• 한국의학물리학회지:의학물리
• /
• 제28권3호
• /
• pp.100-105
• /
• 2017

The purpose of the present study was to develop and evaluate patient-customized helmets with a three-dimensional (3D) printer for radiation therapy of malignant scalp tumors. Computed tomography was performed in a case an Alderson RANDO phantom without bolus (Non_Bolus), in a case with a dental wax bolus on the scalp (Wax_Bolus), and in a case with a patient-customized helmet fabricated using a 3D printer (3D Printing_Bolus); treatment plans for each of the 3 cases were compared. When wax bolus was used to fabricate a bolus, a drier was used to apply heat to the bolus to make the helmet. $3-matic^{(R)}$ (Materialise) was used for modeling and polyamide 12 (PA-12) was used as a material, 3D Printing bolus was fabricated using a HP JET Fusion 3D 4200. The average Hounsfield Unit (HU) for the Wax_Bolus was -100, and that of the 3D Printing_Bolus was -10. The average radiation doses to the normal brain with the Non_Bolus, Wax_Bolus, and 3D Printing_Bolus methods were 36.3%, 40.2%, and 36.9%, and the minimum radiation dose were 0.9%, 1.6%, 1.4%, respectively. The organs at risk dose were not significantly difference. However, the 95% radiation doses into the planning target volume (PTV) were 61.85%, 94.53%, and 97.82%, and the minimum doses were 0%, 77.1%, and 82.8%, respectively. The technique used to fabricate patient-customized helmets with a 3D printer for radiation therapy of malignant scalp tumors is highly useful, and is expected to accurately deliver doses by reducing the air gap between the patient and bolus.

• 한국건강관리협회지
• /
• 제2권1호
• /
• pp.93-104
• /
• 2004

Purpose : This study was conducted to understand the health status and health behaviors of preschoolers to provide baseline data for developing health promotion programs. Method 'Parents of children attending day-care centers and guardians of preschoolers were recruited for the study. Data were collected from June to August2002 using a structured questionnaire. Result . Among 754 preschoolers, 17,3% were overweight, while 18.2% were underweight, while 15.9% and 23.2% were overweight and underweight respectively, among 85 children living with guardians. The most frequent infectious diseases that children have had previously were hand-foot-mouth disease, chicken pox, and measles. Current health conditions that children have frequently are respiratory disease and atopic dermatitis for bother groups. Only 54%-61% brush their teeth everyday at bedtime, 49%-54% wash their hands every time after returning home, 4.5%-8.8%wear bicycle helmets, 9,3%-11.1% use a child car seat, and 3.5%-8.1% eat fruits and vegetables five times a day, Children living with guardians were less likely toper form positive health behaviors compared with children in day-care centers. Conclusion 'Based on the study results, health professionals could plan and develop health promotion programs to change unhealthy behaviors of preschoolers targeting high-risk groups.

• 패션비즈니스
• /
• 제14권3호
• /
• pp.1-19
• /
• 2010

The Assyrians usually wore two types - the tunic and the shawl. These two types were worn alone, or in combination and changes were introduced by varying the proportions of the tunic or shawl. The tunic appeared to be of the sleeves are short and reaching to the ankles or shortened to knee length according to the rank. Assyrian shawl pattern can be divided into five distinct styless. Many of the styles were suitable for costumes to wear in religious plays and pageants. Fringed shawls were the trademark of forma1 Assyrian costume. The usual badge of rank was a long fringed shawl. Intermediate rank wore shawl with short fringes and lower grade wore no shawl at all. The military costume was comparative uniformity : conical helmets was regarded as Scythic in character, short, fringed tunics, wide belts or helmet, round caps and long tunics covered in metal scales, belted at the waist. Assyrian woman costume was the long tunic with fringed hem and a long fringed shawl or was a plaid tunic and wide belt over it. They wore gold crown and horned Cap and tiara, ugal (head-dress) and the most ordinary earrings were the drop and the cross shape and necklace was made of the coloured stones and bracelets ended with heads of animal was regarded as Scythy style or adorned with a rosette at the centre.

• 한국가스학회지
• /
• 제18권1호
• /
• pp.68-74
• /
• 2014

본 연구에서는 헬멧의 충격응답을 분석하기 위한 단순진동모델을 제시하였다. 실제 헬멧 설계 및 검증과정에서 사용하는 데이터에 기반을 두고 단자유도 진동모델을 채택하였다. 충격에 의한 과도진동응답을 산출하여, 헬멧의 감쇠, 고유진동수, 충돌속도와 같은 인자들이 헬멧의 충격응답에 미치는 영향을 고찰하였다. 최대 G-가속도는 감쇠가 증가함에 따라 감소하였고, 감쇠비가 0.6 이상이 되면 최대 가속도의 값은 변화가 없었다. 고유진동수와 충돌속도에 관하여는 선형적으로 증가하였다. 두부 상해기준(Head Injury Criterion, HIC) 과 최대가속도의 관계도 제시하였다. 본 연구에서의 해석모델이 고품질 경량화 헬멧의 설계과정에서 경제성 제고에 활용될 수 있기를 기대한다.

• 한국가스학회지
• /
• 제12권4호
• /
• pp.41-45
• /
• 2008

본 논문은 외부의 충격력을 차단하고, 충격에너지를 흡수하는 헬멧의 강도안전과 변형거동에 대한 수치적 연구를 수행한 것이다. 기존헬멧과, 보강뼈대와 주름댐퍼를 추가적으로 설치한 4개의 헬멧모델에 대한 응력 및 변형거동을 유한요소법으로 해석하였다. 헬멧의 정상부에 보강뼈대를 설치하면 헬멧의 강도 안전 향상에 유용하고, 헬멧의 하단부에 주름댐퍼를 설치하면 충격에너지 흡수효과가 우수하다는 것을 FEM 해석결과를 통해 확인할 수 있었다. 따라서 첨단헬멧을 안전하게 설계하기 위해서는 보강뼈대와 주름댐퍼를 새로운 설계요소로 고려할 것을 권장한다.

• 한국안전학회지
• /
• 제35권2호
• /
• pp.94-99
• /
• 2020

Bikers can be subjected to injuries from unexpected accidents even if they wear basic helmets. A properly designed airbag can efficiently protect the critical areas of the human body. This study introduces a wearable smart airbag system using machine learning techniques to protect human neck and shoulders. When a bicycle accident happens, a microprocessor analyzes the biker's motion data to recognize if it is a critical accident by comparing with accident classification models. These models are trained by a variety of possible accidents through machine learning techniques, like k-means and SVM methods. When the microprocessor decides it is a critical accident, it issues an actuation signal for the gas inflater to inflate the airbag. A protype of the wearable smart airbag with the machine learning techniques is developed and its performance is tested using a human dummy mounted on a moving cart.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.565-569
• /
• 2009

This paper proposed the safety helmet monitoring system based on USN(Ubiquitous Sensor Networks) to secure the wear of helmet for labor on the construction area. As one of the most significant gear to assure labor's safety, The safety helmet would have the extend of labor's injuries minimized whether one wears or not when an accident takes place. At this point, we have developed and demonstrated the system which is able to check who wear the safety helmet properly for labors, composed of safety helmets with sensor node, router nodes, sink node and management program. Moreover, we could show optimized parameters for the proposed USN system as doing experiment and demonstration, we expected that this system would make for labor wear the safety helmet properly on the construction area as well as prevent economic injury caused by an accident with not wearing for labors.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.89-94
• /
• 2016

Consumer orientation requires that companies understand consumer needs and produce products that meet their expectations. This study proposes a new additive method that creates a polymer/metal bonding layer and thus can lighten the weight of helmets to develop a consumer-oriented 3D printing helmet. The composite solution is experimentally prepared with copper formate and a photopolymer resin. Stereolithography apparatus and photothermal reactions are introduced to fabricate an adhesive hybrid layer of copper metal and polymer. A UV pulse laser with a 355 nm wavelength was installed to simplify this process. Resistance, adhesion, and accuracy were investigated to evaluate the properties of the layer produced.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.101-108
• /
• 2016

This study was initiated to minimize head injuries, which is the largest cause of increased external activity, traffic accident injuries, and death. We developed a low cost airbag that can be covered by a safety helmet based on consumer needs. The results of the survey showed that safety is the most important aspect of consumers' safety helmets. It also predicted that increasing the weight would present the biggest problem. Curved airbag cushion parts that can be attached to a helmet and the sensor part of a block type were designed. Impact analysis was performed by specifying the pressure inside the airbag and the volume of the airbag as variables.

• 한국기계가공학회지
• /
• 제15권6호
• /
• pp.109-114
• /
• 2016

This study executes Importance-Performance Analysis (IPA) on existing firefighter helmet attributes and gathers ideas for improvements from fire-fighting officers to develop a convergence firefighter helmet. The results of empirical analysis were as follows: First, the weight, head fitness, ease of wearing and removal, and ease of managing the existing helmet's attributes need urgent improvement. In addition, fire-fighting officers want to add innovative functions such as oxygen deficiency alarms, poison gas sensors, temperature sensors, and network communication systems to the convergence firefighter helmet under development.