• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.292-297
• /
• 2003

A stochastic approach has been presented for superplastic deformation of Ti-6AJ-4V alloy, and probability function are used to heterogeneous phase distributions. The experimentally observed spatial correlation function are developed, and microstructural evolutions together with superplastic deformation behavior have investigated by means of the probability function. The result have shown that the probability varies approximately linearly with separation with distance, and significant deformation enhanced probability changes during the deformation. The stress-strain behavior with the evolutions of probability function can be correctly predicted by the model. The finite clement implementation using Monte Carlo simulation associated with phase re-distributions shows that better agreement with experimental data of failure strain on the test specimen.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1996년도 춘계학술발표회논문집(2)
• /
• pp.241-246
• /
• 1996

An analytical model to calculate rate of vapor generation due to heterogeneous wall nucleation in flashing flow is developed. In the present model, an important parameter of the vapor generation term, i.e. nucleation site density is calculated by integrating its probability distribution function with respect to active cavity radius. The limits of integration are minimum and maximum active cavity radii, and these are formulated using an active cavity model for nucleate boiling. This formulation, therefore. can statistically account for the effect of surface specific thermo-physical and geometric conditions on the vapor generation rate and flashing inception. For verifying the adequacy of the present model, steady state two-fluid and the bubble transport equations are solved with applicable constitutive equations. The applicable region of the bubble transport equation is also extended to churn-turbulent flow regime to predict interfacial area concentration at high void fraction. Predicted results in terms of axial pressure and void fraction profiles along the channels are compared with experimental data of Super Moby Dick and BNL Reasonable agreements have been achieved and this shows the applicability of the present model to flashing flow analysis.

• 한국전자거래학회지
• /
• 제8권4호
• /
• pp.151-166
• /
• 2003

상품분류체계 중 가장 많이 사용하는 UNSPSC와 HS를 선정하여 각 상품분류체계의 구성 및 구조와 그 특징을 파악하고 분류명에 대한 온톨로지를 분석하였다. 상품분류체계의 번호체계 및 각 자릿수에 대한 이해를 충분히 하고 UML을 이용하여 모델링을 하였다. 상품분류체계 중 대상 범위에 대한 토픽맵을 개발한 뒤 그래프로 표현하고 최종적으로 개별 상품분류체계에 대한 토픽맵을 통합하여 상품분류체계의 온톨로지를 통합함으로써 계층 및 구조가상이한 상품분류체계 간의 정보교환을 용이하게 할 수 있게 하였다.

• 한국정보처리학회논문지
• /
• 제6권10호
• /
• pp.2670-2679
• /
• 1999

XML documents which are used for exchanging structured documents between heterogeneous distributed system are increasing recently. It needs an object-oriented visualization tool for XML documents. So, we propose rules and an algorithm to represent structure of XML documents using UML Class Diagram. It helps to generate XML documents which are included links by understanding easily constructs of them and reduce gap of schema for them between heterogeneous databases. We propose formal models and modeling functions of XML links which provide an efficient environment for processing object-oriented documents.

• 대한기계학회논문집A
• /
• 제20권4호
• /
• pp.1356-1362
• /
• 1996

Fracture toughness of heterogeneous brittle materials such as poly crystalline ceramics used to present the size (thickness) effect as well as statistically distributed results. There is belief that both(size effect and scatter) must be associated with each other. However, no generally accepted theory has been established so far. Using statistical approach, a probabilistic modeling for the fracture toughness which describes the thickness effect was attempted in this paper, Weibull distribution of specific fracture energy(SFE)at local areas and Griffith criterion are applied to the model. In addition, the newly developed model was verified with experimental results of alumina.

• 한국군사과학기술학회지
• /
• 제17권6호
• /
• pp.773-785
• /
• 2014

For decades, modeling of pilots has been intensively studied due to its advantages in reducing costs for training and enhancing safety of pilots. In particular, research for modeling of pilots' non-kinetic behaviors which refer to the decisions made by pilots is beneficial as the expertise of pilots can be inherent in the models. With the recent growth in the amount of combat logs accumulated, employing statistical learning methods for the modeling becomes possible. However, the combat logs consist of heterogeneous data that are not only continuous or discrete but also sequence independent or dependent, making it difficult to directly applying the learning methods without modifications. Therefore, in this paper, we present a kernel function named hybrid sequence kernel which addresses the problem by using multiple kernel learning methods. Based on the empirical experiments by using combat logs obtained from a simulator, the proposed kernel showed satisfactory results.

• 대한산업공학회지
• /
• 제37권2호
• /
• pp.153-162
• /
• 2011

The demands of complicated data communications have issued a new challenge to port logistics systems. Customers expect ports to handle their generated administrative data while a vessel is docked in a port. One port logistics system, known as the Vessel Clearance Process (VCP), manages large numbers of documents related to port of entry. In the VCP, information flows through many organizations such as the port authority, shipping agents, marine offices, immigration offices, and others. Therefore, for effective management of the Business Process (BP) of the VCP, a standardized method of BP modeling is essential, especially in heterogeneous system environments. In a port, according to port policy, terms and data are sued that are similar to but different from those of other logistics partners, which hinders standardized modeling of the BP. In order to avoid tedious and time-consuming document customization work, more convenient modeling of BP for VCP is essential. This paper proposes an ontology-based process similarity measurement to assist designer for process modeling in port domain, especially VCP. We expect that this methodology will use convenient and quick modeling of port business processes.

• 한국시뮬레이션학회논문지
• /
• 제18권2호
• /
• pp.1-8
• /
• 2009

이종의 분산환경에서 다양한 보안시스템에 대한 효율적인 보안 관리를 위해서 관리자는 보안 시스템들이 설치된 네트워크 환경에 대한 사전에 전문적인 보안 지식을 갖고 있어야하며, 개방형 네트워크 환경의 경우 새로운 보안시스템이 추가되면 새로운 보안 정책과 기술을 적용해야 한다. 이는 전산망 운영 기관의 보안 관리 비용을 가중시키며 체계적이고 일괄적인 보안 정책 및 기술 구현을 불가능하게 하여 오히려 보안 문제를 야기시키는 역기능을 초래할 수 있다. 그리고, 보안 제품의 개발과 공급이 다수의 공급자에 의해서 공급되므로 서로 상이한 특성을 갖는 보안 시스템들로 구성된 보안 관리 구조의 효율적인 운용과 유지에 상당한 어려움이 있다. 이에 본 논문에서는 이종의 보안시스템을 관리하는 통합보안시스템의 보안정책을 Z-Notation을 통해서 정의하고 통합관리에서 발생되는 정책 충돌 문제를 대표적인 보안시스템인 침입차단시스템(Firewall : 방화벽)을 대상으로 모델링하고 이를 해결하는 알고리즘을 제시하고자 한다.

• International Journal of Computer Science & Network Security
• /
• 제24권6호
• /
• pp.207-215
• /
• 2024

Cloud computing is now used by most companies, business centres and academic institutions to embrace new computer technology. Cloud Service Providers (CSPs) are limited to certain services, missing some of the assets requested by their customers, it means that different clouds need to interconnect to share resources and interoperate between them. The clouds may be interconnected in different characteristics and systems, and the network may be vulnerable to volatility or interference. While information technology and cloud computing are also advancing to accommodate the growing worldwide application, criminals use cyberspace to perform cybercrimes. Cloud services deployment is becoming highly prone to threats and intrusions. The unauthorised access or destruction of records yields significant catastrophic losses to organisations or agencies. Human intervention and Physical devices are not enough for protection and monitoring of cloud services; therefore, there is a need for more efficient design for cyber defence that is adaptable, flexible, robust and able to detect dangerous cybercrime such as a Denial of Service (DOS) and Distributed Denial of Service (DDOS) in heterogeneous cloud computing platforms and make essential real-time decisions for forensic investigation. This paper aims to develop a framework for digital forensic for the detection of cybercrime in a joined heterogeneous cloud setup. We developed a Digital Forensics model in this paper that can function in heterogeneous joint clouds. We used Unified Modeling Language (UML) specifically activity diagram in designing the proposed framework, then for deployment, we used an architectural modelling system in developing a framework. We developed an activity diagram that can accommodate the variability and complexities of the clouds when handling inter-cloud resources.

• Advances in concrete construction
• /
• 제5권3호
• /
• pp.221-240
• /
• 2017

The modeling of the mechanical behavior of quasi-brittle materials is still a challenge task, mainly in failure processes when fracture and plasticity phenomena become important actors in dissipative processes which occur in materials like concrete, as instance. Many homogenization-based approaches have been proposed to deal with heterogeneous materials in the last years. In this context, a computational homogenization modeling for concrete is presented in this work using the concept of Representative Volume Element (RVE). The material is considered as a three-phase material consisting of interface zone (ITZ), matrix and inclusions-each constituent modeled by an independent constitutive model. The Representative Volume Element (RVE) consists of inclusions idealized as circular shapes symmetrically and nonsymmetrically placed into the specimen. The interface zone is modeled by means of cohesive contact finite elements. The inclusion is modeled as linear elastic and matrix region is considered as elastoplastic material. A set of examples is presented in order to show the potentialities and limitations of the proposed modeling. The consideration of the fracture processes in the ITZ is fundamental to capture complex macroscopic characteristics of the material using simple constitutive models at mesoscopic level.