• 한국자원식물학회지
• /
• 제22권1호
• /
• pp.5-12
• /
• 2009

종자 priming은 발아율을 향상시킬 뿐만 아니라 빠르고 균일하게 하는 유용한 종자처리기술로서 조경적 가치가 뛰어난 팥배나무 종자의 번식 효율성을 위해 다양한 발아촉진법을 개발하기 위해 실시하였다. Priming 처리를 위해 NaCl, $CaCl_2$, $KNO_3$, PEG(polyethylene glycol)을 이용하여 농도에 따라 각각 2일과 3일간 처리하였으며, 실험종료 후 발아특성 및 유묘생장특성을 분석하였다. 발아율은 $KNO_3$ 100 mM 2일 처리구에서 24%로 가장 높게 나타났으나, 평균발아일수는 $KNO_3$ 200 mM 2일 처리에서 가장 높았다. 발아속도와 발아균일지수 역시 $KNO_3$ 100 mM 2일 처리구에서 가장 높은 값을 보여 발아특성 증진에는 $KNO_3$가 적정한 처리제임을 짐작하였다. Priming 처리된 종자로부터 생장한 유묘들을 대상으로 상대생장율과 유묘활력지수를 조사한 결과 무처리구와 차이를 나타내었는데(p<0.05), 상대생장율(수고 및 근원경)의 경우 NaCl 400 mM 2일 처리구에서 가장 높은 값을 보였으며, 유묘활력지수는 발아율에서 가장 높았던 $KNO_3$ 100 mM 2일 처리구가 가장 높게 나타났다. 결과적으로, priming 처리를 위한 염류(NaCl, $CaCl_2$, $KNO_3$, PEG) 중 팥배나무의 종자 발아 및 유묘의 생장에 영향을 미치는 적정 처리제는 $KNO_3$로 판단되었으며, 적정처리조건은 100 mM 2일처리였다.

• 대한치과보철학회지
• /
• 제39권1호
• /
• pp.71-83
• /
• 2001

The purpose of this study was to compare the effects of various surface treatments by measuring removal torque on bone healing around titanium implants. 40 Screw-shaped cp titanium implants with length of 4mm, outer diameter of 3.75mm, and pitch-height of 0.5mm were used Group 1 was left as machined(control), Group 2 was blasted with $50{\mu}m\;Al_2O_3$, group 3 was blasted and etched in etching solution($NH_4OH : H_2O_2:H_2O= 1 : 1 : 5$) at $90^{\circ}C$ for 1 minute group 4 was blasted and oxidated under pure oxygen at $800^{\circ}C$. The implant surface roughness was analyzed with SEM and CLSM(Confocal Laser Scanning Microscope) and implants were placed in proximal tibial metaphysis of 10 New Zealand White rabbits. After 3 months of healing period, removal torque of each implant was measured to compare bone healing around implant. The results obtained were as follows 1. In SEM view, blasting increased the roughness of the surface, but etching of that rough surface decreased the roughness due to the removal of the tip of the peak. Oxidation also decreased the roughness due to formation of needle-like oxide grains on the implant surface. 2. The Sa value from CLSM was least in the machined group($0.47{\mu}m$), greatest in blasted group($1.25{\mu}m$), and the value decreased after etching($0.91{\mu}m$) and oxidation($0.94{\mu}m$). 3. The removal torque of etched group(24.5Ncm) was greater than that of machined group(16.7Ncm) (P<0.05), and was greatest in the oxidated group(40.3Ncm) and the blasted group(34.7Ncm).

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.260-272
• /
• 2001

All-ceramic restorations have had a more limited life expectancy than metal ceramic restorations because of their low strength. Their relatively lower strength and resistance to fracture have restricted the use of all-ceramic crowns to anterior applications where occlusal loads are lower. But there has been increasing interest in all-ceramic restorations because patients are primarily concerned with improved esthetics. Many efforts have been made to in prove the mechanical properties of dental ceramics. This study was designed to elucidate the influence of the luting agent on the strength of the Empress 2 crown (staining technique) cemented on human teeth. Seventy extracted human permanent molar teeth were chosen. Teeth were prepared for Empress 2 crowns with milling machine on a surveyor. A dental bur was placed in the mandrel that was positioned so that the long axis of the bur was perpendicular to the surveyor base. Dimensions of the Empress 2 crown preparation were $6^{\circ}$ taper on each side, $1.5{\pm}0.1mm$ shoulder margin, and 4mm crown height. The luting cements used in this study were as follow: 1. Uncemented 2. Zinc phosphate cements (Confi-Dental) 3. Conventional glass ionomer cement : Fuji 1 (GC) 4. Resin-modified glass ionomer cements : Fuji plus (GC) 5. Adhesive cements : Panavia F (Kuralay), Variolink II (Vivadent), Choice (Bisco). Fracture test using Instron. The crowns were loaded in compressive force to evaluate the effect of these cements on the breaking strength of these all-ceramic crowns. A steel ball with a diameter of 4mm was placed on the occlusal surface and load was applied to the steel ball by a cylindrical bolt with a crosshead speed of 0.5mm per minute until fracture occurred. The fractured surface was examined using Scanning Electron Microscopic Image (SEM) to discover the correlation between fracture strength and bonding capacity. Within the limitation of this in vitro study design, the results were as follows : 1. fomentations significantly increased the fracture resistance of Empress ceramic crowns compared to control. Uncemented (206.9 N): ZPC (812.9 N): Fuji 1 (879.5 N): Fuji Plus (937.7 N): Choice (1105.4 N): Variolink II (1221.1 N): Panavia F (1445.2 N). 2. Resin luting agent, treated by a silane bond enhancing agents, yielded a significant increase in fracture resistance. In some of the Panavia F group, a fracture extended into dentin. 3. According to SEM images of fractured Empress crowns, the stronger the bond at both interfaces(crown and die), the more fracture strength was acquired.

• 한국산림과학회지
• /
• 제102권2호
• /
• pp.161-169
• /
• 2013

본 연구에서는 남강댐 저수지 일원의 버드나무류 군락의 현황 및 문제점을 조사 분석하고, 버드나무류의 생장 특성분석 결과를 기초로 남강댐 저수지 일원의 버드나무류 군락의 특성과 토양의 이화학성을 파악하기 위하여 수행하였다. 조사대상 4개 지역 전체의 평균본수는 5,284본/ha로 조사대상지역 모두 밀도관리가 시급한 것으로 분석되었다. 4개 조사대상지역의 평균수관면적은 9,786.4 $m^2/ha$로 진양호 수변구역에서 버드나무류의 수관이 차지하는 면적은 단위면적을 거의 차지하는 것으로 나타났다. 대조구인 산림지역의 평균토심 12.5 cm와 비교할 때 조사대상 4개 지역의 평균토심은 78 cm로 대조구인 산림지역과의 평균토심은 약 65.5 cm의 차이가 나타났는데, 이는 퇴적토사의 깊이로 추정할 수 있다. 또한 진양호수변구역의 버드나무류가 생장하고 있는 토양은 일반적인 산림토양보다 토양용적밀도가 높게 나타났는데, 이는 그만큼 토사퇴적으로 인한 사질토 함량의 증가 등 토양의 경화가 이루어진 결과라 사료된다. 조사지역의 pH는 산림지역의 경우 A층이 5.3, B층이 5.2로 약산성에 해당하나, 조사대상지역의 A층과 B층토양의 pH는 평균 모두 6.7로 주변 산림토양보다 중성에 가까운 값을 나타내었는데 이는 퇴적토사 즉, 진양호에 유입되는 생활하수에 사용되는 세제 성분 및 인근 지역으로부터 유입된 비점오염원이 퇴적된 데 따른 영향에 기인하는 것으로 사료된다.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.936-942
• /
• 2018

The diagnostic multi-leaf collimator preventing unnecessary dose from entering into patients during the diagnostic examination was made in this study. The movement of the entire 50 leaves was embodied with the group of 25 ones thereof configured in a pair facing each other on the left and right of the median line. Dimensions of the length, width, and height of each shielding leaf were $5{\times}0.5{\times}0.5cm^3$ resulting in the maximum boost field of $10{\times}10cm^2$. The material of multi-leaf collimator had the excellence on the machinability with the use of the SKD-11 alloy tool steel having the high wear resistance against frequent movement, and it was devised to control both-side's shielding leaves by moving 2 motors unlike existing remedial multi-leaf collimator that use as many motors as the number of 50 shielding leaves. Thereafter, the transmission dose of leaves, cross-leaf leakage dose, and inter-leaf leakage dose were measured by the developed multi-leaf collimator attached to X-ray equipment. An ionization chamber was used to detect doses there from, and the comparative analysis was carried out by means of the radiographic film that was easy to detect the dose leakage in between each leaf. Results obtained from the test conducted in comparative analysis yielded approximately 98%, 96%, and 94% of shielding efficiency realized at each level of energy of 80kV, 100kV, and 120kV it was confirmed there was no dose leakage resulted from the varied level of irradiation energy. Thus the multi-leaf collimator to be developed based on this study is thought that it could fully reduce the unnecessary dose to patients in the diagnostic test and the shielding efficiency thereof is expected to be increasing if it is made in a miniaturized form with a way of increasing the thickness of each leaf later for an extended application to general diagnostic purposes.

• 한국동물학회지
• /
• 제8권1호
• /
• pp.1-7
• /
• 1965

The short-necked clam is distributed widely in Korean tidal flats and it is a much an important bivalve quantitatively as to control the production of the tidal flat. The shell of this clam tends to show remarkable morphological variations depending on the habitat. Under a seemingly favorable condition for the growth , the color pattern of shell of the clam is clear and obvious and having less weight and elongated shape, the ratios of shell length to both height and width are small . On the contrary , when the environment appears to be an unfavorable one, the shell is found to be heavy and stunted with smudgy color pattern. If this correlation between could be a basis for the judgement in suitability of growth environment for the clam. In the Ikawazu Bay, Japan, it is revealed that the elongated shell is produced from the coast outside of the Bay (1) , the stunted from the esturay (2) and the intermediate from the floodgate area (3) and the middle of the Bay (4). Followings are the results obtained from the morphological investigation of the claim in this Bay. 1. Relationship between the shell length and the largest shell rib length is linear and between the shell length and the shell width is also linear but with a critical point at the shell length of 17-20 mm. The ratio between the width and the largest rib length at a given shell length increases with the order of 1, 3, 4, and 2. 2. A gradual decreases of the ratio of the shell length to the largest rib length is observed when the former is less than 17-18 mm, and this ratio increases with the shell of longer. Also there is a different range of this ratio in each different location ; the greatest range in 2, the smallest in 1 and 4 being in between. 3. A similar biometric finding is apparent with the ratio between the length and width of the shell and the order in value is 2, 4, 1 and 3. 4. The ratios between the length and the largest rib length of elongated and stunted shell are 0.84-0.86 and 0.89-0.92, respectively , and those between the length and width are 0.40-0.51 and 0.49-0.58, respectively. 5. Generally , the elongated short necked clam shells are products of the tidal flat of good circulation of sea water with high salinity and smaller fluctuations of salinity and temperature within a day. The stunted shells are produced for tidal flats of opposite of above conditions.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권3호
• /
• pp.265-273
• /
• 2000

Purpose : The aim of this study was to evaluate the bone mineral density of iliac and tibial bone which are frequently selected as autogenic bone graft donor sites, and to evaluate the efficiency of this method as a guideline for the selection of bone graft donor site. Materials and Methods : In this study 61 male and 70 female volunteers at Chungbuk National University Hospital were involved between Jan. 1998 to Sept. 1999. We measured bone mineral density of the iliac and the tibial bone using dual energy X-ray absorptiometry. We evaluated the data using the SAS system for Windows and bone mineral density of the lumbar was used for control. Results : Age showed the highest correlation in correlation matrix between physical and bone variables. Height and weight showed lower correlation of linear increment. In man, the change of bone density according to age demonstrated linear decrease irrespective of the lumbar, ilium, and tibia. In woman, the change of bone density according to age showed cubic form, which increased in the third and forth decade. So it had a peak bone mass on about 35 year-old, thereafter, the change of bone density slowly decreased until 50 year-old, but it rapidly decreased after 50 year-old and it slowly decreased again after 65 year-old. Both in all subjects and subject with osteoporosis, the change of bone mineral density according to age showed statistically significant decrease in lumbar and tibia, but ilium was irrespective. Conclusion : In patients of aged or with osteoporosis, ilium demonstrated less tendency of decrease in bone mineral density than tibia. So this preliminary study suggested that ilium seemed better donor site for autogenic bone graft than tibia.

• 대한지역사회영양학회지
• /
• 제24권6호
• /
• pp.465-475
• /
• 2019

Objectives: This study investigated dietary and lifestyle factors associated with the weight status among Korean adolescents in multicultural families. Methods: This cross-sectional study analyzed 1,751 multicultural families' adolescents who participated in the 2017-2018 Korea Youth Risk Behavior Surveys. Information on dietary and lifestyle factors was self-reported using a web-based questionnaire and this information included breakfast and foods consumption, perceived health status, alcohol drinking, smoking, physical activity, and weight control efforts. Body mass index (BMI) was calculated based on the self-reported height and body weight (kg/㎡). Weight status was assessed according to the 2017 Korean National Growth Chart: underweight (weight-for-age <5^th percentiles), overweight (85^th≤ BMI-for-age <95^th percentiles), and obese (BMI-for-age ≥95^th percentiles). Multiple logistic regression analysis was performed to examine the dietary and lifestyle factors associated with weight status after adjustment for covariates. Results: Among Korean adolescents from multicultural families, the prevalence of overweight/obesity was 20.9%, whereas about 7% of adolescents were underweight. The weight status did not show differences according to gender, school level, area of residence, and household income. Compared to adolescents who did not have breakfast during the previous week, those who had breakfast 3-4 days/week and ≥5 days/week had a 42% (p=0.021) and a 37% (p=0.009) lower prevalence of overweight/obesity, respectively. The adolescents who frequently consumed carbonated soft drinks (≥5 times/week) showed an odds ratio (OR) of 1.69 (95% CI=1.01-2.83) for overweight/obesity relative to those adolescents who did not consume carbonated soft drinks. The OR of being underweight for adolescents who ate fast food ≥3 times/week was 1.97 (95% CI=1.04-3.71) compared to those adolescents who had not eaten fast food during the previous week. Conclusions: Dietary and lifestyle factors were associated with overweight/obesity as well as underweight among Korean adolescents in multicultural families. Our findings could be used to design and provide nutrition interventions for this specific population.

• Journal of Radiation Protection and Research
• /
• 제26권4호
• /
• pp.409-415
• /
• 2001

저선량 방사선 조사가 묵은 고추종자의 발아율과 발아종자의 생리활성에 미치는 효과 등을 알아보고자 4년 저장한 조광고추와 3년 저장한 홍광고추 종자에 저선량 ${\gamma}$선을 $2{\sim}50Gy$ 까지 조사하여 관찰한 결과는 다음과 같다. 저선량 조사한 고추종자의 발아율은 대조구보다 증가하는 경향을 보였다. 특히 발아초기에 그 효과가 뚜렷하게 나타나 파종 7일 후에 조광고추 품종은 4Gy 조사구에서 74%, 홍광고추 품종은 8 Gy 조사구에서 11% 증가하였다. 고추의 유묘초장에서도 거의 모든 저선량 조사구에서 증가하였는데 특히 조광고추 품종은 4 Gy 조사구에서, 홍광고추 품종은 8 Gy 조사구에서 유의성있는 증가효과를 보였다. 저선량 조사한 종자의 단백질 함량은 조광고추 풀종은 발아후기에, 홍광고추 품종은 발아초기에 증가하였고, catalase와 peroxidase 활성은 조광고추 품종은 4 Gy 조사구에서, 홍광고추 품종은 8 Gy 조사구에서 높은 값을 보였다. 이에 저선량 ${\gamma}$선 조사에 의해 묵은 종자의 발아와 생리활성이 촉진됨을 확인할 수 있었다.

• 한국자원식물학회지
• /
• 제22권6호
• /
• pp.483-488
• /
• 2009

The main objective of this breeding program is to develop high yielding, disease resistance and good processing potato cultivar. 'Gui Valley' is a clonal selection resulting from a cross between 'ND2471-8' and 'Cona'. It has medium plant height and light green foliage. 'Gui Valley' has medium flowering habit and light pink flowers. 'Gui Valley' is a medium maturing potato cultivar and tubers are smooth, yellow skin, light yellow flesh, long-oval tuber shape, distinct red eyes with medium depth and medium dormancy. It has high level of tuber uniformity and good keeping quality. 'Gui Valley' demonstrates resistance to potato virus Y (PVY), soft rot, but moderately susceptible to late blight and common scab. It is also resistant to most of the internal and external physiological disorders particularly dehiscence, hollow heart and internal brown spot. The specific gravity of 'Gui Valley' is significantly higher (1.097) than that of 'Shepody' (1.078). 'Gui Valley' has suitable for processing mainly French fries and chips. This cultivar has high level of tuber uniformity and capable of yielding 37.6 $t{\cdot}ha^{-1}$, which is 18.2% higher than the control potato cultivar 'Shepody' under optimum agronomical practices.