• Analytical Science and Technology
• /
• v.25 no.3
• /
• pp.197-206
• /
• 2012

Ambers are composed of polymer molecules which contain aromatic moieties such as benzene, naphthalene, phenanthrene and anthracene. They emit fluorescence when irradiated with ultraviolet light, which was used for confirming an amber. The fluorescence of amber, however, tends to decrease as the surface of amber is weathered with light, heat, oxygen for a long time. In this study, the reliability of confirming amber with its fluorescence by measuring the changes of fluorescence after artificial aging. Aging factors were UV light (${\lambda}$=340 nm), oxygen with heat (100%, $90^{\circ}C$) and heat ($90^{\circ}C$) and aging time was for 5, 15, 30 and 60 days, respectively. In the excitation and emission spectra of amber, the intensity decreased and the maximal wavelength was shifted to longer wavelength with artificial aging time. Especially, there was a drastic decrease in the intensity of spectra to 1.7% of initial value after 60 days aging under oxygen with heat. Only in Colombian amber there showed an increase of fluorescence intensity for a certain aging time, which could be explained by the production of aromatic ring in the presence of light and heat. Conclusively, the fluorescence can be lessened by the natural weathering with light, heat and oxygen and it is not accurate to recognize amber just with UV irradiation method.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.1
• /
• pp.236-259
• /
• 2010

The examination of sediment distribution in Seongryu Cave shows existence of rocks contrasting with Joseon Supergroup contrary to existing knowledge. Contrasting especially with the Taeback Group, Daegi Formation, Hwajeol Formation, and Dongjeom Formation has been observed. Unlike Taeback area where Dumugol Formation and Makgol Formation are observed on top of Dongjeom Formation, the rocks of this area are not clear in its separation between the two, so that it was named Geunnam Formation. Seongryu Cave has been developed in this Ordovician Geunnam Formation of the Joseon Supergroup. The cave, mostly horizontal, runs in the NE-SW direction, and contains three lakes. The main passage and branches are about 330 m and 540 m, respectively, making the total length of the cave about 870 m (show cave area = 270 m). Through underwater examination, about 85 m-long underwater passage was newly discovered. Various speleothem such as soda straw, stalactite, stalagmite, column, flowstone, rimston, cave shield, cave coral, curtain, bacon sheet, cave pearl, cave flower, helictite and calcite raft can be found in the cave. There are sections with constant flow of cavern water, but the majority of cavern water in the cave come from the ceiling. The most important discovery in this study is the presence of various speleothem in the submerged part of cave passages. Traces of corrosion and/or erosion can be observed in the speleothem in the submerge passage.

• Corrosion Science and Technology
• /
• v.17 no.2
• /
• pp.60-67
• /
• 2018

The compounds associated with corrosion, in metallic archaeological samples of carbon steel of insular origin were evaluated to establish their degree of deterioration and structural damage against air pollution. The iron phases present in samples of archaeological artifacts were detected by Raman spectroscopy and confocal Raman microcopy. These samples mainly exhibited ing mainly ${\beta}$-FeO(OH) type goethite oxyhydroxides and small amounts of akaganeite ${\alpha}$-FeO(OH) lepidocrocite ${\gamma}$-FeO(OH) due to dominant chloride in a marine environment and non-stoichiometric oxyhydroxides Fe (II + / III +) as indicators of early corrosion. Some parts showed the presence of magnetic maghemite indicating high corrosion. ${\gamma}$-FeO(OH) is a precursor of phases associated with advanced marine corrosion. By studying its decomposition by Raman spectroscopy, it was synthesized with the following sequence: ${\gamma}-FeO(OH){\rightarrow}{\alpha}-FeO(OH)+{\gamma}-FeO(OH)$, ${\rightarrow}{\gamma}-Fe_2O_3+Fe_3O_4$. Ferric compounds provided evidence for the effect of intensity of laser on them, constituting a very useful input for the characterization of oxidation of iron in this type of artifacts. Thus, destructive analysis techniques should be avoided in addition to the use of small amounts of specimen.

• 보존과학연구
• /
• s.26
• /
• pp.103-126
• /
• 2005

Coprostanol is a metabolic product of cholesterol, formed by microbial action in the mammalian gut. This chemical compound is the major sterol in human and has been routinely studied as a biomarker of sewage pollution in marine and lacustrinesediments. This has led to the search for coprostanol as a biomarker in archaeologicalsoils, in order to detect the presence of fecal material. In this study, five samples of archaeological soils excavated at Wanggung ri, Iksancity, were used to assess the possibility of using coprostanol as indicators of ancient human activity in archaeological areas. The sampled soils were analyzed MXRD,EDXRF for their physical and chemical properties. And coprostanol was analysed byGC/MSD, using SIM method to detect and quantify specific compound. The results showed the soils were composed of quartz and feldspars, inorganicelement such as $SiO_2$, $Al_2O_3$, $Fe_2O_3$ etc. Moreover, the result from the analysis wasindicated that the specific compound is coprostanol. The coprostanol was determined at $0.16~1.01\mug$/g in the range of concentrations. This finding indicate that clear promise exists for the exploitation of coprostanol as biomarker of ancient human activity inarchaeological survey. Therefore such studies can serve to increase the confidence we place on biomarker-based methodologies for assessing fecal pollution. The application of this methodology has proved a simple and effective way of searching for that pattern in successively more aged deposits either known or suspected to contain fecal material. And the more scientific analysis of the soils will be showed to utility of the area ancient dietary life style, ancient environment.

• The Journal of the Korea Contents Association
• /
• v.14 no.10
• /
• pp.472-485
• /
• 2014

This study focuses on the news making system of the prime time news of PSB in Korean society, where the presence of ethnic minorities is increasing rapidly. Although the World Wide Web has become one of the most attractive media over the last decade, Korean PSB, Korean Broadcasting System (KBS), still remains the most popular and influential medium. Therefore, the process of analyzing news making system of ethnic minorities in Korean society represented in Korean PSB as a social construction is meaningful in that it provides an important key to understand the cultural and political background and characteristics of society. For this purpose, the article tries to understand news making process when producing news related to ethnic minorities in the Korean society such as migrant workers, married migrant women and mixed-heritage children of multicultural families by interview with ten reporters in KBS. As a result, most KBS reporters had stereotypes towards multiculturalism and migrants and news reports relating to ethnic minorities are usually produced routinely, using a set of rules that have become part of KBS culture.

• Analytical Science and Technology
• /
• v.26 no.3
• /
• pp.190-198
• /
• 2013

Ambers have been used mostly as beads, jewelry and ornaments from ancient times and excavated as a buried artifact. When excavated, they are severely weathered to be cracked, exfoliated and disintegrated. Monitoring of changes in composition of amber according to weathering is very important for diagnosing the condition of amber and applying conservation materials and techniques. In this study, we tried to find the components of amber by analyzing amber with pyrolysis/GC/MS. The changes in the composition of pyrolzates after artificial ageing for 60 days under heat and oxygen were also observed. Abietic acid was detected as a main component of fresh amber and monoterpene, alkene, aromatic hydrocarbon were detected as major pyrolyzates. Changes with artificial ageing was estimated by comparing the peak area ratio of 23 components, and it was found that abietic acid abruptly decreased in the presence of heat and oxygen together, revealing that oxygen is a key factor to the deterioration of amber. It was also tried to understand the weathered surface of original amber gemstone based on the result of this ageing experiment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.53-64
• /
• 2024

The Yeongnam southeastern region, with Ulsan as its focal point, is planning large-scale floating offshore wind power projects. Additionally, due to the establishment of new nuclear power plants and the extension of existing ones, there is a demand for the expansion of the power grid. The government has announced plans to establish a new power grid for this region as part of the 10th power supply plan. However, there are anticipated challenges in the actual construction phase, primarily because of the presence of national parks and cultural heritage protection zones near Gyeongju. As a result, this study presents an alternative approach that minimizes the creation of new power lines by utilizing existing ones. Using the Power System Simulator for Engineers (PSS/E), an analysis of transient stability was conducted and demonstrated its feasibility.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.208-227
• /
• 2013

Twenty-seven bronze bowls excavated from the Goryo burial complex at Deobu-gol were examined for their microstructure and chemical composition to characterize the bronze technology practiced by commoners at the time. Results showed that the objects examined can be classified into four groups: 1) objects forged out of Cu-near 22%Sn alloys and then quenched; 2) objects cast from Cu-below 10% Sn alloys containing lead; 3) objects cast from Cu-10%~20% Sn alloys containing lead and then quenched; 4) objects forged out of Cu-10~20% Sn alloys containing lead and then quenched. This study revealed that the fabrication technique as determined by alloy compositions plays an important role in bronze technology. The use of lead was clearly associated with the selection of quenching temperatures, the character of inclusions and the color characteristics of bronze surfaces. It was found that the objects containing lead were quenched at temperatures of $520^{\circ}{\sim}586^{\circ}C$ while those without lead were quenched at the range of $586^{\circ}{\sim}799^{\circ}C$. The presence of selenium in impurity inclusions was detected only in alloys containing lead, suggesting that the raw materials, Cu and Sn, used in making the lead-free alloys for the first group were carefully selected from those smelted using ores without lead contamination. Furthermore, the addition of lead was found to have significant effects on the color characteristics of the surface of bronze alloys when they are subjected to corrosion during interment. In leaded alloys, corrosion turns the surface light green or dark green while in unleaded alloys, corrosion turns the surface dark brown or black. It was found that in fabrication, the wall thickness of the bronze bowls varies depending on the application of quenching; most of the quenched objects have walls 1mm thick or below while those without quenching have walls 1mm thick or above. Fabrication techniques in bronze making usually reflect social environments of a community. It is likely that in the late Goryo period, experiencing lack of skilled bronze workers, the increased demand for bronze was met in two ways; by the use of chief lead instead of expensive tin and by the use of casting suitable for mass production. The above results show that the Goryo bronze workers tried to overcome such a resource-limited environment through technological innovations as apparent in the use of varying fabrication techniques for different alloys. Recently, numerous bronze objects are excavated and available for investigation. This study shows that with the use of proper analytical techniques they can serve as a valuable source of information required for the characterization of the associated technology as well as the social environment leading to the establishment of such technology.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.38-55
• /
• 2021

Cherwon Castle is located in Pungcheonwon, Cherwon, in the center of the Korean Peninsula. Currently, it is split across the Demilitarized Zone (DMZ) between the two Koreas. It attracts attention as a symbol of inter-Korean reconciliation and as cultural heritage that serves as data in making important policy decisions on the DMZ. Despite its importance, however, there has not been sufficient investigation and research done on Cherwon Castle. This is due to the difficulty involved in investigation and research and is caused by the site's inaccessibility. As a solution, the current investigative methods in satellite and aerial archeology can be applied to interpret and analyze the structure of Cherwon Castle and the features of its inner space zoning. Cherwon Castle was built on the five flat hills that begin in the northern mountainous hills and stretch to the southwest. The inner and outer walls were built mainly on the hilly ridges, and the palace wall was built surrounding a flat site that was created on the middle hill. For each wall, the sites of the old gates, which were erected in various directions , have been identified. They seem to have been built to fit the direction of buildings in the castle and the features of the terrain. The castle was built in a diamond shape. The old sites of the palace and related buildings and landforms related to water drainage were identified. It was verified that the roads and the gates were built to run from east to west in the palace. In the spaces of the palace and the inner castle, flat sites were created to fit different landforms, and building sites were arranged there. Moreover, the contour of a reservoir that is believed to be the old site of a pond has been found; it lies on the vertical extension of the center line that connects the palace and the inner castle. Between the inner castle and the outer castle, few vestiges of old buildings were found, although many flat sites were discovered. Structurally, Cherwon Castle is rotated about nine degrees to the northeast, forming a planar rectangle. The planar structure derives from the castle design that mimics the hilly landform, and the bending of the southwestern wall also attests to the intention of the architects to avoid the wetland. For now, it is impossible to clearly describe the functions and characters of the building sites inside the castle. However, it is believed that the inner castle was marked out for space for the palace and government offices, while the space between the outer and inner castle was reserved as the living space for ordinary people. The presence of the hilly landform diminishes the possibility that a bangri (grid) zoning system existed. For some of the landforms, orderly zoning cannot be ruled out, as flat areas are commonly seen. As surveys have yet to be conducted on the different castles, the time when the walls were built and how they were constructed cannot be known. Still, the claim to that the castle construction and the structuring of inner spaces were inspired by the surrounding landforms is quite compelling.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.41 no.3
• /
• pp.47-58
• /
• 2023

This study was conducted through reviewing Aspects of Design and Construction in Entrance Space of the World Heritage Royal Tombs of the Joseon Dynasty, which is equipped with parking lots, ticket offices, toilets, exhibition halls, information boards, and rest facilities for the convenience of visitors and the purpose of this study was to propose a direction for improvement. The results of the study are as follows: First, the reduced area of Royal Tombs of the Joseon Dynasty was unable to fully accommodate the ritual movement line, and as a result, the location of the entrance space in the current royal tomb was decided to accommodate minimal convenience functions. In the meantime, the entrance space of the royal tombs has been relocated or renovated in order to achieve its integrity as a World Heritage Site, rational arrangement of movement lines and spatial utility. Second, the size of the entrance space ranges from 1,000 square meters in Jeongneung in Seoul to 16,000 square meters in Hongyuneung in Namyangju, and the number of annual users varies greatly from 12,000 in Onneung in Yangju to 410,000 in Seonjeongneung in Seoul. Considering the conditions of the 16 royal tombs, the entrance space should be provided at an appropriate scale, reflecting the surrounding land use and accessibility that affect the influx of users, the size of the site, and the king's awareness and preferences. Third, the location of the parking lot, the presence or absence of an outer courtyard and an internal courtyard bordering the ticket and check offices, and the location of the Historical and Cultural Museum made it possible to know the aspects of entrance space of the Joseon Royal Tombs, where the spatial configuration is determined Fourth, according to the royal tombs, it was found that the entrance space should have essential parking, access control, information, and convenience functions, and that support, exhibition, passage, and recess functions should be optional. At this time, the management office and the Historical and Cultural Center are in charge of support and exhibition functions. The function of passage can be a strategy that provides a sense of entry and the function of recess which has been introduced in only four royal tombs requires an appropriate location and landscape access.