• Journal of Hydrogen and New Energy
• /
• v.21 no.5
• /
• pp.412-418
• /
• 2010

Steam reforming of n-hexadecane, a major component of diesel over Ni-based hydrotalcite-like catalyst was carried out at $900^{\circ}C$ at atmospheric pressure with space velocity of $10,000h^{-1}$ and feed molar ratio of steam/carbon=3.0. Ni-based hydrotalcite catalyst was prepared by a solid phase crystallization (spc) method and characterized by $N_2$-physisorption, CO chemisorption, TPR., XRD, and TEM techniques. It was found that spc Ni/MgAl catalyst showed higher catalytic stability and inhibition of carbon formation than Ni/$\gamma-Al_2O_3$ catalyst under the tested conditions. The results suggest that the modified spc-Ni/MgAl catalyst after optimization may be applied for the SR reaction of diesel.

• Clean Technology
• /
• v.6 no.1
• /
• pp.51-60
• /
• 2000

The soil remediation by non-ionic surfactant solutions ($C_{12}H_{25}O(CH_2CH_2O)_5H$ and Triton X-100) was studied. Depending on the amounts and use of co-surfactants, MPT(phase inversion temperature), dynamic interfacial tension, and the detergency efficiency of the surfactant solutions in soil were investigated. The oils used were kerosene, n-hexadecane, and paraffin oil. With respect to a higher detergency efficiency, a lower interfacial tension and the MPT was very important. The $C_{12}H_{25}O(CH_2CH_2O)_5H$ was better than Triton X-100 on the oil removal from the soil and the effect of oil kinds was kerosene>paraffin $oil{\geq}n-hexadecane$. The co-surfactant, n-dodecanol, reduced the MPT compared to no addition of this, whereas it did not enhance the detergent efficiency.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2002.05b
• /
• pp.452-454
• /
• 2002

A biosurfactant-producing microorganism, .Pseudomouos sp. EL-G527 was isolated from activated sludge by enrichment culture when grown on mineral salt medium containing n-hexadecane as a carbon source. The biosurfactant from .Pseudomonar sp. EL-G527 exhibited lesser toxicity to bacterial population than synthetic surfactants and in the biodegradation test, biosurfactant was rapidly degraded and lost its activity as surface active material after 1 day incubation. In this study, the biosurfactant from Pseudomonas sp. EL-G527 was effective surface-active compound, more biodegradable and less toxic to microbial ecosystem than various synthetic surfactants.

• Journal of Microbiology and Biotechnology
• /
• v.5 no.4
• /
• pp.241-243
• /
• 1995

A lipopolysaccharide (LPS) defective mutant of Bradyrhizobium japonicum was characterized in terms of its cell surface hydrophobicity (CSH). By monitoring the kinetics of adhesion to hexadecane the LPS mutant was found to be far more hydrophobic than the wild type strain; the removal coefficients were 4.65 $min^{-1}$ for the mutant, as compared with only 2.40 $min^{-1}$ for the wild type. The possible role of cell surface hydrophobicity of B. japonicum in nodulation process is discussed.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.144-144
• /
• 2013

• Microbiology and Biotechnology Letters
• /
• v.28 no.5
• /
• pp.303-308
• /
• 2000

The character-istics of the volatile flavor components of traditional Korean Nuruk produced by Aspergillus oryze NR 3-6 and Penicillium expansum NR 7-7 were investigated. Volatile flavor of Nuruk was identified twenty-one components by gas chromatography-mass spectronmeter. Major flavor components were alkanes such as tridecan, tetradecan, penta-decane, hexadecane, heptadecane, octadecan, undecane, and dodecane.

• Korean Chemical Engineering Research
• /
• v.50 no.4
• /
• pp.733-737
• /
• 2012

This study reports the microfluidic preparation of monodisperse multiple emulsions using hydrodynamic control. To generate multiple emulsions, we fabricate a microfluidic capillary device based on co-flowing stream without any surface modification of microchannels. Based on the system, we can successfully generate multiple emulsions (W/O/W) using water containing 0.5 wt% Tween 20, n-hexadecane with 5 wt% Span 80, and 10 wt% poly (vinyl alcohol) (PVA) aqueous solution, respectively. Furthermore, we control the number of inner droplets by modulation of flow rate of inner fluid at fixed flow rate of middle and outer fluid. The multiple emulsions having precisely controlled inner droplets' size and number can be applicable for multiple chemical reactions as an isolated microreactor.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.10
• /
• pp.887-894
• /
• 2016

The thermal control device using solid-liquid phase change material (PCM) is designed, manufactured, and experimented in thermal environment chamber. The n-Hexadecane is selected as a PCM and its melting point is placed within the component working temperature range. The PCM container is made of Al6061 and has the thermal spreading fins inside. To simulate the working condition for on-orbit satellite the heat pipes are used to connect the heater and radiator and the PCM thermal control device (PCMTD) is installed at the middle portion of heat pipes. The thermal buffer mass (TBM), which is same configuration and volume with PCMTD, is also manufactured to compare the thermal control performance. As a result, the PCMTD is not only more efficient than TBM in their temperature control features but both mass and power of compensation heater are reduced.

• Korean Journal of Microbiology
• /
• v.28 no.1
• /
• pp.71-75
• /
• 1990

The isolates biodigrading crude oil were examined to characterize thier properties. Isolates which were identified as Acinetobacter lwoffii G1, Klebsiella pneumoniae L25, Pseudomonas maltophilia N246, Xanthomonas campestris M12, and Xanthomonas sp. M28. The optimum concentration of crude oil was 0.15% for the bacterial growth. X. campestris M12, Xanthomonas sp. M28, and K. penumoniae L25 showed the maximal growth at the concentration of 3.5% sodium chloride, indicating that they were derived from sea water. Among the isolates, X. campestris M12, Xanthomonas sp. M28 specially utilized hexadecane and octane, and P. maltophilia N246 utilized octane with optimum concentration of 0.2-0.3% as sole carbon source. The utilization of components of saturate fraction by K. pneumoniae L25 was examined by gas-liquid chromatography. The short-chain saturates are used before the long chain ones although they almost disappear within 8 days of incubation at $30^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.5 no.2
• /
• pp.274-284
• /
• 1994

Phase Inversion Temperature (PIT) measurements showed that the addition of polar components such as oleyl alcohol and oleic acid to the system comprising n-dodecylpentaoxyethylene monoether ($C_{12}E_5$), nonpolar oil (n-hexadecane) and water produced large reductions in the PIT. The PIT was lowered as the additive-to-surfactant ratio in the surfactant films in the microemulsion phase was increased. Another dramatic effect of additive was the manner in which it affects the volume of the microemulsion phase at the PIT of the oil and water solubilization characteristics. Microemulsion phase volume was increased rapidly with decreasing PIT, i.e., with increasing amounts of additive in the system. Also with a decrease in PIT, the solubilization parameters of both oil and water in the microemulsion phase were strikingly increased. Even though soil removal data were not available for the conditions where our results obtained, PIT measurement seems a useful starting point for estimating conditions when middle-phase microemulsion formation and its associated high solubilization of oil can be expected.