• 제목/요약/키워드: Height of embankment

검색결과 120건 처리시간 0.026초

Aerodynamic effects of subgrade-tunnel transition on high-speed railway by wind tunnel tests

  • Zhang, Jingyu;Zhang, Mingjin;Li, Yongle;Fang, Chen
    • Wind and Structures
    • /
    • 제28권4호
    • /
    • pp.203-213
    • /
    • 2019
  • The topography and geomorphology are complex and changeable in western China, so the railway transition section is common. To investigate the aerodynamic effect of the subgrade-tunnel transition section, including a cutting-tunnel transition section, an embankment-tunnel transition section and two typical scenarios for rail infrastructures, is selected as research objects. In this paper, models of standard cutting, embankment and CRH2 high-speed train with the scale of 1:20 were established in wind tunnel tests. The wind speed profiles above the railway and the aerodynamic forces of the vehicles at different positions along the railway were measured by using Cobra probe and dynamometric balance respectively. The test results show: The influence range of cutting-tunnel transition section is larger than that of the embankment-tunnel transition section, and the maximum impact height exceeds 320mm (corresponding to 6.4m in full scale). The wind speed profile at the railway junction is greatly affected by the tunnel. Under the condition of the double track, the side force coefficient on the leeward side is negative. For embankment-tunnel transition section, the lift force coefficient of the vehicle is positive which is unsafe for operation when the vehicle is at the railway line junction.

비정상침투에 의한 증축제체의 침투거동과 안정성 (The Seepage Behaviour and Stability of Extension Embankment by Unsteady State Seepage)

  • 신방웅;배우석;이종규;강종범
    • 한국지반환경공학회 논문집
    • /
    • 제2권1호
    • /
    • pp.57-65
    • /
    • 2001
  • 본 연구에서는 증축하천제방의 침투거동과 안정성을 평가하기 위하여, 증축부의 투수계수와 홍수시 강우로 인한 수위상승속도를 3가지 경우로 변화시켜 가면서 평행흐름조건에서 침투모형실험과 유한요소해석을 통한 침윤선 변화와 홍수직후의 수위급상승시 제체사면의 안정성을 분석하여 제체침식에 대한 사면의 불안정성을 검토하였다. 침투모형실험은 평행흐름조건에서 서로 다른 증축재료의 투수계수 $k_1$, $k_2$, $k_3$와 홍수시 발생 가능한 수위상승속도 $v_1$, $v_2$, $v_3$를 각각 변화시키며 수행되었다. 증축체제의 침투거동은 증축부의 투수계수가 클수록 초기 침투거리가 길고, 제체하류사면에 유출점이 점차로 상승하며 시간에 따른 안전율이 감소하면서 국부적인 붕괴로 이어지는 불안정한 침투거동을 보여준다. 또한, 제체사면의 붕괴양상은 수위상승속도가 증가할수록 붕괴발생높이와 붕괴깊이가 증가함을 보여준다.

  • PDF

암석 버력으로 성토한 사면의 안정성 해석 (Stability Analysis of Embankment Slopes Consisting of Rock Fragments)

  • 김치환
    • 터널과지하공간
    • /
    • 제12권2호
    • /
    • pp.83-91
    • /
    • 2002
  • 암석 버력으로 성토한 사면의 역학적 안정성을 한계평형해석법과 유한차분법으로 검토하였다. 암석 버력 성토사면의 높이는 약 40 m이고 사면의 구배는 1:1.5이다. 암석 버력 성토체의 강도정수 중 점착력은 없고, 내부마찰각은 43$^{\circ}$로 가정하고 사면의 안정성을 해석하였다. 한계평형해석 중 Fellenius법과 Bishop법으로 구한 안전율 Fs는 1.4이었다. 또 유한차분법으로 사면의 안전율을 구하기 위해서 강도감소법을 이용하였고 파괴영역을 기준으로 결정한 사면의 안전율 Fs도 역시 약 1.4로 한계평형해석 결과와 동일하였다. 여러 기관에서 사면설계기준으로 적용하는 안전율 1.3과 비교할 때 암석 버력 성토사면은 안정상태로 확인되었다.

양산물금지구 피압수 특성에 관한 연구 (A Study of Artesian Characteristics in Yangsan/Mulgeum Site)

  • 한영철;유갑용
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 가을 학술발표회 논문집
    • /
    • pp.123-130
    • /
    • 1999
  • This paper presents a study of geotechnical treatment for artesian pressure after extensive investigation was performed on the distribution and characteristics of artesian condition which exists at Yangsan/Mulgeurn site. The result of analysis indicates that the artesian pressure seems to be up to 2.9M above the existing ground surface, originating from the higher ground water recharging sources in the surrounding hills and mountains. There is no harmful effect after the site development since the height of embankment is more than 4M above the existing ground surface.

  • PDF

성토지지말뚝에 작용하는 연직하중의 이론해석 (Theoretical Analysis of Embankment Loads Acting on Piles)

  • 홍원표;이재호;전성권
    • 한국지반공학회논문집
    • /
    • 제16권1호
    • /
    • pp.131-143
    • /
    • 2000
  • 연약지반속에 말뚝을 설치하고 성토를 실시할 경우 말뚝에 작용하는 연직하중을 산정할 수 있는 이론적 해석법을 개발하였다. 여기서 말뚝은 성토하중지지 효과를 증대시키기 위하여 일정간격의 줄말뚝 형태로 설치하며 각 줄말뚝의 두부는 지중보 형태의 말뚝캡보로 연결시킨 경우를 대상으로 한다. 이론식의 유도과정에서 성토지지말뚝으로 지지된 성토지반의 파괴발생 기구를 말뚝위 성토지반속의 파괴형태에 따라 지반아칭파괴와 펀칭전단파괴의 두 가지로 크게 구분하였다. 여기서 지반아칭은 말뚝캡보 사이의 간격이 좁거나 성토고가 충분히 높을 때 발생된다. 지반아칭파괴는 아치의 파괴부위에 따라 정상파괴와 캡파괴로 나누어 각 파괴형태의 안전성이 검토되었다. 또한, 제안식에 의한 성토지지말뚝의 하중분담효과는 말뚝캡보의 간격과 폭의 크기 및 지반정수에 크게 영향을 받고 있음을 알 수 있다. 즉, 말뚝캡보의 간격이 증가하면 말뚝의 하중분담효과는 감소하며 성토고, 말뚝캡보폭, 내부마찰각 및 점착력의 크기가 증가할수록 하중분담효과가 커지게 된다. 따라서 이러한 말뚝 및 지반에 관한 영향요소를 적절히 결정하면 성토지지말뚝의 성토하중분담 효과를 효과적으로 극대화시킬 수 있을 것이다.

  • PDF

방조재 시공을 위한 강제치환심도의 추정 (Estimation of Replacement Depth for the Sea-dike Construction)

  • 장병욱;우철웅;김성필
    • 한국농공학회논문집
    • /
    • 제47권1호
    • /
    • pp.35-42
    • /
    • 2005
  • The research has been done to obtain a empirical equation for the depth of replacement by the analysis of data collected from 8 sea-dike construction sites of south coast of Korean peninsula. The correlation analysis results show that the depth of replacement was mainly dependent upon the height of embankment and the undrained shear strength of soft soil. The suggested regression equation was quite well predicted the depth of replacement and recommended to use under certain restrictions where the embankment height was less than 10m and under 0.2 kgf/cm^{2} of the undrained shear strength of soil.

취약대를 가진 모형제방의 침투거동에 관한 연구 (A Study on the Seepage Behavior of Embankment with Weak Zone using Numerical Analysis and Model Test)

  • 박민철;임은상;이석영;한희수
    • 한국지반환경공학회 논문집
    • /
    • 제17권7호
    • /
    • pp.5-13
    • /
    • 2016
  • 본 연구는 투수계수가 큰 취약대가 제방에 존재할 경우의 침투거동에 관한 것이다. 침하계, 간극수압계, 수직 토압계 및 FDR 센서로 구성된 지점형 센서와 분포형 TDR 센서를 이용하여 제방의 침투특성 및 제방거동을 계측하였다. 계측결과들은 2차원 및 3차원 수치해석결과들과 비교 분석되었다. 모형제방은 길이 7m, 폭 5m, 높이 1.5m의 크기이며 제외지 수위는 1.3m인 세립질 모래로 조성된 제방이다. 계측 및 수치해석의 침투거동이 거의 유사하여 적절한 계측시스템으로 제방의 안정성을 실시간 모니터링할 수 있음을 알 수 있었다. 수치해석의 경우 정상단면에서는 2차원 및 3차원 해석결과가 거의 동일하나, 취약단면을 고려할 경우 2차원 해석의 침윤선이 3차원 결과보다 빠르게 진행된 후 두 결과가 수렴되었다.

기후변화에 따른 둑높임 저수지의 용수공급능력 평가 (Evaluating Water Supply Capacity of Embankment Raised Reservoir on Climate Change)

  • 이재남;노재경
    • 한국농공학회논문집
    • /
    • 제57권4호
    • /
    • pp.73-84
    • /
    • 2015
  • An embankment raising project on 113 agricultural reservoirs in Korea was implemented in 2009 to increase water supply capacity for agricultural water and instream uses. This study evaluated the future water supply capacity of the Imgo reservoir at which the agricultural reservoir embankment raising project was completed, considering climate change scenarios. The height of the embankment of the reservoir was increased by 4.5 m, thereby increasing its total storage from 1,657.0 thousand to 3,179.5 thousand cubic meters. To simulate the reservoir water storage with respect to climate changes, two climate change scenarios, namely, RCP 4.5 and RCP 8.5 (in which greenhouse gas reduction policy was executed and not executed, respectively) were applied with bias correction for reflecting the climate characteristics of the target basin. The analysis result of the agricultural water supply capacity in the future, after the agricultural reservoir embankment raising project is implemented, revealed that the water supply reliability and the agricultural water supply increased, regardless of the climate change scenarios. By simulating the reservoir water storage considering the instream flow post completion of the embankment raising project, it was found that water shortage in the reservoir in the future is not likely to occur when it is supplied with an appropriate instream flow. The range of instream flow tends to decrease over time under RCP 8.5, in which the greenhouse gas reduction policy was not executed, and the restoration of reservoir storage was lower in this scenario than in RCP 4.5, in which greenhouse gas reduction policy was executed.

Piled Raft 기초로 지지된 연약지반 상의 제방의 거동 (Behavior of the Embankment on Normally Consolidated Clay Supported by the Piled Raft)

  • 김상규;송선옥;한성길;전진규;이완성
    • 한국지반공학회논문집
    • /
    • 제27권4호
    • /
    • pp.33-41
    • /
    • 2011
  • 서 김해평야에 위치하는 연장 2km의 철도제방은 정규압밀점토인 연약지반 상에 건설되었다. 연직 배수재를 타입하고 단계시공으로 1단계의 시공을 한 직후에 제방은 종방향 균열이 생겨 원호활동의 징조가 나타났다. 이 단계에서 piled raft로 설계변경하고 제방을 완공하였다. 여러 측점에 다양한 계측기를 설치하여 제방 시공 중 piled raft의 거동을 관찰하였다. 이 결과를 정리하여 piled raft 기초의 안전성을 분석한 결과를 이 논문에 기술하였다. 말뚝 무리가 마찰말뚝으로 작용할 때에는 piled raft 기초는 정규압밀점토에서도 안전하고 경제적인 설계가 될 수 있다는 것을 계측결과로 부터 알게 되었다.

필터간격을 고려한 농업용저수지 제체의 침투특성 (Seepage Characteristics of Agricultural Reservoir Embankment Considering Filter Interval)

  • 이영학;이달원
    • 한국농공학회논문집
    • /
    • 제60권1호
    • /
    • pp.1-10
    • /
    • 2018
  • This study analyzed pore water pressure, seepage and leakage quantity, height of seepage and critical hydraulic gradient in order to suggest the seepage characteristics of agricultural reservoir embankment considering filter interval. The seepage characteristics of a deteriorated reservoir embankments were conducted according to the horizontal filter intervals range using three- dimensional finite element analysis. The wider the horizontal filter interval, the higher the pore water pressure increased, and the pore water pressure ratio in the center of the core has a greater effect than the base part. The seepage and leakage quantity appeared largely in the two-dimensional analysis conditions (case 1), where the filter was constructed totally in the longitudinal direction of the embankment, the wider the horizontal filter interval was gradually reduced. The reasonable filter intervals to yield efficient seepage characteristics were within 30 m for the pore water pressure of the core and the height of the seepage line. The stability of the filter installation was able to evaluate the stability of the piping by the critical hydraulic gradient method. The deteriorated reservoir with no filters or decreased functionality can significantly reduce the possibility of piping by simply installing a filter on the downstream slope. In the future, the deteriorated reservoir embankment should be checked for the reservoir remodeling because the core and filter functions have been lost or decreased significantly. In the case of a new installation, the seepage characteristic behavior due to the core and filter changes should be applied to the field after obtaining a reasonable horizontal filter interval that satisfies the safety factor by a three-dimensional analysis.