE signal resulting from the friction between a tool and a workpiece during polishing. The performance of this monitoring system was estimated according to polishing conditions, the relation between the level of the AE RMS and the surface roughness during the polishing was investigated.

• 음성과학
• /
• 제8권1호
• /
• pp.7-19
• /
• 2001

The acoustic parameters of nine Korean numbers were analyzed by Praat, a speech analysis software, and synthesized by SenSynPPC, a Klatt formant synthesizer. The overall intensity, pitch and formant values of the numbers were modified dynamically by a step of 1 dB, 1 Hz and 2.5% respectively. The study explored the sensitivity of listeners to changes in the three acoustic parameters. Twelve subjects (male and female) listened to 390 pairs of synthesized numbers and judged whether the given pair sounded the same or different. Results showed that subjects perceived the same sound quality within the range of 6.6 dB of intensity variation, 10.5 Hz of pitch variation and 5.9% of the first three formant variations. The male and female groups showed almost the same perceptual ranges. Also, an asymmetrical structure of high and low boundary was observed. The ranges may be applicable to the development of a speaker identification system while the method of synthesis modification may apply to its evaluation data.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.170-173
• /
• 2002

The object of this study is to investigate the effect of compounded welding through the AE (Acoustic Emission) characteristics on static tensile test. This study was carried out a SM 490A, high tension steel using the low hydrogen type E4316 of electronic shield metal arc welding and compound wire of $CO_2$gas arc welding. $CO_2$welding, weak in the intensity of HAZ (Heat Affected Zone), can be improved by being combined with coated arc welding, Coated arc welding, weak in the intensity of the bead, can be improved by being combined with $CO_2$welding. Especially, electronic coated arc welding and $CO_2$welding complement the mechanical intensity of HAZ and the bead with each other. So, compounded welding increases the intensity in the special parts and enhances the quality of goods.

• 한국생산제조학회지
• /
• 제20권3호
• /
• pp.304-309
• /
• 2011

A monitoring system for magnetic abrasive polishing process is necessary to ensure the polishing products the high quality and integrity. Acoustic emission (AE) signal is known to reflect the material removal phenomena in other machining processes. In a case of the magnetic abrasive polishing of non-magnetic materials, application of AE method is very difficult because of lower machining force on the surface of workpiece and the level of AE signal is extremely lower. In this study, AE sensor-based monitoring system is applied to the magnetic abrasive polishing. The relation between the level of the AE RMS and the surface roughness during the magnetic abrasive polishing of magnesium alloy steel is investigated.

• 대한후두음성언어의학회지
• /
• 제12권2호
• /
• pp.140-144
• /
• 2001

Backgrounds & Objectives : Prolonged hearing loss was considered as one of the factors which have the potential to cause vocal changes. However, the analysis of quality of phonation in hearing loss patients has not been achieved enough. The purpose of the study was to evaluate the difference in objective acoustic parameters between long-term hearing impaired patients and normal control group. Material & Methods : The material of this investigation comprised a group of 20 patients (M : F=10 : 10) with moderate or profound hearing loss(over 50dB). The duration of all hearing loss was over 1 year. All of them underwent the acoustic examinations comprising electroglottography, multidimensional voice program and formant analysis during phonation of the bowels /a/ with free confortable tone and /i/ with voluntary high tone. The results of the acoustic examinations were compared with those of a control group, composed of 20 sex- and age-matched normal hearing subjects. Results : In the male hearing loss subjects, the significant increase was detected in pitch and shimmer during phonation of /a/ and in pitch during phonation of /i/. In addition, this group was characterized by decreased fundamental frequency during phonation of /i/. In female, there was no difference between hearing loss group and normal control group except a decreased formant 1 frequency. Conclusion : Long-term moderate and profound sensorineural hearing loss could affect the objective voice parameters.