• Korean Journal of Ecology and Environment
• /
• v.44 no.1
• /
• pp.31-41
• /
• 2011

To optimize the natural chemical agents against nuisance phytoplankton, we examined algal removal activity (ABA) of Plant-Mineral Composite (PMC), which already developed by our teams (Kim et al., 2010), on various conditions. The PMC are consisted of extracted-mixtures with indigenous plants (Camellia sinensis, Quercusacutissima and Castanea crenata) and minerals (Loess, Quartz porphyry, and natural zeolite), and characterized by coagulation and floating of low-density suspended solids. A simple extraction process was adopted, such as drying and grinding of raw material, water-extraction by high temperature-sonication and filtering. All tests were performed in 3 L plastic chambers varying conditions; six different concentrations ($0{\sim}1.0\;mL\;L^{-1}$), six light intensities ($8{\sim}1,400\;{\mu}mol\;m^{-2}s^{-1}$), three temperatures ($10{\sim}30^{\circ}C$), four pHs (7~10), five water depths (10~50 cm), and three different waters dominated by cyanobacteria, diatom, and green algae, respectively. Results indicate that the highest ABA of PMC was seen at $0.05\;mL\;L^{-1}$ in treatment concentrations, where showed a reduction of more than 80% of control phytoplankton biomass, while $1,400\;{\mu}mol\;m^{-2}s^{-1}$ in light intensity (>90%), $20{\sim}30^{\circ}C$ temperature (>60%), 7~9 in pH (>90%), below 50 cm in water depth (>90%), and cyanobacterial dominating waters (>80%), respectively. Over the test, ABA of PMC were more obvious on the algal biomass (chlorophyll-${\alpha}$) than suspended solids, suggesting a selectivity of PMC to particle size or natures. These results suggest that PMC agents can play an important role as natural agents to remove the nuisant algal aggregates or seston of eutrophic lake, where occur cyanobacterial bloom in a shallow shore of lake during warm season.

• Clean Technology
• /
• v.27 no.4
• /
• pp.332-340
• /
• 2021

With the recent reinforcement of emission standards, it is necessary to make efforts to reduce NOx from air pollutant-emitting workplaces. The NOx reduction method mainly used in industrial facilities is selective catalytic reduction (SCR), and the most commercial SCR catalyst is the ceramic honeycomb catalyst. This study was carried out to reduce the NOx emitted from steel plants by applying De-NOx catalyst coated on metallic monolith. The De-NOx catalyst was synthesized through the optimized coating technique, and the coated catalyst was uniformly and strongly adhered onto the surface of the metallic monolith according to the air jet erosion and bending test. Due to the good thermal conductivity of metallic monolith, the De-NOx catalyst coated on metallic monolith showed good De-NOx efficiency at low temperatures (200 ~ 250 ℃). In addition, the optimal amount of catalyst coating on the metallic monolith surface was confirmed for the design of an economical catalyst. Based on these results, the De-NOx catalyst of commercial grade size was tested in a semi-pilot De-NOx performance facility under a simulated gas similar to the exhaust gas emitted from a steel plant. Even at a low temperature (200 ℃), it showed excellent performance satisfying the emission standard (less than 60 ppm). Therefore, the De-NOx catalyst coated metallic monolith has good physical and chemical properties and showed a good De-NOx efficiency even with the minimum amount of catalyst. Additionally, it was possible to compact and downsize the SCR reactor through the application of a high-density cell. Therefore, we suggest that the proposed De-NOx catalyst coated metallic monolith may be a good alternative De-NOx catalyst for industrial uses such as steel plants, thermal power plants, incineration plants ships, and construction machinery.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.701-711
• /
• 2020

Purpose: In this study, the risk of flammability of a liquid mixture was experimentally confirmed because the purpose of this study was to confirm the increase or decrease of the flammability risk in a mixture of two substances (combustible+combustible) and to present the risk of the mixture. Method: Flash point test method and result processing were tested based on KS M 2010-2008, a tag sealing test method used as a flash point test method for crude oil and petroleum products. The manufacturer of the equipment used in this experiment was Japan's TANAKA. The flash point was measured with a test equipment that satisfies the test standards of KS M 2010 with equipment produced by the company, and LP gas was used as the ignition source and water as the cooling water. In addition, when measuring the flash point, the temperature of the cooling water was tested using cooling water of about 2℃. Results: First of all, in the case of flammable + combustible mixtures, there was little change in flash point if the flash point difference between the two substances was not large, and if the flash point difference between the two substances was low, the flash point tended to increase as the number of substances with high flash point increased. However, in the case of toluene and methanol, the flash point of the mixture was lower than that of the material with a lower flash point. Also, in the case of a paint thinner, it was not easy to predict the flash point of the material because it was composed of a mixture, but as a result of experimental measurement, it was measured between -24℃ and 7℃. Conclusion: The results of this study are to determine the risk of mixtures through experimental studies on flammable mixtures for the purpose of securing the effectiveness of the details of the criteria for determining dangerous goods in the existing dangerous goods safety management method and securing the reliability and reproducibility of the determination of dangerous goods Criteria have been presented, and reference data on experimental criteria for flammable liquids that are regulated in firefighting sites can be provided. In addition, if this study accumulates know-how on differences in test methods, it is expected that it can be used as a basis for research on risk assessment of dangerous goods and as a basis for research on dangerous goods determination.

• Journal of Science Education
• /
• v.32 no.2
• /
• pp.71-86
• /
• 2008

The purpose of this study was to apply After-school programs related to sub-chapter 'The Change of Weather', and thereby to investigate the effect of After-school program on science-related attitude and learning achievement of students, and interaction between treatment methods and students' learning ability. The subjects of study consisted of 2nd grade students of sixty four students in high school. Sixty four students were divided into two categories by experimental and control groups on the basis of midterm examination before teaching treatment. The experimental groups have received four After-school programs including making models of a weather front, measurement of wind, measurement of temperature and the dew point, making a three-dimensional weather chart which were developed by researcher for six times. The control groups have received the instruction through the conventional teaching methods. Seventy questions within seven frameworks of TOSRA have been used in this study as an evaluation instrument of science-related attitude. Learning achievement has been evaluated using an instrument developed by researcher. The scores of both pre-test and post-test were estimated by ANCOVA. The results of this study can be summarized as follows. (1) After-school programs were more effective in progressing the three categories of science related attitude of high school students i.e. pleasure of science class(p<.05), reception of scientific attitude(p<.01), attitude about a science research(p<.05) than conventional teaching methods. (2) Experimental groups showed statistically significant improvement on learning achievement than control groups(p<.05). (3) The effect of treatment methods on students' learning ability has been improved in experimental groups more positively than control groups(p<.05). High level students in experimental groups showed significant improvement on learning achievement than low level students according to the representing profile plot. But there were no significant interaction between treatment methods and students' learning ability(p>.05) In conclusion, the After-school programs have positive effect on the improvement of science related attitude and learning achievement.

• Korean Journal of Soil Science and Fertilizer
• /
• v.24 no.3
• /
• pp.200-205
• /
• 1991

To evaluate cold tolerance of rice cultivars on the basis of a relationship between cold tolerance in the field test and a biochemical character, transition-temperature of respiratory activity of mitochondria(TRM) which were isolated from different parts and at different growth stages and from etiolated rice seedling was investigated, and its relationship with degree of cold tolerance(DCT) in the field experiment was studied. The results obtained were summarized as follows. 1. The transition-temperature of respiratory activity of mitochodria (TRM) isolated from etiolated seedling ($25^{\circ}C$, two week-grown in the dark) of cold tolerant cultivars tended to be low, while that of cold susceptible cultivars to be high. 2. The correlation between TRM of etiolated seedling and the degree of cold tolerance(DCT) was $r=0.8935^{**}$ in 1988 and $r=0.8236^{**}$ in 1989. The correlation coefficient between TRM of 4-leaf seedling and DCT was $0.6239^{**}$ 3. TRM of young panicle was correlated with DCT except a few varieties. 4. TRM of seedling increased with growth as $12.5^{\circ}C$, $14.5^{\circ}C$, $15.5^{\circ}C$ and $16.5^{\circ}C$ at 1, 2, 3~4 and 5weeks respectively. 5. The transition temperature of mitochondrial respiratory activity was not significantly influenced by growth stages as $15.0{\sim}16.0^{\circ}C$ in Pungsanbyeo and $17.0{\sim}18.0^{\circ}C$ in Satbyelbyeo, while it was significantly different depending upon the degree of cold tolerance(tolerant, medium, susceptible).

• Korean Journal of Medicinal Crop Science
• /
• v.11 no.3
• /
• pp.236-245
• /
• 2003

The study was performed for elucidating angiotensin converting enzyme (ACE) inhibitory activity and comparing antioxidative activity of Panax ginseng extracts prepared at different conditions. Total phenolic content, inhibitory activity on ACE and antioxidative effects were tested on 10 ethanolic extracts and correlation coefficient between total phenolic content and physiological activity was calculated. Yield and total phenolic content of 50% ethanolic extract prepared at $85^{\circ}C$ exhibited the highest value as 42.52% and 0.82%, respectively. Among the fractions obtained from 50% ethanolic extract prepared at room temperature, water fraction showed the highest value in yield as 72.08% and ethyl acetate fraction did in total phenolic content as 6.59%. In the test on ACE inhibitory activity, 50% ethanolic extract obtained at room temperature indicated the strongest effect of 93.8% which was higher than 85.2% of commercialized ACE inhibitor and solvent fractions showed potent inhibitory activity in order of hexane fraction, diethyl ether fraction, ethyl acetate fraction, butanol fraction and water fraction at concentration of $4000{\mu}g/ml$. 50% Ethanolic extract prepared at $85^{\circ}C$ had the most potent inhibition effect on human LDL oxidation as 78.2% at $200{\mu}g/ml$ and the other extracts also did above 60%. Diethyl ether fraction and ethyl acetate fraction showed strong inhibition activity $(34.38%{\sim}78.13%)$ on LDL oxidation at concentration of $10{\sim}200\;{\mu}g/ml$. From the statistical analysis via SAS program, correlation coefficient between total phenolic content and ACE inhibitory effect was 0.6353 at P<0.05. Conclusively, this report showed that the most efficient extraction condition for elevating inhibitory activity on ACE and LDL oxidation, phenolic content and yield from Panax ginseng was 50% ethanol extraction at room temperature or high temperature condition. And Panax ginseng would be used for preventing hypertension or atheroscrelosis for man via inhibitory action on ACE and LDL oxidation.

• Korean Journal of Breeding Science
• /
• v.41 no.3
• /
• pp.299-305
• /
• 2009

A new six-rowed naked barley cultivar "Jinjuchal" with high whiteness after cooking and high $\beta$-glucan content was developed from the cross between 'Jinmichapssalbori' with high winter hardiness, lodging tolerance, grain whiteness and pearling yield, and 'Suwon 333' with waxy endosperm by the Honam Agricultural Research Institute (HARI), NICS, RDA in 2007. An elite line, SB962002G-B-B-B-84-4 was selected in 2002 and designated as 'Iksan 79' It showed good agronomic performance in the regional yield trials (RYT) from 2005 to 2007 and was released with the name of "Jinjuchal" possessing high whiteness and low proanthocyanidin waxy endosperm. The average heading and maturing dates of "Jinjuchal" were April 27 and June 1 in paddy field, which were same and one day later than those of the check cultivar 'Saechalssalbori' respectively. The new cultivar, "Jinjuchal" had 81 cm of culm length that was 1cm longer than that of 'Saechalssalbori' and 4.9 cm of spike length. It showed 673 spikes per $m^2$, 56 grains per spike, 27.0 g of 1,000-grain weight, and 752 g of test weight. "Jinjuchal" showed stronger hardiness and better resistance to powdery mildew and BaYMV (Barley yellow mosaic virus) than those of the check cultivar, 'Saechalssalbori' It showed higher $\beta$-glucan content(8.4%) and water absorption rate than those of the check cultivar, 'Saechalssalbori' Its average yield of the pearled grain in the regional yield trial was 3.79 MT/ha in upland, and 3.73 MT/ha in paddy field, which were 1% lower and 3% higher than those of the check cultivar, respectively. Total phenol and proanthocyanidin contents were 4.2 and 0.2 mg/g, respectively. This cultivar is suitable for the area of the daily minimum temperature above $-6^{\circ}C$ in January in Korean peninsula.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.10 no.1
• /
• pp.45-53
• /
• 2012

The metal chloride wastes from a pyrochemical process to recover uranium and transuranic elements has been considered as a problematic waste difficult to apply to a conventional solidification method due to the high volatility and low compatibility with silicate glass. In this study, a dechlorination approach to treat LiCl-KCl waste for final disposal was adapted. In this study, a $SiO_2-Al_2O_3-P_2O_5$ (SAP) inorganic composite as a dechlorination agent was prepared by a conventional sol-gel process. By using a series of SAPs, the dechlorination behavior and consolidation of reaction products were investigated. Different from LiCl waste, the dechlorination reaction occurred mainly at two temperature ranges. The thermogravimetric test indicated that the first reaction range was about $400^{\circ}C$ for LiCl and the second was about $700^{\circ}C$ for KCl. The SAP 1071 (Si/Al/P=1/0.75/1 in molar) was found to be the most favorable SAP as a dechlorination agent under given conditions. The consolidation test revealed that the bulk shape and the densification of consolidated forms depended on the SAP/Salt ratios. The leaching test by PCT-A method was performed to evaluate the durability of consolidated forms. This study provided the basic information on the dechlorination approach. Based on the experimental results, the dechlorination method using a $SiO_2-Al_2O_3-P_2O_5$ (SAP) could be considered as one of alternatives for the immobilization of waste salt.

• Journal of Energy Engineering
• /
• v.11 no.1
• /
• pp.1-9
• /
• 2002

The purpose of this study is to maintain high efficiency and reasonable use of cool thermal storage systems operated in the domestic building sector. As the result of efficiency test from the five types of operated cool storage systems on the condition that COP ranges are 2.6 to 3.4 during the day time and 2.1 to 3.0 during the night time and it decreased by more than 30% of rated COP given 3.8 to 3.0. The Analysis of cool storage rate shows that only 3 (21.4%) systems out of 15 buildings hold to over 40% capacity for its total capacity. To prevent the decrease in operating efficiency, it should correct the malfunction of 3-way valve and expansion valve and the mistake of control values for schedule program and increase cooling tower capacity. In order to improve piping line, it needs bypass brine line off refrigerator, separation of chilled water line with Ice Slurry system at day and night time and speed control of chilled and warm water pumps. This study does require the more studies on improving difficulty of increasing cooling load with Ice on Coil system, waterproofing with Ice Ball system, COP drop during the night time with Ice Lens, low operating temperature during the day time with Ice Slurry and increasing of Power loss due to hot gas de-icing with Ice Harvest in the future.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.426-431
• /
• 2007

When a high-energy ultrasound propagates through a solid body that contains a crack or a delamination, the two faces of the defect do not ordinarily vibrate in unison, and dissipative phenomena such as friction, rubbing and clapping between the faces will convert some of the vibrational energy to heat. By combining this heating effect with infrared imaging, one can detect a subsurface defect in material in real time. In this paper a realtime detection of the brazing defect of thin Inconel plates using the UIR (ultrasonic infrared imaging) technology is described. A low frequency (23 kHz) ultrasonic transducer was used to infuse the welded Inconel plates with a short pulse of sound for 280 ms. The ultrasonic source has a maximum power of 2 kW. The surface temperature of the area under inspection is imaged by an infrared camera that is coupled to a fast frame grabber in a computer. The hot spots, which are a small area around the bound between the two faces of the Inconel plates near the defective brazing point and heated up highly, are observed. And the weak thermal signal is observed at the defect position of brazed plate also. Using the image processing technology such as background subtraction average and image enhancement using histogram equalization, the position of defective brazing regions in the thin Inconel plates can be located certainly.