• 자원환경지질
• /
• 제53권4호
• /
• pp.347-362
• /
• 2020

수환경 내 철 (수산)산화물은 주로 광산 활동에 의해 생성되며 주변 환경을 교란시키는 대표적인 교질물이다. 철 (수산)산화물들 중 지표에 많이 분포하고 있는 적철석은 수환경 내 다양한 환경인자들로 인해 거동 특성이 변한다. 본 연구는 배경용액의 이온 조성과 세기, pH, 자연 유기물 등의 환경적 인자가 교질상 적철석의 거동에 미치는 영향을 살펴보고자 수행되었다. 특히, 적철석 교질물 입자들의 거동특성을 보다 더 명확하게 해석하고자 동적광산란분석기(dynamic light scatterer, DLS)와 단일입자 유도결합플라즈마질량분석기(single particle ICP-MS, spICP-MS)를 비교하여 분석을 수행하였다. 배경용액의 이온 조성과 세기가 변함에 따라 적철석 입자의 표면 확산이중층의 두께가 변화될 뿐만 아니라, 입자에 미치는 정전기적 힘과 van der Walls의 합력이 변하면서 입자의 응집/분산 특성이 달라지는 것으로 나타났다. 또한 수환경의 pH가 적철석 입자의 영전하점(point of zero charge, PZC)에서 멀어질수록 정전기적 반발력이 커져 입자들이 분산되는 것을 확인하였다. 수환경 내 자연 유기물이 적철석의 표면을 코팅함에 따라서 자연 유기물 표면에 존재하는 카르복실기와 페놀기 등과 같은 작용기들로 인하여 적철석 입자의 정전기적 안정화와 구조적 안정화가 증가하는 것으로 조사되었다. 이러한 안정화 효과는 자연 유기물의 농도가 작을수록 증가하지만, 상대적으로 이온포텐셜이 큰 2가 양이온이 1가 양이온보다 자연 유기물로 코팅된 적철석 입자들 사이에서 더 큰 가교역할을 하기 때문에 자연 유기물로 코팅된 적철석 입자들의 안정화(분산)를 방해하는 것으로 확인되었다. 결론적으로, 수환경 내 교질상 적철석의 거동 특성은 이온의 조성과 세기, pH, 그리고 자연 유기물 등과 같은 환경적 인자들에 많은 영향을 받는 것을 정량적으로 확인할 수 있었는데, 그 중 자연 유기물은 수환경에서 교질물의 거동에 매우 지배적이고 주요한 제어인자임을 알 수 있었다. 한편, 적철석 입자의 거동 특성을 정량화할 수 있는 두 분석기법을 비교한 결과, DLS 분석기법은 신속성 및 편의성에서 강점을 지니는 반면 spICP-MS의 분석기법은 입자의 모양 및 응집 형태 등을 고려할 수 있는 장점이 있기 때문에 두 분석기법을 조합하여 활용하면 수환경 내 교질물의 거동 특성을 연구하는데 보다 더 효과적일 것으로 판단된다.

• 대한화학회지
• /
• 제58권2호
• /
• pp.205-209
• /
• 2014

Hematite iron oxide (${\alpha}$-$Fe_2O_3$) nanowalls were fabricated on aluminum substrate by a facile solvent-assisted hydrothermal oxidation process. The XRD and EDS patterns indicate that the sample has a rhombohedral phase of hematite $Fe_2O_3$. FE-SEM, TEM, HR-TEM, SA-ED were employed to characterize the resulting materials. $N_2$ adsorption-desorption isotherms was used to study a BET surface area. Their capability of catalytic degradation of titan yellow GR azo dye with air oxygen in aqueous solution over $Fe_2O_3$ catalysts was studied. The result indicates that the as-prepared product has a high catalytic activity, because it has a larger surface area. Langmuir and Freundlich isotherms of adsorption dye on the catalysts surface were investigated and the decomposition of titan yellow GR follows pseudo-first order kinetic.

• 한국광물학회지
• /
• 제12권1호
• /
• pp.32-42
• /
• 1999

Microbial mats, the yellow and reddish brown deposits formed from the mine drainage, occur on the bottom of drain and mine tailing pond of the Ilkwang mine in Pusan, Korea. The constituents of microbial mats and their biomineralization were studied by using XRD, IR, and SEM-EDX. The upper part of the microbial mat is yellow-colored and composed of tube-shaped and small spheroid bacterial materials, which are mainly made up of amorphous and poor-crystalline iron-oxide minerals. The shape and composition of bacterial materials suggest that they are probably belong to iron-oxide mineral aggregates. The iron-oxide minerals of the yellow microbial mats are mainly goethite, but those of the reddish brown microbial mats contain abundant hematite along with goethite. This implies that with the evolution of biomats, goethite may be transformed to hematite.

• 한국세라믹학회지
• /
• 제23권2호
• /
• pp.31-37
• /
• 1986

The effect of dehydration temperature on the reduction process of silica-coated hematite was invest-igated The particle shape and magnetic properties of the products reduced from hematite at various conditions and the oxidation resistance of silica-coated iron powder were examined. It was revealed that single phase iron powder obtained over 45$0^{\circ}C$ had good magnetic properties. The iron powder manufactured between 45$0^{\circ}C$ and 50$0^{\circ}C$ displayed the maximum coercive force as a result of maintaining its acicular shaped. However the coercive force of iron powder reduced over 50$0^{\circ}C$ was decreased. The oxidation resistance of silica-coated iron powder in air was very good up to 11$0^{\circ}C$ and for 12 days.

• 한국세라믹학회지
• /
• 제18권2호
• /
• pp.105-111
• /
• 1981

The iron precipitates were prepared by adding sodium carbonate solution to ferrous chloride and ferric chloride solutions to pH=9 and pH=4.5, respectively. The thermal reaction of the iron precipitates was investigated by means of TGA, DTA and X-ray diffraction. In the former the crystallization of $\alpha$-$Fe_2O_3$ begins at about 35$0^{\circ}C$, while in the latter at about 30$0^{\circ}C$, during the calclnation in air. In the iron precipitate from ferrous chloride solution, the activation energy for the crystallite-growth or $\alpha$-TEX>$Fe_2O_3$ in air is about 7.6$\times$104J/mole between 800 and 100$0^{\circ}C$. As the result of X-ray diffration for the reduction product of hematite, it was found that maghemite, magnetite and wustite are formed and that hematite is transformed to magnetite through maghemite.

• Corrosion Science and Technology
• /
• 제11권3호
• /
• pp.82-88
• /
• 2012

The thickness and chemical composition of oxides on heat recovery steam generator tubes of combined cycle power plant were examined in order to evaluate the corrosion of the tubes. Tubes were removed from the plant after actual operations for 21,482, 42,552 and 56,123 hours respectively. Thickness and growth rate of the oxide scale on reheater inner tube (SA213-T22) were very high compared to those other tubes. The oxide scale was about $250{\mu}m$ thick and uniform. The components of the scale were iron oxides. The oxide scale was mixed oxides consisting of magnetite$(Fe_3O_4)$ and hematite$(Fe_2O_3)$. The oxide on inner tube was removed using many kinds of chemicals and it was found that chelating agents were dissolved faster than other chemicals.

• Corrosion Science and Technology
• /
• 제7권6호
• /
• pp.362-369
• /
• 2008

The impact abrasion behavior of high manganese steel is investigated under three kinds of impact energy in acid hematite ore slurry by using a modified MLD-10 impact abrasion tester. Through the SEM observation of the worn surface and the optical metallographic analysis of the cross-sectional samples, the corrosive impact abrasion mechanisms of the steel under different impact energies are studied. In acid-hematite slurry, the variations of impact energies would result in synchronous transformation of the impact abrasion properties and mechanisms of the high manganese steel in the corrosive condition, as led different corrosive impact abrasion mechanism under different impact energies.

• 한국세라믹학회지
• /
• 제35권8호
• /
• pp.843-849
• /
• 1998

Fine powders of Mn-Zn ferrite were prepared by the alcoholic dehydration method and densification beha-vior of synthesized powder was investigated. The concentration and pH of solution for optimal precipitation was 0.4M and 2.5 respectively. The spinel single phase metastable state was formed by thermal decom-position of precipitate and then spinel phase was disintegrated into hematite and spinel {{{{ { { ZnFe}_{2 }O }_{4 } }} at 600$^{\circ}C$ With increase of temperature reaction of solid solution between hematite and spinel was proceeded and resulted in the spinel single phase (Mn, Zn Fe){{{{ { {Fe }_{2 }O }_{4 } }} On account of high reactivity of uncalcined powders densification started at 200$^{\circ}C$ lower and completed at 50$^{\circ}C$ lower in comparison with calcined powders.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2015년도 추계학술논문요약집
• /
• pp.465-466
• /
• 2015

In this study, different amount of (fe(0)) were dissolve into different strength of phosphoric ($H_3PO_4$) acid and the optimum solubility was observed at 0.89M Fe(0) into 4M of $H_3PO_4$ acid. Different concentration of oxalic acid was added to determine the optimum precipitated condition. The dissolution kinetics of Fe(0) into $H_3PO_4$ acid was investigated at $40-50^{\circ}C$. The optimum Fe-oxalate precipitate was dried and thermal decomposition using DSC-TG was conducted. Approximately 52 wt(%) of oxalic acid was removed at $300^{\circ}C$. Iron oxides such as magnetite and hematite that may be formed on the surface of nuclear waste were also dissolved into the $H_3PO_4$ acid and the optimum solubility for magnetite is 0.005M while that for hematite is 0.02M in 8M $H_3PO_4$ acid, respectively.

• 한국초전도ㆍ저온공학회논문지
• /
• 제24권3호
• /
• pp.7-11
• /
• 2022

We are conducting research and development of magnetic filters for magnetic separation targeting paramagnetic materials. In order to develop a new magnetic filter with a large magnetic gradient, stainless fiber (SUS430, 120 mm × 3 mm) with a triangular cross section was sintered with a high void ratio (~ 70%) and the magnetic filter (20 mm × 2 mm) was created. When this magnetic filter was used to perform magnetic separation of hematite (particle size 50 ㎛) under a maximum magnetic flux density of 1.49 T, high separation rates were obtained.