• 열처리공학회지
• /
• 제26권5호
• /
• pp.233-240
• /
• 2013

Rapid and homogeneous heating in heat treatment has been a challenging engineering issue throughout a heating temperature over $1,000^{\circ}C$. Induction heating has been widely used in field of heat treatment compared with conventional heating system. Advantages in homogeneous heating, simple fabrication, and repeatable use can be efficiently made with the induction heater. In this paper, numerical analysis of an induction coil system for heat flux gauge heating is performed. The effect of configuration on the heating performance was considered in various cases of the coil radius, distance between the winding, relative height difference between the heat flux gauge and the coil, and the applied current frequency. Temperature distribution within the heat flux gauge at frequency-steady state was calculated with a finite element method. Sensitivity analysis was also performed and the relative importance of 2 key parameters; coil radius, distance between the winding, were taken as main contributors for induction heating.

• 대한전자공학회논문지
• /
• 제4권2호
• /
• pp.3-15
• /
• 1967

감마선 후방산란을 이용한 철관 두께 측정용 측후계의 설계의 있어서 1/2인치 이하의 얇은 NaI 크리스털을 사용함으로써 계측부에 있어서 1개의 파고선별회로와 Anti-coincidence Circuit를 제거할 수 있다. 이 방식은 종래의 방식에 비하여 훨씬 회로가 경제적이면서도 거의 비슷한 정밀도와 안정도를 유지할 수 있다. 본논문에서는 위와 같은 새로운 방식에 의하여 설계, 시작된 측정기로서 지금까지 타연구자에 의하여 시도되지 않았던 200℃의 고온파이프의 관순측정실험을 행하였던바 상온에서의 측정치보다 불과 5%이내의 변화밖에 가져오지 않음을 실험적으로 확인하였다.

• 대한조선학회논문집
• /
• 제29권3호
• /
• pp.125-130
• /
• 1992

실제 해상에서 운항중인 선박의 6자유도 운동 및 해상의 파도를 계측할 수 있는 시스템을 개발하였다. 이 시스템은 Miles의 방법에 따라 7개의 가속도계로 선체의 운동을 계측하고, 초음파 파고계를 이용하여 선수부에서의 상대운동을 계측하여 상대운동에서 선체운동을 소거함으로써 해상에서의 파랑에 관한 정보(파고 및 주기)를 해석할 수 있다. 모형시험을 수행하여 개발된 시스템의 우수성을 확인하였으며, 원격조종 모형시험시 운동계측기로의 적용가능성도 발견하였다.

• 한국농림기상학회지
• /
• 제8권4호
• /
• pp.270-274
• /
• 2006

본 연구에서 고안 설계한 적설 관측용 수위 센서는 야외에서 일 변화량은 0.1 mm 내외의 적은 양의 오차를 기록하여 강설관측 센서로 적합한 것으로 판명되었으며, 실내 검정 결과 기상청에서 요구하고 100 mm의 강수 검정범위에 대해서 1%이하의 신뢰성 있는 검정결과를 나타내어 강설량 관측에 적합한 것으로 판명되었다. 또한 $-20^{\circ}C$의 테스트에서도 0.1 mm에 해당하는 아주 작은 변화 값을 타나내어 겨울철 야외환경에도 적합한 것으로 판명되었다. 깔때기가 없으며 수수구의 크기에 제한을 받지 않는 새로운 강수 관측구조는 적은 양의 강설관측이 가능하여 겨울철 예보에 필요한 레이다. 영상과 위성 영상에 의한 강설 연구와 해석에 많은 도움을 줄 수 있을 것이다. 또한 적설상당수량 관측이 가능하여 수자원 분야의 연구에도 많은 도움이 될 수 있다. 부동액을 사용하므로 고체 상태의 강설에 대해서 직접 관측이 가능하여 강설 관측에 있어 문제점으로 지적이 되고 있는 신적설 관측의 어려움을 해결할 수 있으며, 추후 야외 관측용 모델을 제작하여 야외 환경에서 여타 장비들과 비교 실험을 통해서 성능을 검정하고 개선할 계획이다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 추계학술대회
• /
• pp.641-642
• /
• 2010

삼각함수는 직각삼각형에서 한 각의 크기가 일정하면, 이들 변의 비의 값은 삼각형의 크기에는 관계없이 일정하다는 가장 단순하고 독특한 성질에 기초를 둔 학문이다. 직삼각형의 밑변의 길이와 건물을 올려다본 각이 있다면 건물의 높이를 삼각함수를 이용하여 구할 수 있다. 이는 차를 타고 이동하면서 건물의 높이를 가늠할 수 있는 좋은 방법이라고 볼 수 있다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.312-316
• /
• 2002

Satellite radar interferometry data shows a strong coherent signal on oyster sea farms where artificial structures installed on the bottom. We obtained 21 highly coherent interferograms from eleven JERS-1 SAR data sets despite of large orbital baseline (~2 km) or large temporal baseline (~l year). The phases observed in sea farms are probably induced by double bouncing on sea surface, and consequently reveal a tide height variation. To restore the absolute sea level changes we counted the number of wrapping by exploiting the intensity of backscattering. Backscattering intensity is closely correlated with the change in water surface height, while interferometry gives the detailed variation within the limit of 2$\pi$ (or 15.3 cm). Comparing the radar measurements with the tide gauge records yielded a correlation coefficient of 0.96 and an ms error of 6.0 cm. The results demostrate that radar interferometry is promising to measure sea level.

• Journal of Korean Neurosurgical Society
• /
• 제44권5호
• /
• pp.327-333
• /
• 2008

Objective: The purpose of this study is to verify the usefulness of the rabbit model for disc degeneration study. Materials: The L1-L2, L2-L3, L3-L4. or L4-L5 lumbar intervertebral disc (IVD) of 9 mature male New Zealand White rabbits were injured by inserting a 16-gauge needle to a depth of 5 mm in the left anterolateral annulus fibrosus while leaving L5-L6 IVD uninjured. Three other rabbits also received intradiscal injections of rabbit disc cells transfected with adenovirus and bone morphogenetic protein-2 (ad-BMP-2) at L4-L5 in addition to injury by 16-gauge needle at the L1-L2 level. Using digitized radiographs, measurements of IVD height were made and analyzed by using the disc height index (DHI). Magnetic resonance imaging (MRI) scans of the injured discs, injected discs, and uninjured L5-L6 discs were performed at 15 weeks post surgery and compared with preoperative MRI scans. Results: All twelve rabbits showed consistent results of disc degeneration within 15 weeks following annular puncture. DHIs of injured discs were significantly lower than that of the uninjured L5-L6 discs (p<0.05). The mean value of disc degeneration grade of injured discs was significantly higher than that of uninjured discs (p<0.05). The injection of disc cell transfected with ad-BMP-2 did not induce disc regeneration at 15 weeks after injection. Conclusion: This study showed that the injured disc had a significant change in DHI on simple lateral radiograph and disc degeneration grade on MRI scans within 15 weeks in all rabbits. Rabbit annular puncture model can be useful as a disc degeneration model in vivo.

• 대한원격탐사학회지
• /
• 제18권5호
• /
• pp.255-261
• /
• 2002

Strong and coherent radar backscattering signals are observed over oyster sea farms that consist of artificial structures installed on the bottom. We successfully obtained 21 coherent interferograms from 11 JERS-1 SAR data sets even though orbital baselines (up to 2 km) or temporal baselines (up to 1 year) were relatively large. The coherent phases preserved in the sea farms are probably formed by double bouncing from sea surface and the sea farming structures, and consequently they are correlated with tide height (or instantaneous sea level). Phase unwrapping is required to restore the absolute sea level. We show that radar backscattering intensity is roughly correlated with the sea surface height, and utilize the fact to determine the wrapping counts. While the SAR image intensity gives a rough range of absolute sea level, the interferometric phases provide the detailed relative height variations within a limit of $2{\pi}$ (or 15.3 cm) with respect to the sea level at the moment of the master data acquisition. A combined estimation results in an instantaneous sea level. The radar measurements were verified using tide gauge records, and the results yielded a correlation coefficient of 0.96 with an r.m.s. error of 6.0 cm. The results demonstrate that radar interferometry is a promising approach to sea level measurement in the near coastal regions.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2002년도 유체기계 연구개발 발표회 논문집
• /
• pp.363-369
• /
• 2002

Orifice meter is the most widely used flowmeter in custody transfer between KOGAS and city gas companies. Absolute pressure value is needed to calculate the gas flow of orifice metering system, but the gauge pressure transmitters are mainly used in the field. In case that the gauge pressure transmitters are used, the fixed value as standard atmospheric pressure(101.325kPa) is applied for the absolute pressure value. The real, local atmospheric pressures of each metering station are different from the standard condition as the altitude and weather conditions. In this study the flow calculation errors were quantitatively analyzed through examining the atmospheric pressures of 50 stations of KOGAS. The data for analysis are such like the time data of supplied gas amount, the altitude of each metering station, the time data of atmospheric pressures and altitudes of each weather observatory. The results showed that the local atmospheric pressures were different from the standard value and the gas flow calculation errors were distributed between $-0.024\%{\~}0.025\%$ based on the supplied gas amount in the year 1999 and 2000.

• 대한치과보철학회지
• /
• 제42권6호
• /
• pp.664-670
• /
• 2004

Statement of problem. One of the common problems of dental implant prosthesis is the loosening of the screw that connects each component, and this problem is more common in single implant-supported prostheses with external connection. Purpose. The purpose of this study was to examine the changes of detorque values of abutment screws with external connection in different abutment heights. Materials and methods. After cyclic loading on three different abutment heights, detorque values were measured. Abutments were retained with titanium abutment screws tightened to 30 Ncm (30.5 kgmm) with digital torque gauge as recommended by the manufacturer. Replacing abutments, implants and titanium abutment screws with new ones at every measurement, initial detorque values were measured six times. In measuring de torque values after cyclic loading, Avana Cemented Abutments of 4.0 mm collar, 7.0 mm height (Osstem Co., Ltd., Seoul, Korea) were used with three different lengths of 5.0, 8.0, 11.0 mm. Shorter abutments were made by milling of 11.0 mm abutment to have the same force-exercised area of 4.5 mm diameter. Sine curve force (20N-320N, 14Hz) was applied, and detorque values were measured after cyclic loading of 2 million times by loading machine. Detorque values of initial and after-loading were measured by digital torque gauge. One-way ANOVA was employed to see if there was any influence from different abutment heights. Results. The results were as follows: 1. The initial detorque value was 27.8$\pm$0.93 kgmm, and the ratio of the initial detorque value to the tightening torque was 0.91(27.8/30.5). 2. Measured detorque values after cyclic loading were declined as the height of the abutment increased, that was, 5.0 mm; 22.3$\pm$0.82 kgmm, 8.0 mm; 21.8$\pm$0.93 kgmm, and 11.0 mm; 21.3$\pm$0.94 kgmm. 3. One-way ANOVA showed no statistically significant differences among these (p>0.05). 4. Noticeable mobility at the implant-abutment interface was not observed in any case after cyclic loading at all.