• 한국세라믹학회지
• /
• 제31권2호
• /
• pp.117-128
• /
• 1994

Hematite particles were obtained by hydrothermal reaction of ferric hydroxide in the presence of small amount of citric acid which is acted as crystal growth controller. The effects of hydrothermal reaction condition son the morphology and crystal structure of powder were investigated using X-ray, TEM and FT-IR. Ellipsoidal or rectangular hematite particles were formed in the range of pH 10.75~11.75 as initial basicity of reactants and 3$\times$10-5 ~9$\times$10-5 mol as citric acid content. Crystallization of hematite was inhibited in the range of pH9. 0~10.5 and above citric acid content of $1.5\times$10-4 mol. Hematite particle length and aspect ratio were decreased gradually with increasing of citric acid content. Hematite particles formed at 14$0^{\circ}C$ exhibited particle properties with the length of 0.7 ${\mu}{\textrm}{m}$ and aspect ratio of 8. Hematite particles having a good acicular-type were not obtained above 22$0^{\circ}C$.

• Advances in environmental research
• /
• 제5권1호
• /
• pp.51-59
• /
• 2016

In this study, nitrate reduction of real groundwater sample by 2.2%Cu-1.6%Pd-hematite catalyst was evaluated at different nitrate concentrations, catalyst concentrations, and recycling. Results show that the nitrate reduction is improved by increasing the catalyst concentration. Specific nitrate removal by 2.2%Cu-1.6%Pd-hematite increased linearly with the increase of nitrate concentration showing that the catalyst possesses significantly higher reduction capacity. More than 95% nitrate reduction was observed over five recycles by 2.2%Cu-1.6%Pd-hematite with ~56% nitrogen selectivity in all recycling batches. The results from this study indicate that stable reduction of nitrate in groundwater can be achieved by 2.2%Cu-1.6%Pd-hematite over the wide range of initial nitrate inputs.

• 한국토양환경학회지
• /
• 제1권2호
• /
• pp.51-60
• /
• 1996

본 연구에서는 산업폐기물로 버려지는 hematite와 ferrite를 이용하여 Mn-EDTA와 불소의 제거에 대한 실험을 행하였다. 제거율을 비교, 평가하기 위하여 무기오염물에 대하여 우수한 흡착능을 가지는 것으로 알려진 Na-bentonite를 실험에 포함하였다. Batch형태의 실험 결과, 망간에 대하여 여러 초기농도에서 ferrite-A는 48∼65 %, ferrite-B는 46∼57 %, hematite 의 경우 17∼26%o의 제거율을 갖는 것으로 나타났으며, Na-bentonite의 경우, 10∼23%의 제거율을 나타냈다. 불소의 경우에는 hematite가 53∼63%의 제거율을, ferrite-A가 54∼63%, ferrite-B는 20∼38%를 보였다. 연구 결과 Hematite와 Ferrite가 가지고 있는 특히 complex ion을 형성하는 무기 오염 물질 제거능이 Na-bentonite 보다 우수한 것으로 나타났다. 결론적으로 이러한 산화 광물과 Na-Bentonite 의 혼합을 통하여 차수재로서의 Na-bentonite의 역할을 증진시킬 수 있을 것이다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 추계학술발표회
• /
• pp.78-82
• /
• 2003

Development of hematite-coated sand was evaluated for the application of the PRB (permeable reactive barrier) in the arsenic-contaminated subsurface of the metal mining areas. The removal efficiency of As(III) and As(V), the effect of anion competition and the capability of arsenic removal in the flow system were investigated through the experiments of adsorption isotherm, arsenic removal kinetics against anion competition and column removal. Hematite-coated sand followed a linear adsorption isotherm with high adsorption capacity at low level concentrations of arsenic (< 1.0 mg/l). When As(III) and As(V) underwent adsorption reactions in the presence of anions (sulfate, nitrate and bicarbonate), sulfate caused strong inhibition of arsenic removal, and bicarbonate and nitrate caused weak inhibition due to specific and nonspecific adsorption onto hematite, respectively. In the column experiments, high content of hematite-coated sand enhance the arsenic removal, but the amount of the arsenic removal decreased due to the higher affinity of As(V) than As(III) and reduced adsorption kinetics in the flow system, Therefore, the amount of hematite-coated sand, the adsorption affinity of arsenic species and removal kinetics determined the removal efficiency of arsenic in the flow system. arsenic, hematite-coated sand, permeable reactive barrier, anion competition, adsorption.

• 한국세라믹학회지
• /
• 제22권6호
• /
• pp.87-93
• /
• 1985

The hematite the magetite and the maghemite thin film were prepared by oxidation and reductino of the vaccum-evaporated iron thin film. Interre;atoms between film preparation process and the electrical properties were investigated. At room temperature the electrical conductivity of the iron the hematite the magnetite and the maghemite thin film were $1{\times}10^4\Omega^{-1}cm^{-1}$, 2{\times}10^{-5}\Omega^{-1}cm^{-1}$, $3{\times}10^{-5}\Omega^{-1}cm^{-1}$, and $4{\times}10^{-5}\Omega^{-1}cm^{-1}$, resp-ectively. The surface of each thin film was dense and homogeneous. At the temperature that the iron thin film was converted into the hematite thin film the electrical conductivity decreased rapidly and the electrical con-ductivity of the hematite thin film increased as temperature increased. The hematite thin film was reduced to the magnetite thin film in H2 atmosphere. The electrical conductivity decreased rapidly at the temperature that the maghemite thin film is formed by oxidation of the magnetite thin film and the electrical conductivity of the maghemite thin film increased as temperature increased.

• Nuclear Engineering and Technology
• /
• 제53권9호
• /
• pp.2918-2925
• /
• 2021

The efficiency of decontamination of model spent ion exchange resins, contaminated with magnetite and hematite, with mineral acid solutions, and using electro-decontamination, was evaluated. It has been shown that effective hematite dissolution occurs in concentrated mineral acid solutions. However, the use of direct current increases the decontamination efficiency of spent ion exchange resins contaminated with hematite. It is determined that with increasing voltage and acid concentration, the dissolution efficiency of hematite deposits increases and can exceed 99%. It has been shown that hematite dissolution is accompanied by secondary adsorption of radionuclides due to ion exchange, which can be removed with sodium nitrate solutions.

• 센서학회지
• /
• 제30권4호
• /
• pp.210-217
• /
• 2021

Gas sensors based on semiconducting metal oxides have attracted considerable attention for various applications owing to their facile, cheap, and small-scale manufacturing processes. Hematite (α-Fe₂O₃) is widely considered as a promising candidate for a gas-sensing material owing to not only its abundance in the earth's crust and low price but also its chemical stability and suitable bandgap energy. However, only a few studies have been performed in this direction because of the low gas response and sluggish response of hematite-based gas sensors. Nanostructures present a representative solution to both overcome these disadvantages and exploit the desirable features to produce high-performance gas sensors. However, several challenges remain for adopting gas sensors based on metal oxide nanostructures, such as improving cost efficiency and facilitating mass production. This review summarizes the recent studies on gas sensors based on hematite nanostructures. It also provides useful insights into various strategies for enhancing the gas-sensing properties of gas sensors based on hematite nanostructures.

• 자원환경지질
• /
• 제31권4호
• /
• pp.291-296
• /
• 1998

토양 적철석은 오염물질 및 영양분의 흡착과 미세한 입자들의 입단화 매개체로서 잘 알려져 있다. 미세하게 분말화 시킨 결정질 적철석을 두 사질 양토 (Anahuac and Crowley soils from the Southern Coastal Plain, USA)에 첨가하였을 때 나타나는 물리화학적 특성의 변화를 측정하였다. 적철석을 3% (무게비)까지 첨가하였을 때 토양의 투수율이 증가하였으나 그 이상 양을 첨가하였을 때 감소되었다. 토양의 입단안정도 (AS)는 적철석 첨가에 영향을 받지않았다. 같은 양의 적철석을 Anahuac soil과 Crolwey soil에 첨가하였을 때 높은 유기물의 함량과 낮은 Na 흡착비 (SAR: sodium adsorption ratio)를 가진 Anahuac soil은 Crowley soil에 비해 상대적으로 높은 투수율과 입단안정도를 보여주었다. 두 토양 모두 Zn 흡착은 약간 증가하였으나 인산염 흡착은 영향을 받지않았다.

• 한국재료학회지
• /
• 제27권4호
• /
• pp.206-210
• /
• 2017

In this study, an ${\alpha}-Fe_2O_3$ (hematite) coated porcelain plate was sintered in a temperature range from $1100^{\circ}C$ to $1250^{\circ}C$ using ferrous sulfate. The specimens were investigated by X-ray diffractometer (XRD), scanning electron microscopy (FE-SEM), energy dispersive spectroscopy (EDS), and UV-visible spectrophotometer. It was confirmed that ${\alpha}-Fe_2O_3$ (hematite) was densely fused to the surface at several tens of ${\mu}m$, the ${\alpha}-Fe_2O_3$ (hematite) was in the form of thin platelet and polyhedra, and no other compounds appeared in the sintering process. In the specimen coated with ${\alpha}-Fe_2O_3$ (hematite), the reflectance spectra show a red absorption band of 560-650 nm. The $L^*$ value decreased from 53.18 to 46.94 with the firing temperature. The values of $a^*$ and $b^*$ were at 19.03 and 15.25 at $1100^{\circ}C$ and gradually decreased with increasing temperature; these values decreased rapidly at $1250^{\circ}C$ to 11.54 and 7.98, respectively. It is considered that the new phases are formed by the phase transition of the porcelain plate (clay), and thus the $a^*$ and $b^*$ values are greatly influenced.

• 한국지구과학회지
• /
• 제29권7호
• /
• pp.523-530
• /
• 2008

전통적 약재가공법인 초쉬법으로 수치된 적철석 약광물의 광물조성과 원소성분 변화를 고찰하였다. 적철석은 $650^{\circ}C$와 $900^{\circ}C$에서 각각 5회씩 초쉬법으로 수치되었다. 약재로 가공된 적철석은 수용액에서 원소 용출실험이 수행되었다. 초쉬법 수치에 따른 적철석의 광물상 변화는 없었다. 또한 $650^{\circ}C$와 $900^{\circ}C$에서 수치횟수와 원소 용출량의 변화 경향이 없는 것으로 보아 전통적 초쉬법에 의한 적철석의 약재 가공 효과는 불분명한 것으로 보인다. 그러나 가열된 약재를 식초에 담금질하는 가공법은 적철석을 부드럽고 분쇄되기 쉬운 약광물로 변화시키는 효과가 있다.