• Journal of Digital Contents Society
• /
• v.3 no.2
• /
• pp.143-152
• /
• 2002

In this paper, we present the general interface, label-switched path structure and link bundling in GMPLS to improve the scalability. The LMP protocol is also introduced to efficiently manage the internal link, and the signaling protocol, hierarchical path setup, hi-directional LSP setup and suggested label method are presented. Finally, the techniques of protection and restoration are presented. In specific, various applicable restoration techniques in GMPLS are discussed.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.307-309
• /
• 2001

인터넷 환경의 서버-클라이언트 모델에서 네트웍 부하를 줄이고 시스템 성능을 향상시키기 위한 방법으로 캐쉬가 있다. 모바일 클라이언트의 경우 적은 메모리와 스토리지 용량으로 인하여 캐쉬를 좀 더 효과적으로 다루는 방법이 필요하다. 특히 모바일 클라이언트 내의 캐쉬 된 데이터가 무효화(invalidation)되는 문제는 무선 네트웍의 낮은 대역폭과 불안정상 등의 관점에서 기존의 인터넷 환경과 다르게 접근될 필요가 있다. 또한 모바일 클라이언트는 리소스(배터리) 등의 문제로 인해 항상 네트웍과 지속적으로 연결을 하지 못하므로, 본 연구는 이러한 환경에서 캐쉬 된 데이터의 무효화 문제 해결을 위한 계층적 캐쉬 알고리즘을 제시한다. 서버-클라이언트 사이에 MSS(Mobile Switching Station)모델을 구성하고 AVI-based 알고리즘을 바탕으로 모바일 클라이언트에 대한 무효성 보고 횟수를 최소화하는 방법을 제시한다.

• Convergence Security Journal
• /
• v.12 no.1
• /
• pp.35-42
• /
• 2012

Increase of data traffic and the advent of new real-time services require to change from the traditional TDM-based (Time Division Multiplexing) networks to the optical networks that soft and dynamic configuration. Voice and lease line services are main service area of the traditional TDM-based networks. This optical network became main infrastructure that offer many channel that can convey data, video, and voice. To provide high resilience against failures, Packet-optical networks must have an ability to maintain an acceptable level of service during network failures. Fast and resource optimized lightpath restoration strategies are urgent requirements for the near future Packet-optical networks with a Generalized Multi-Protocol Label Switching(GMPLS) control plane. The goal of this paper is to provide packet-optical network with a hierarchical multi-layer recovery in order to fast and coordinated restoration in packet-optical network/GMPLS, focusing on new implementation information. The proposed schemes do not need an extension of optical network signaling (routing) protocols for support.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.61-64
• /
• 2007

MPLS networks architectures have been prevailed as scalable approach to provide quality of service in the Internet. Many researches have been mainly focused on scalability and multi-path calculation scheme for failure restoration. However, the MPLS network have an scalability problem about traffic, and the existing failure restoration methods are wasted resources, and it has the problem that loss of a packet by a lot of delay occurs in too. Therefore in this paper, we propose a H-MPLS (Hierachical-Multiprotocol Label Switching)network for rapidly failure restorations and effective management of network extended. The proposed H-MPLS Network apply LSP multi-path routing algorithm and consists of several MPLS. After comparing the performance among the existing failure restoration methods with various network models, we use NS simulator in order to analyze the performance. Finally, we present an improvement scheme of the efficiency and scalability.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.5
• /
• pp.41-51
• /
• 1996

In this paper, anew parallel processing system based on a cluster architecture which provides scalability of a parallel processing system while maintains shared memory multiprocessor characteristics is proposed. In recent days low cost, high performnce microprocessors have led to construction of large scale parallel processing systems. Such parallel processing systems provides large scalability but are mainly used for scientific applications which have large data parallelism. A shared memory multiprocessor system like TICOM is currently used as aserver for the commercial application, however, the shared memory multiprocessor system is known to have very limited scalability. The proposed architecture can support scalability and performance of the parallel processing system while it provides adaptability for the commerical application, hence it can overcome the limitation of the shared memory multiprocessor. The architecture and characteristics of the proposed system shall be described. A proprietary hierarchical crsossbar network is designed for this system, of which the protocol, routing and switching technique and the signal transfer technique are optimized for the proposed architecture. The design trade-offs for the network are described in this paper and with simulation usihng the SES/workbench, it is explored that the network fits to the proposed architecture.

• The Bulletin of The Korean Astronomical Society
• /
• v.40 no.2
• /
• pp.32.1-32.1
• /
• 2015

The gradual infall of small dark matter halos onto larger ones has become a relatively straightforward aspect of the standard hierarchical formation paradigm. What happens to the baryons they contain, however, is less well understood. Of special relevance are the processes that regulate and ultimately suppress star formation in galaxies in the early universe. The z=1.5-2.5 epoch is then particularly interesting as a transition period when global star-formation in the universe starts peaking but also where the first ostensibly collapsed and virialized galaxy clusters appear, along with segregated galaxy populations. From a theoretical point of view, the mode of gas accretion in massive halos is also expected to change around this time, switching from a cold to a hot phase and affecting the build-up and evolution of the galaxies they host. A lot of effort has thus been devoted to the search for high-redshift structures, in particular galaxy clusters, through a variety of methods. However, as the limited area for which deep datasets are available remains relatively limited, only few massive z>1.5 structures have been found so far. Here I will instead discuss the regulation of star-formation in lower-mass, X-ray detected halos at z~2 and its implication for galaxy quenching at high redshift. As these smaller, group-size halos are vastly more abundant and structurally simpler than massive clusters, they allow for true statistical studies and offer a novel way to probe environmental effects in this transitional epoch.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.3
• /
• pp.238-248
• /
• 2016

In this study, an automatic command mode transition strategy of direct power control (DPC) is proposed for permanent magnet synchronous generators (PMSGs) medium-voltage (MV) offshore wind turbines (WTs). Benchmarking against the control methods are performed based on a three-level neutral-point-clamped (NPC) back-to-back type voltage source converter (VSC). The ramping rate criterion of complex power is utilized to select the switching vector in DPC for a three-level NPC converter. With a grid command and an MPPT mode transition strategy, the proposed control method automatically controls the generated output power to satisfy a grid requirement from the hierarchical wind farm controller. The automatic command mode transition strategy of DPC is confirmed through PLECS simulations based on Matlab. The simulation result of the automatic mode transition strategy shows that the proposed control method of VOC and DPC achieves a much shorter transient time of generated output power than the conventional control methods of MPPT and VOC under a step response. The proposed control method helps provide a good dynamic performance for PMSGs MV offshore WTs, thereby generating high quality output power.

• Industrial Engineering and Management Systems
• /
• v.3 no.1
• /
• pp.52-58
• /
• 2004

This report examines the issue of designing an efficient production system by increasing several types of flexibility. Increasing manufacturing flexibility is a key strategy for efficiently improving market responsiveness in the face of uncertain market demand for final products. The manufacturing system comprises multiple plants, of which individual plants have multiple manufacturing lines that are designed to produce limited types of products in accordance with their size and materials. Imbalance in the workload occurs among plants as well as among manufacturing lines because of fluctuations in market demand for final products. Thereby, idleness of some manufacturing lines and longer lead times in some manufacturing lines occur as a result of the high workload. We clarify how these types of flexibility affect manufacturing performance by improving only one type of flexibility or by improving multiple types of flexibility simultaneously. The average lead time and the imbalance in workload are adopted as measures of manufacturing performance. Three types of manufacturing flexibility are interrelated: machine flexibility, routing flexibility, and process flexibility. Machine flexibility refers to the various types of operations that a machine can perform without requiring the prohibitive effort of switching from one order to another. Routing flexibility is the capability of processing a given set of part types using more than one line (alternative line) in the plant. Process flexibility results from being able to build different types of final products at the same plant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1889-1896
• /
• 2011

There has been a lot of researches to develop techniques that provide redundant paths, there by making Multistage Interconnection Networks(MINs) fault tolerant. So far, the redundant paths in MINs have been realized by adding additional hardware such as extra stages or duplicated data links. This paper presents a new MIN topology called Hierarchical MIN. The proposed MIN is constructed with 2.5N-4 switching elements, which are much fewer than that of the classical MINs. Even though there are fewer hardware than the classical MINs, the HMIN possesses the property of full access and also provides alternative paths for the fault tolerant. Furthermore, since there is the short cut in HMIN for the localized communication, it takes advantage of exploiting the locality of reference in multiprocessor systems. Its performance under varying degrees of localized communication is analysed and simulated.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.5
• /
• pp.1728-1743
• /
• 2021

Three-dimensional (3D) video scenes are complex and difficult to control, especially when scene switching occurs. In this paper, we propose two algorithms based on an incremental proportional-integral-derivative (PID) algorithm and a similarity analysis between views to improve the method of bit allocation for multi-view high efficiency video coding (MV-HEVC). Firstly, an incremental PID algorithm is introduced to control the buffer "liquid level" to reduce the negative impact on the target bit allocation of the view layer and frame layer owing to the fluctuation of the buffer "liquid level". Then, using the image similarity between views is used to establish, a bit allocation calculation model for the multi-view video main viewpoint and non-main viewpoint is established. Then, a bit allocation calculation method based on hierarchical B frames is proposed. Experimental simulation results verify that the algorithm ensures a smooth transition of image quality while increasing the coding efficiency, and the PSNR increases by 0.03 to 0.82dB while not significantly increasing the calculation complexity.