• 한국유체기계학회 논문집
• /
• 제11권3호
• /
• pp.43-49
• /
• 2008

The pump control valve is a butterfly valve that has an eccentric rotating axis. It is not only used as a butterfly valve to control the flow rate or pressure, but also as a check valve to prevent backward flow. A new design method of eccentric rotating axis is proposed to design the valve. The height of the rotating axis is determined through flow field analysis. A general purpose of computational fluid dynamics software system, Fluent is used to simulate the fluid flow. Flow field analysis is performed for various heights of the rotating axis and different opening angles of the valve. A characteristic function is defined for estimating the flow characteristics based on the results of flow field analysis. The characteristic function is defined in order to determine the height of the rotating axis. An optimization problem with a characteristic function is formulated to determine the amount of eccentricity. The height of the Totaling axis of the valve is determined through solving the optimization problem.

• BioChip Journal
• /
• 제12권4호
• /
• pp.280-286
• /
• 2018

Hydrogel scaffolds composed of multiple components are promising platform in tissue engineering as a transplantation materials or artificial organs. Here, we present a new fabrication method for implementing multi-layered macroscopic hydrogel scaffold composed of multiple components by controlling height of hydrogel layer through precise control of ultraviolet (UV) energy density. Through the repetition of the photolithography process with energy control, we can form several layers of hydrogel with different height. We characterized UV energy-dependent profiles with single-layered PEGDA posts photocrosslinked by the modular methodology and examined the optical effect on the fabrication of multi-layered, macroscopic hydrogel structure. Finally, we successfully demonstrated the potential applicability of our approach by fabricating various macroscopic hydrogel constructs composed of multiple hydrogel layers.

• 원예과학기술지
• /
• 제19권4호
• /
• pp.568-573
• /
• 2001

본 실험은 triazole계 화합물을 백일홍 'Dream Land Rose'와 'Dream Land Scarlet'에 경엽살포 또는 토양관주처리를 하여 생육 및 개화에 미치는 영향을 조사하기 위하여 수행하였다. 경엽살포처리에서 'Dream Land Rose'의 초장은 tebuconazole, diniconazole, bitertanol에서 크게 감소하였으며 특히, tebuconazole이 가장 큰 왜화효과를 보였고 지상부 생체중도 가장 적었다. 꽃의 직경, 생체중, 건물중도 tebuconazole 고농도에서 현저하게 감소하였다. 한편, 개화소요일수는 약제처리에 의한 영향을 받지 않았다. 'Dream Land Scarlet'의 초장도 모든 처리에서 감소하였고, 특히 tebuconazole에서 현저한 감소를 보였다. 개화소요일수는 diniconazole에서 단축되었다. 토양관주처리에서 'Dream Land Rose'의 초장은 diniconazole과 myclobutanil에서 감소하였으나 diniconazole이 더 효과적이었다. 개화소요일수는 diniconazole에서 단축되었다. 'Dream Land Scarlet'의 초장은 모든 처리에서 감소하였으며, mycrobutanil $300mg{\cdot}L^{-1}$에서 극심한 억제현상을 보여서 개화가 이루어지지 못하였다. 개화소요일수는 diniconazole에서 증가하는 경향을 보였다.

• 대한치과교정학회지
• /
• 제24권2호
• /
• pp.275-294
• /
• 1994

The occlusal interference during adolescent period makes some effects on growth and development and morphological changes. And so, if we could predict the the timing and results of orthodontic treatment who have occlusal interference during adolescent period, it may be helpful for diagnosis and treatment planning of orthodontic treatment. For about those, the purpose of this study was to evaluate the effects of the posterolateral displacement by the metal casting crown with inclined pathway on the mandibular condyle and morphologic changes of mandible in the rat. The experimental animals were thirty six Sprague-Dawley male rats of 8 weeks old. Eight of them was used as control group, and experimental group 1 ( continuous appliance wearing group ) was composed of sixteen and experimental group 2 ( appliance removal group after worn the appliances during 3 months ) was composed of remaining twelve. The animals of experimental grouop 1 were sacrificed after 1, 2, 3, 6 months from beginning of the experiment and experimental group 2 were sacrificed 1, 2, 3 months after removal of the appliance from worn the appliance during 3 months. Both of mandible and temporomandibular joint were observed histologically and radiologically. The results were as follows : 1. In experimental group 1, the mandibular length and lower posterior height were decreased with experimental period, while the lower anterior height was increased, and the curvature of lower incisors and lingual inclination of anterior alveolar bone were profound as compared with control group. 2. In experimental group 1, both of the thickness of the condylar cartilage were thinned in the posterosuperior region, and this phenomenon was more prominent on right than left in 3-Mo experimental period and both sides were marked thinned in 6-Mo experimental period. 3. In experimental group 2, the lower anterior height was low and lower posterior height was high as compared with experimental group 1, and the curvature of lower incisors and lingual inclination of anterior alveolar bone were recovered to control group. 4. In experimental group 2, both of the thickness of the condylar cartilage were thickened in the posterosuperior region, and this phenomenon was more prominent with experimental period. 5. In experimental group 2, the mandibular length was short, lower anterior height was hight, the curvature of lower incisors were profound, and in histologically, both of the thickness of the condylar cartilage were thickened in the posterosuperior region as compared with control group. As shown above, the occlusal interfemce affected the condylar cartilage, curvature of lower incisor, inclination of anterior alveolar bone, mandibular length, and anterior and posterior height. When the interference was removed, significant recover was found in condylar cartilage, mandibular length, and posterior height. Although no significance was found, other items of measurement showed trends for recovery.

• 제어로봇시스템학회논문지
• /
• 제22권11호
• /
• pp.932-936
• /
• 2016

In this paper, we present a method for the inspection of diamond wheels. In total, six items, including height, radius, and angle, need to be checked during the manufacturing of a diamond wheel. Automatic inspection through image processing is presented in this paper. First, a contour corresponding to the boundary of the diamond wheel is extracted from an image. Next, control points are selected by processing the contour. Seven control points are detected and used for the computation of the required item. Detailed procedures for the computation of the height, radius, and angle using control points are presented in this paper. Experimental results show the feasibility of the presented method.

• 한국초지조사료학회지
• /
• 제43권3호
• /
• pp.129-137
• /
• 2023

Corn silage is extensively utilized in ruminant feeding on a global scale, with substantial research efforts directed towards enhancing its nutritional worth and managing moisture content. The purpose of this study was to assess the impact of normal cutting height and elevated cutting height on whole-crop corn silage. Corn was harvested at heights of 15 cm and 45 cm above the ground, respectively, 45 days after heading. The harvested corn was cut into 2-3 cm lengths and packed into 20-liter plastic silos in triplicate. The results showed that dry matter (DM), crude protein (CP), water soluble carbohydrates (WSC), and in vitro dry matter digestibility (IVDMD) of C45 were significantly higher than those of the control, while the neutral detergent fiber (NDF) was significantly lower in C45 (p<0.05). The C15 had higher yields than C45 (p<0.05). There was no significant difference in the total digestible nutrients (TDN) yield of whole-crop corn silage. The increase in cutting height resulted in a larger change in moisture content and NDF per centimeter. After 60 days-ensiling, C45 showed significantly lower NH₃-N concentrations. Moreover, C45 had significantly higher lactic acid concentration, lactic acid/acetic acid ratio, and lactic acid bacteria count compared to the control. Mold was not detected and the yeast count was less than 2 log10 cfu/g fresh matter in both control and C45. In summary, C45 improved the feeding value and fermentation quality of whole-crop corn silage at the expense of forage productivity.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.389-401
• /
• 2011

Most nations around the world have expressed significant concern in the climate change due to a rapid increase in green-house gases and thus reach an international agreement to control total amount of these gases for the mitigation of global warming. As the most important absorber of carbon dioxide, one of major green-house gases, forest resources should be more tightly managed with a means to measure their total amount, forest biomass, efficiently and accurately. Forest biomass has close relations with forest areas and tree height. Airborne LiDAR data helps extract biophysical properties on forest resources such as tree height more efficiently by providing detailed spatial information about the wide-range ground surface. Many researchers have thus developed various methods to estimate tree height using LiDAR data, which retain different performance and characteristics depending on forest environment and data characteristics. In this study, we attempted to investigate such various techniques to estimate tree height, elaborate their advantages and limitations, and suggest future research directions. We first examined the characteristics of LiDAR data applied to forest studies and then analyzed methods on filtering, a precedent procedure for tree height estimation. Regarding the methods for tree height estimation, we classified them into two categories: individual tree-based and regression-based method and described the representative methods under each category with a summary of their analysis results. Finally, we reviewed techniques regarding data fusion between LiDAR and other remote sensing data for future work.

• 화훼연구
• /
• 제18권3호
• /
• pp.165-170
• /
• 2010

키가 큰 절화용 백합인 'Rialto'와 'Elodie' 및 'Raizan'을 분화 및 화단용으로 사용하기 위하여 ancymidol과 uniconazole 및 paclobutrazol을 농도별로 관주처리 하였다. 오리엔탈 백합인 'Rialto'의 경우, paclobutrazol을 처리한 구에서는 초장뿐만 아니라 잎과 꽃에 있어서도 변화를 관찰할 수 없었다. 그러나 ancymidol 처리구에서 생장은 농도에 관계없이 30% 이상 억제되었다. 한편 엽수나 개화수 등은 무처리구와 비슷한 경향이었다. Uniconazole $1mg{\cdot}L^{-1}$ 처리구에서 초장은 무처리구와 비슷한 경향이었으나 5와 $10mg{\cdot}L^{-1}$ 처리구에서는 30%정도 단축되었다. 아시아틱 백합인 'Elodie'의 경우 'Rialto'와 마찬가지로 paclobutrazol 처리구에서는 무처리구와 유의차를 관찰할 수 없었다. 한편 모든 ancymidol 관주처리구에서는 초장이 무처리구보다 50~60% 단축되는 효과를 나타내었다. 그리고 $30mg{\cdot}L^{-1}$의 ancymidol 처리구에서는 엽수가 감소하였으며 개화소요일수도 무처리구보다 다소 지연되었다. Uniconazole $1mg{\cdot}L^{-1}$ 처리구에서 초장을 제외한 모든 형질들은 무처리구와 유사하였지만 5와 $10mg{\cdot}L^{-1}$ 처리구에서는 무처리구와 유의차가 인정되었다. 신나팔나리인 'Raizan' 또한 상기의 두 품종과 마찬가지로 paclobutrazol 처리구에서는 왜화효과를 관찰할 수 없었다. Ancymidol 처리구는 농도에 관계없이 초장이 무처리구보다 60% 이상 단축되었으며 특히 $30mg{\cdot}L^{-1}$ 처리구에서는 개화소요일수가 다소 지연되었다. Uniconazole $10mg{\cdot}L^{-1}$ 처리구에서 초장은 약 26% 감소하였으나 다른 형질은 무처리구와 유의차가 없었다. 결과적으로, ancymidol과 uniconazole의 관주 처리는 양적 형질에 큰 변화 없이 초장을 줄여 분화용 백합으로 사용하기 위해서 매우 효과적이었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1095-1096
• /
• 2008

By adding height compensation to the usual 3 points skew adjustment device, an improved functional skew adjustment device is implemented in this paper. The proposed skew adjustment device is for traverse which will be adapted to BD and HD player system requiring more accuracy. and It can adjust not only R/T skew but also height. The system is composed of personal computer, control box, kinematic mechanism device and bar-code reader device. Application programs are implemented by visual basic.

• 생물환경조절학회지
• /
• 제19권4호
• /
• pp.240-245
• /
• 2010

절화장미의 새로운 수경재배 방식으로 용기재배를 제시하기 위하여 배수구의 높이와 적정 배지를 설정하는 두가지 시험을 수행하였다. 용기재배 시 적정한 배수구 높이를 설정하기 위하여 규격이 $30{\times}30{\times}25cm$인 사각용기에 배수구를 0, 3, 6, 9cm 높이로 처리하였을 때 수량은 3cm 배수구 처리가 많았으나 절화품질은 처리간 차이가 발생하지 않았다. 정식후 생존율은 각각 100, 100, 92, 92%였다. 배수구 높이와 배지조성의 관계를 구명하기 위하여 배수구 높아가 0, 3cm인 용기에 배지을 코이어와 펄라이트 단용 및 혼용하여 7가지 배지를 조성하였다. 수분센서를 이용하여 수분함량이 -5kPa에 도달했을 때 급액을 했을 때 코이어 혼합비율이 높은 배지와 3cm 배수구 높이 처리가 급액횟수가 감소하였다. 화중을 제외한 절화의 상품성과 2차 수확까지의 절화 수량은 배수구의 높이에 따른 차이는 인정되지 않았고 3차 수확이후의 수량은 3cm 배수구 처리가 많았다. 배지별로는 코이어의 혼합 비율이 높은 처리에서 수량과 상품성이 우수하였다. 수량은 배수구를 높인 처리구가 절화품질과 수량이 많았으며, 펄라이트의 혼합비율이 높은 배지에서 수량이 감소하는 경향을 나타내었다.