• Journal of the Speleological Society of Korea
• /
• no.88
• /
• pp.45-50
• /
• 2008

It is rapidly increasing number using Hi-pass system passing through tollgate on the high way. However disabled people and man of merit have been excepted existing advantage of discount when they are using Hi-Pass. It is difficult to make a check an advantage when they are in a vehicle for using Hi-pass system technology in present. For solving this problem, we have fabricated virtual Hi-pass system combined fingerprint identification system (FIS) by AVR and fingerprint identification USB. We checked the chance of efficiency and utility in this system for getting a solution of conservative problem. And, it will be also used for entrance ticketing and transferring of cave tourism and so on.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.4
• /
• pp.90-101
• /
• 2010

The existing HiPassPlusCard system is composed of the HiPassPlusCard, a Purchase SAM, a Purchase terminal, a settlement system and OBU. However, this system is confronted by the problem with its incompatibility. This problem occurred because the technology companies made cards in their own ways in respect of the parts which were not yet set by KS standard. Thus if existing HiPassPlusCard user wants to use any other public transportations, user would have to buy other cards and have to bring all them. Also if the HiPlusCard wants to extend their business to apply its technology into infrastructure of the other companies, the HiPlusCard has to construct infra independently so that it causes the such problems of duplicated investment. To solve these problems, we have analyzed and upgraded the existing HiPassPlusCard system, and we designed and developed the Nation-wide Interoperable HiPassPlusCard system. Then the conformity test demonstrated that it is efficiency-oriented and technically performs well. Also we, the HiPlusCard, the Korea Financial Telecommunications & Clearings and the KORAIL NETWORKS, run the Test-bed in Gwangju for 6 months. The test-bed indicated that Nation-wide Interoperable HiPassCard system practically works well.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.1
• /
• pp.52-65
• /
• 2016

The electronic toll collection system(ETCS), is globally used in about 40 countries. In Korea, the Korea Expressway Corporation led the nationwide introduction of the ETC system in 2007 under the brand name of the Hi-pass. Since then, Hi-pass, with its rate of average daily use reaching about 70%, has become an essential facility in Korean expressways. To identify users' perception on Hi-pass (satisfaction, preference, etc.), this study conducted a Modified Importance-Performance Analysis (M-IPA). With this, this study attempted to identify the kind of efforts necessary to enhance current Hi-pass users' convenience and satisfaction. According to the result of M-IPA, the items including "non-stop payment" and "toll discount" are identified as key items that require further improvement. For improvement in the "non-stop payment" item, operations of Hi-pass toll booths appropriate for the demand for Hi-pass use and the selection of Hi-pass booths' locations in consideration of entry and exit lanes need to be improved. In addition, with regard to the "toll discount" item, although toll discount is currently provided to Hi-pass users, thus, PR thereof will have to be strengthened. It is expected that this study will be used as basic data to devise methods of enhancing Hi-pass usage through improvement of Hi-pass users' satisfaction.

• 한국ITS학회:학술대회논문집
• /
• 2002.11a
• /
• pp.100-103
• /
• 2002

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.6
• /
• pp.562-569
• /
• 2009

Recently, Hi-pass system(non-stop electric toll collection) using DSRC is working. However, it has various problems such as system errors by EM wave interference or multi-path reflection. The EM wave absorber is able to solve these problems. In this paper, we designed and fabricated EM wave absorber using amorphous substance. As a result EM wave absorber with composition of amorphous metal powder:CPE=45:55 wt.% has the thickness of 2.65 mm and absorption ability was higher than 40 dB at 5.8 GHz.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.3
• /
• pp.59-66
• /
• 2010

Around a toll plaza, vehicles do such maneuvers as slow down, stop, and speed up to pay their tolls when they use ordinary toll gates. They can be expected more fuel consumptions compared to the vehicles which use the Hi-pass, a Korean type of Electronic Toll Collection System(ETCS). To measure the exact amount of difference between the two gas consumptions, we equipped a test vehicle with a measurement system and constructed a model toll gate on our test field. Through the field tests on fuel consumptions, we could confirm a 36.7 % of energy saving when the test car used the Hi-pass. Then we projected the result on the total traffic volumes which had used national expressway network for five months from January 2009. Projected to the whole traffic, potential cost savings reached 5.34 billion won. We expect this result be frequently mentioned of to prove the fuel efficiency of the Hi-pass system.

• Journal of Korean Society for Quality Management
• /
• v.47 no.2
• /
• pp.367-380
• /
• 2019

Purpose: The purpose of this study is (1) to empirically examine why laggards resist IT adoption in public service and (2) to investigate the relationship between resistance and negative behavioral intention. Methods: The questionnaire survey was conducted on expressway users who do not use High-pass system. The collected 232 samples were analyzed using structure equation model method with AMOS 22.0. Results: Resistance is found to be a statistically significant factor affecting intention to reject. Also, incompatibility, privacy concern, status quo inertia and relative advantage are found to be statistically significant factors affecting resistance. Conclusion: Laggards have a tendency to intend to reject IT adoption rather than to postpone. They are affected not by monetary, procedural aspect associated with purchasing or registering OBU(On Board Unit). Incompatibility and relative advantage which are inherent attributes of Hi-pass system are more influential factors than privacy concern and status quo inertia. They make ethical and emotional decision partially affected by public-social factors.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.4
• /
• pp.30-37
• /
• 2014

The Electronic Toll Collection System based on Free-Flow Multi-Lane is needed to solve some yearly problems such as traffic congestion, safety accident, maintenance by hold-up of one way hi-pass system. The hi-pass communication system is first-in, first-out method in one way environment so, it can't handle various running patterns such as vehicle platoon, switching lane and passing in multi-lane environment. In this thesis we compared and analyzed the communication system of foreign countries ETCS operating system and domestic hi-pass communication system, then studied communication system which can run in multiple-way accepting existing hi-pass OBU. And we formed the communication system of Free-Flow Multi-Lane environment as a plan using incoherent of IR antenna and coherent of RF antenna. The communication system in Free-Flow Multi-Lane environment can be used not alone in parking garages but in expressways of ETCS and toll roads from now on.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1505-1510
• /
• 2014

High-Pass (ETC ; Electronic Toll Collection) system is one of the basic elements, which adopts a wireless communication method using 5.8 GHz and can realize a part of ITS (Intelligent Traffic System). On the other hand, communication errors occur frequently in Hi-Pass system due to signal erros, multi-path reflection, and/or system-to-system interferences. To solve these problems, an EM (Electro-Magnetic) wave absorber can be used. To solve these Problems, we fabricated some samples in the different composition ratios of Carbon, Sendust, and CPE, and it was confirmed that the optimum composition ratio of Carbon : Sendust : CPE is 10 : 40 : 50 wt.%. The complex relative permittivity and complex relative permeability were derived by using the measured data. In addition, the optimum design parameters for the absorber were determined by simulation. Then the absorption abilities were calculated by changing the thickness of the EM wave absorbers. As a result, the optimum thickness of the developed EM wave absorber was 2.85 mm with absorption ability over 22.4 dB at 5.8 GHz. Futhermore, the EM wave absorber was fabricated based on the simulated and designed values. The measured values agreed well with the simulated ones. Therefore, it was clearly shown that the developed EM wave absorber in this paper is to be applied in actual situations.

• Journal of Navigation and Port Research
• /
• v.35 no.9
• /
• pp.717-720
• /
• 2011

In this paper, we designed and fabricated the Electromagnetic(EM) wave absorber for an Electronic Toll Collection(ETC or Hi-pass) system by using Amorphous metal powder and CPE. The material properties and the absorption properties of the samples containing 50 wt.%, 60 wt.%, 70 wt.%, and 80 wt.% of Amorphous. Moreover, the EM wave absorption abilities were simulated for the different thicknesses of the EM absorbers by adopting the measured permittivity and permeability, and then the EM wave absorber was fabricated based on the simulated design values. As a result, the EM wave absorber with the composition of Amorphous metal powder : CPE = 50 : 50 wt.% with the thickness of 2.6 mm has excellent absorption ability more than 40 dB at 5.8 GHz.