Han, Sangmoon;Choi, Ilgyu;Song, Jihoon;Lee, Cheul-Ro;Cho, Il-Wook;Ryu, Mee-Yi;Kim, Jin Soo
Applied Science and Convergence Technology
/
제27권5호
/
pp.95-99
/
2018
We discuss the structural and optical characteristics of GaN nanowires (NWs) grown on Si(111) substrates by a plasma-assisted molecular-beam epitaxy. The GaN NWs with high crystal quality were formed by adopting a new growth approach, so called Ga pre-deposition (GaPD) method. In the GaPD, only Ga was supplied without nitrogen flux on a SiN/Si surface, resulting in the formation of Ga droplets. The Ga droplets were used as initial nucleation sites for the growth of GaN NWs. The GaN NWs with the average heights of 60.10 to 214.62 nm obtained by increasing growth time. The hexagonal-shaped top surfaces and facets were observed from the field-emission electron microscope images of GaN NWs, indicating that the NWs have the wurtzite (WZ) crystal structure. Strong peaks of GaN (0002) corresponding to WZ structures were also observed from double crystal x-ray diffraction rocking curves of the NW samples. At room temperature, free-exciton emissions were observed from GaN NWs with narrow linewidth broadenings, indicating to the formation of high-quality NWs.
Sung-Min Kim;Woon Young Lee;Sekown Oh;Sang-Yul Lee
한국표면공학회지
/
제56권6호
/
pp.401-411
/
2023
This study investigates the synthesis, characterization, and application of zinc oxide (ZnO) nanoparticles for corrosion resistance and stress corrosion cracking (SCC) mitigation in high-temperature and high-pressure environments. The ZnO nanoparticles are synthesized using plasma discharge in water, resulting in rod-shaped particles with a hexagonal crystal structure. The ZnO nanoparticles are applied to Alloy 600 tubes in simulated nuclear power plant atmospheres to evaluate their effectiveness. X-ray diffraction and X-ray photoelectron spectroscopy analysis reveals the formation of thermodynamically stable ZnCr2O4and ZnFe2O4 spinel phases with a depth of approximately 35 nm on the surface after 240 hours of treatment. Stress corrosion cracking (SCC) mitigation experiments reveal that ZnO treatment enhances thermal and mechanical stability. The ZnO-treated specimens exhibit increased maximum temperature tolerance up to 310 ℃ and higher-pressure resistance up to 60 bar compared to non-treated ZnO samples. Measurements of crack length indicate reduced crack propagation in ZnO-treated specimens. The formation of thermodynamically stable Zn spinel structures on the surface of Alloy 600 and the subsequent improvements in surface properties contribute to the enhanced durability and performance of the material in challenging high-temperature and high-pressure environments. These findings have significant implications for the development of corrosion-resistant materials and the mitigation of stress corrosion cracking in various industries.
자율주행자동차의 센서에 대응하는 시설물의 검지성능을 향상시키는 것은 주행안전성을 향상시키는 데에 도움이 된다. 도로·교통 분야에서는 이를 위하여 도로 인프라 또는 시설물의 개선을 통해 센서에 대한 검지성능을 향상시키기 위한 연구를 수행하고 있다. 본 연구는 이러한 자율주행 지원 인프라 개발 연구의 일환으로 강우 상황에서도 충분히 LiDAR의 검지성능이 확보되어 공사구간에서 시선유도 기능을 유지할 수 있도록 교통콘과 드럼의 형상을 변형하여 이의 개선효과를 실증 실험으로 확인하였다. 개선의 원리는 반사 성능이 증대되며 기존의 시설물과 형상적으로 크게 차이가 나지 않도록 교통콘은 원뿔형 대신 사각뿔형으로, 드럼은 원기둥형 대신 6각기둥형과 8각기둥형으로 각각 제작하였다. 맑은 날과 강우 20 mm/h, 40 mm/h 상황에서 시설물에 대한 LiDAR 검지 데이터를 확인하였으며, 사각뿔형 교통콘과 8각기둥형 드럼은 기존 시설물에 비해 검지성능이 향상되었음을 확인하였다. 다만, 반복 측정에 따른 편차가 발생하였고, 통계적 해석으로는 유의미성을 확인하지 못한 것이 본 연구 결과의 한계이며, 이 결과를 반영하여 향후 연구에서는 측정환경의 다양성에도 균일하게 데이터가 취득될 수 있는 형태로 개선할 필요가 있다.
수열합성법으로 실리콘 (111) 기판 위에 산화아연 나노막대를 성장하였다. 산화아연 나노막대를 성장하기 전, 실리콘 기판에 스핀코팅법으로 씨앗층을 성장하였다. 산화아연 나노막대는 오토클레이브(autoclave)로 $140^{\circ}C$에서 6시간 동안 성장하였고, 아르곤 분위기에서 300, 500, $700^{\circ}C$의 온도로 20분 동안 열처리하였다. X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), photoluminescence (PL)를 이용하여 열처리한 산화아연 나노막대의 구조적, 광학적 특성을 분석하였다. 모든 산화아연 나노막대 시료에서 c-축 배향성을 나타내는 강한 ZnO (002) 회절 피크와 약한 ZnO (004) 회절 피크가 나타났다. 열처리 온도가 증가함에 따라 산화아연 나노로드의 residual stress는 compressive에서 tensile로 변하였다. Hexagonal 형태의 산화아연 나노로드를 관찰하였다. 산화아연 나노로드의 PL 스펙트럼은 free-exciton recombination에 의해 3.2 eV에서 좁은 near-band-edge emission (NBE) 피크와 산화아연 나노막대의 결함에 의해 2.12~1.96 eV에서 넓은 deep-level emission (DLE) 피크가 나타났다. 산화아연 나노막대를 열처리함에 따라, NBE 피크의 세기는 감소하였고 DLE 피크는 열처리에 의해 발생한 산소 관련 결함에 의하여 적색편이 하였다.
단결정 사파이어 (0001) 기판 위에 저가의 초산아연(Zinc Acetate Dehydrate; ZAH) 전구체를 이용하여 초음파 열분해법과 Ar 가스를 이용한 ZnO 박막을 성장시켰다. Thermogravimetry-Differential Scanning Calorimetry(TG-DSC) 초산아연의 열분해 과정을 조사하여 $380^{\circ}C$ 이상에서 ZnO로 분해되는 것을 확인하였다. $380-700^{\circ}C$에서 증착된 ZnO 박막은 모두 ZnO (002), (101) 결정면으로 부터의 회절피크를 보여주고 있었으며, $400^{\circ}C$ 박막의 경우 c-압축 스트레인 ${\Sigma}Z=0.2\%$, 압축 응력 $\sigma=-0.907\;GPa$이 작용하고 있음을 알 수 있었다. 전자 현미경을 이용한 미세 구조의 관찰을 통하여 $380-600^{\circ}C$에서는 초산아연과 ZnO 초미세 입자가 혼합된 aggregate 형태의 결정립을 형성하고 있었으며, nanoblade 형태의 미세구조를 보였다. 한편 $700^{\circ}C$에서 증착된 박막내의 결정립은 찌그러진 육방정계의 형태를 취하고 있으며, 10-25nm 정도의 부결정림 초미세 ZnO 입자로 이루어져 있음을 알 수 있었다. 초미세 입자의 형성을 임의 핵형성 기구(random nucleation mechanism)로 설명하였고, photoluminescence(PL) 측정을 통하여 광 특성을 조사하였다.
Microstructure and morphology of precipitates in $Ni_3Al$- and TiAl-based intermetallics containing carbon have been investigated in terms of transmission electron microscopy(TEM). In an $L1_2$-ordered $Ni_3Al$ alloy with 4 mol.% of chromium and 0.2~3.0 mol.% of carbon, fine octahedral precipitates of $M_{23}C_6$ type carbide were formed in the matrix by aging at temperatures around 973 K after solution annealing at 1423 K. TEM examination revealed that the $M_{23}C_6$ phase and the matrix lattices have a cube-cube orientation relationship and keep partial atomic matching at the {111} interface. After prolonged aging or by aging at higher temperatures, the $M_{23}C_6$ precipitates then adopt a rod-like morphology elongated parallel to the <100> directions. In the $L1_0$-ordered TiAl containing 0.1~2.0 mol.% carbon, TEM observations revealed that needle-like precipitates, which lie only in one direction parallel to the [001] axis of the $L1_0$ matrix, appear in the matrix and preferentially at dislocations. Selected area electron diffraction(SAED) patterns analyses have shown that the needle-shaped precipitate is $Ti_3AlC$ of perovskite type. The orientation relationship between the $Ti_3AlC$ and the $L1_0$ matrix is found to be $(001)_{Ti3AlC}//(001)_{L10\;matrix}$ and $[010]_{Ti3AlC}//[010]_{L10\;matrix}$. By aging at higher temperatures or for longer period at 1073 K, plate-like precipitates of $Ti_2AlC$ with a hexagonal structure are formed on the {111} planes of the $L1_0$ matrix. The orientation relationship between the $Ti_2AlC$ and the $L1_0$ matrix is $(0001)_{Ti2AlC}//(111)_{L10\;matrix}$ and $_{Ti2AlC}//_{L10\;matrix}$.
Si 기판 위에 $\alpha$-Fe$_2$O$_3$을 하지층으로 하는 Ba-ferrite 박막을 pulsed laser deposition system으로 제조하여 결정학적 및 자기적 성질을 X선 회절, SEM, Mossbauer 분광법 및 VSM을 사용하여 연구하였다. $\alpha$-Fe$_2$O$_3$박막은 Si 기판위에 PLD를 이용하여 기판온도 400 $^{\circ}C$, 산소압력 0.1 Torr로 5분간 증착 하였고 그 위에 두께를 달리하여 Ba-ferrite 박막을 제조하였다. Ba-ferrite 결정은 가늘고 긴 모양의 결정립들로 형성되었으며 두께에 따라 그 모양과 상태가 변화하였다. Mossbauer 분광법으로부터 Ba-ferrite 결정내의 Fe 원자의 스핀 방향은 두께가 얇을수록 하지층의 영향으로 기판에 수직으로 정렬하려는 경향을 보이고 있음을 확인하였다. 자기이력곡선의 각형비 역시 두께가 얇을수록 더 크며 이러한 특성은 수평에 비하여 수직의 경우가 더 강하게 나타났다. 보자력 역시 같은 경향을 보이나 포화자화의 값은 수평의 경우에 더 큰 값을 나타내었다. 결정구조는 Magnetoplumbite로서 두께가 작아질수록 결정상수 $\alpha$는 감소하고 c는 증가하는 경향을 보였다.
살오징어 (Todarodes pacif icus)와 서해낙지 (Octopus minor)의 망막은 외절부, 간상기저부, 내절부 그리고 망상층 등 4개의 층으로 구분되었고, 망막의 두께는 오징어 ($385{\sim}400{\mu}m$)에서보다 낙지 ($400{\sim}420{\mu}m$)에서 $20{\mu}m$ 정도 더 두터웠다. 망막은 시각세포와 지지세포로 구성되어 있는데, 서해낙지의 지지세포 상단에는 미세융모 (길이 $0.6{\sim}0.7{\mu}m$)가 밀생된데 비해 살오징어에서는 확인되지 않았다. 망막을 구성하는 시각세포와 지지세포들은 광선을 차단하는 색소과립들을 소지하고 있었는데, 살오징어인 경우 시각세포의 색소과립(크기, $2.0{\times}0.5{\mu}m$ 정도)이 지지세포의 색소과립 (크기, $1.0{\times}0.3{\mu}m$ 정도)에 비해 컸으나, 서해낙지에서는 두 세포간 색소과립의 크기 ($0.8{\times}0.6{\mu}m$ 정도)가 비슷하였다. 시각세포의 세포질 상단부에서 빗살모양의 미세융모들이 정육각형 구조 (직경, 60 nm)인 rhabdome을 형성하였는데 한 개의 rhabdome은 4개의 rhabdomere로 구성되어 있으며, 전체 rhabdome의 총 단면적은 서해낙지가 살오징어에 비해 두 배정도 컸다. 망상층을 구성하는 연접체는 살오징어인 경우 전자밀도가 높은 핵을 포함하는 소포 (electron dense-core vesicle)와 전자밀도가 낮은 소포 (electron lucent vesicle)들로만 형성된 연접체 등 두 종류를 소지한 반면, 서해낙지에서는 전자밀도가 높은 소포(electron dense vesicle)와 전자밀도가 낮은 소포들이 혼합된 형과 전자밀도가 낮은 소포들로만 이루어진 연접체 등 두 종류를 소지하고 있어 두 종간 차이가 확인되었다.
본 연구에서는 HVPE을 이용하여 sapphire(001) 기판 위에 직경 2 inch, 두께 약 1.5 mm인 bulk GaN를 성장하고, 이를 mechanical polishing을 통해 $10{\times}10,\;15{\times}15$ mm 크기의 free-standing GaN template을 제작하여 그 특성을 평가하였다. 성장된 GaN 단결정의 X-ray diffraction pattern 결과 (002) 및 (004) 면으로부터의 회절에 의한 peak가 나타났으며, (002) 면의 DCXRD(Double crystal X-Ray diffraction) rocking curve peak의 반치폭(FWHM)은 98 arcsec으로 나타났다. 제작한 GaN template는 363 nm 파장에서 sharp한 PL spectrum을 나타내었으며, 불순물 defect에 의한 yellow 영역에서의 broad peak은 관찰되지 않았으며, 제작된 GaN template표면의 etch-pit 밀도는 $5{\times}10^6/cm^2$으로 매우 낮았다. 이러한 분석결과를 통하여 성장된 GaN template는 LED 및 LD 등의 청색 발광소자 및 고온, 고출력 소자용 기판재료로 응용이 가능할 것으로 생각 된다.
분무열분해 공정을 이용하여 규칙적인 메조기공을 가지는 실리카 분말을 제조하고 고표면적을 얻기 위한 합성조건을 최적화하였다. 주형제로 이용된 CTAB의 양과 액적들의 반응기 내에서 체류시간을 변화시켜주면서 입자를 제조하고 SEM, BET, SAXS, 그리고 DLS를 통해 분말특성을 조사하였다. 기체 유입속도를 고정하고 CTAB/TEOS 몰비를 0.05에서 0.30으로 변화시킴에 따라 비표면적은 200에서 $1,290m^2/g$으로 변화였다. CTAB/TEOS 몰비를 고정했을 때 입자의 비표면적은 기체의 유입속도에 따라 1,062에서 $1,305m^2/g$ 사이에서 변화되었다. 제조된 입자들의 BJH 탈착에 의한 평균 기공 크기는 $21{\sim}23{\AA}$를 가졌으며, CTAB/TEOS 몰비나 기체 유입속도에 크게 영향을 받지 않았다. 최대 표면적은 CTAB/TEOS 비를 0.2, 기체 유속을 20 l/min으로 했을 때 $1,305m^2/g$를 얻었다. 제조된 실리카 분말은 육방형구조의 규칙적인 기공에 기인한 $2{\theta}=2.6^{\circ}$ 강한 피크와 $2{\theta}=4.4$ 및 $5.1^{\circ}$ 약한 피크를 가지는 것을 SAXS 분석결과로 확인하였다. 제조된 실리카 분말은 구형의 형상을 가졌으며 $1.0{\mu}m$의 평균크기를 가졌다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.